Audioengine P4 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Audioengine P4 (6 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
Setup Guide
© 2009 Audioengine Corp. All Rights Reserved.
Copyright Notice
Audioengine and Audioengine AP4 are trademarks of Audioengine Ltd.
Audioengine, Ltd.
support@audioengineusa.com
www.audioengineusa.com
Contents
Introduction Page 1
Features Page 1
Package Contents Page 1
Unpacking Page 2
Speaker Placement Page 3
Connections Page 4
Operation Page 6
Cleaning Page 7
Specications Page 7
Contact Us Page 7
Warranty Information Page 8
audioengine P4 setup guideaudioengine P4 setup guide 1
Introduction
Welcome to the Audioengine family and congratulations on your purchase
of the Audioengine P4 Premium Passive Bookshelf Speakers! The Audioen-
gine team is dedicated to bringing you the highest quality listening experi-
ence possible and the Audioengine P4 (AP4) speakers were designed with
the same attention to detail and operational simplicity as other Audioengine
products. As with our other past eorts we thank our customers, distributors
and resellers for inspiring us to create another great Audioengine product.
All Audioengine active and passive speaker models share a similar “voicing
or tuning so that you are assured a matched system no matter which of our
speakers or Audioengine wireless adapters you decide to add to your
system.
Audioengine P4 Features
4” 2-way passive, front-ported design
Hand-built and custom nished cabinets
5-way gold-plated binding posts
Silk dome tweeters and Kevlar woofers
Magnetically-shielded
Excellent performance for music and movies
Package Contents
2 – AP4 Passive Speakers
2 – Drawstring Speaker Bags
1 – Setup Guide
Speaker Placement
Although the AP4’s are very forgiving, it’s true that proper speaker place-
ment can have a big impact on sound quality. There seem to be quite a few
theories on correct speaker placement but all rooms and tastes are dierent
so it’s impossible to recommend a perfect placement. We do suggest you
feel free to experiment to see what works for you.
As a general rule of thumb for the best soundstage balance the speakers
should be equi-distant from side walls and a dierent distance from rear
walls. The tweeters should be at about eye-level in your most frequent listen-
ing location and for the best bass response on Audioengine P4, we recom-
mend that you keep the front panel area around the bass port slots clear.
Both speakers should be equi-distant from your primary listening position.
Placing the speakers at least 6 feet (1.8m) apart usually provides the best imaging.
Try pointing them inward slightly toward the listening position.
If you need to turn the speakers on their sides, position the tweeters toward the
outside.
Try to keep the speakers near the front edge of shelves or cabinets.
Keep the speaker wire away from power cords and signal cables to reduce potential
interference.
Unpacking
Your Audioengine speakers were carefully tested and inspected before
packaging and shipping. After unpacking please check for any damage. It is
rare that any damage occurs during shipping, but if this does happen
contact the shipping company immediately. We recommend that you keep
the original carton and packing material.
audioengine P4 setup guideaudioengine P4 setup guide2 3
LEFT SPEAKER RIGHT SPEAKER
REAR
FRONT
LR
40°–60°
Listening Position


Product specificaties

Merk: Audioengine
Categorie: Speaker
Model: P4
Kleur van het product: Zwart
Breedte: 140 mm
Diepte: 165 mm
Hoogte: 228 mm
Gewicht verpakking: 7250 g
Breedte verpakking: 460 mm
Diepte verpakking: 228 mm
Hoogte verpakking: 330 mm
Materiaal behuizing: MDF
Connectiviteitstechnologie: Bedraad
Gemiddeld vermogen: - W
Plug and play: Ja
Aanbevolen gebruik: Universeel
Impedantie: 4 Ohm
Geschikt voor buitengebruik: Nee
Audio-uitgangskanalen: 2.0 kanalen
Speaker plaatsing: Ceiling-mountable, Floor, Tabletop/bookshelf, Wall-mountable
Woofer: Ja
Frequentiebereik: 58 - 22000 Hz
Gevoeligheid: 88 dB
Soort magneet: Neodymium
Luidspreker soort: 2-weg
Versterker: Ingebouwd
Diameter woofer: 4 "
Diameter hogetonenluidspreker: 0.75 "
Magnetisch afgeschermd: Ja
Tweeter: Ja
Crossover frequentie: 2800 Hz
Luidspreker gewicht: 2750 g

Heb je hulp nodig?

Als je hulp nodig hebt met Audioengine P4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Audioengine

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Canton

Canton GLE 476 Handleiding

17 November 2024
Berker

Berker 29807009 Handleiding

17 November 2024
Berker

Berker 29807006 Handleiding

17 November 2024
Berker

Berker 30801606 Handleiding

17 November 2024
Berker

Berker 29806086 Handleiding

17 November 2024
Berker

Berker 30809909 Handleiding

17 November 2024
Berker

Berker 29801606 Handleiding

17 November 2024
Berker

Berker 30808989 Handleiding

17 November 2024
Berker

Berker 29807003 Handleiding

17 November 2024
Berker

Berker 30806089 Handleiding

17 November 2024