AudioControl TXGM19D10 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor AudioControl TXGM19D10 (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
INSTALLATION GUIDE
NOTE! Read this installation guide thoroughly before disassembling or modifying the
vehicle. Installation of this product requires technical skill, experience and specialized
tools. If in doubt, it’s recommended to have it professionally installed by an authorized
Stinger AudioControl or Dealer.
TXGM19D10
A video installation guide is available at:
Dual 10 nder Seat Subwoofer EnclosureU
F GM Crew Cab Trucksor Chevrolet
2019+ Sierra / Silverado 1500
2020+ Sierra / Silverado 2500 / 3500
2
M6 FLANGED HEX HEAD BOLT (2)
75mm / 2.95in Length ENCLOSURE MOUNTING BRACKETS (2) QUICK-PLUG SPEAKER CONNECTOR (1)
INSTALLATION NOTES
INCLUDED HARDWARE
RECOMMENDED TOOLS
Ratchet
13mm Socket
10mm Socket
10mm Wrench
Wire Strippers
Optional:
Wire Crimper
Solder/Solder Gun
The TXGM19D10 is designed to mount under the rear seat of GM Crew Cab Trucks.
Some installation steps are more easily completed with a second person.
Speaker wire is required.
Final enclosure impedance: 2ohms.
Recommended amplier rating: 600-1,400 watts @ 2ohms.
1 2 3
4
D = Driver P = Passenger
M8 Nut (1) and a M8 Washer (1)
to be used on Step 5 to secure D-bracket
3
INSTALLATION
Step 2 (Skip this step if there is no
storage tray)
Step 1
Lift up the Rear seat to expose the jack
and the tool bag.
With a 10mm socket, remove the 2 nuts holding
the jack in place. Place the 2 nuts in a secure
location as they will be needed to remount the
jack. Lift straight up and remove the Jack.
Remove the storage tray. Reinstall the Jack.
Jack
Tool Bag
10mm Nuts
Front Nut
Plastic Nut
Tool Bag
Spring Clip
Locate the plastic nut holding the tool bag in
place. Remove the plastic nut and keep in a
secure location for assembly later. Remove the
tool bag and spring clip and set aside. Locate the
plastic nut on the front left corner of the storage
tray. With a 10mm socket remove the plastic nut.
Plastic Nut


Product specificaties

Merk: AudioControl
Categorie: Niet gecategoriseerd
Model: TXGM19D10

Heb je hulp nodig?

Als je hulp nodig hebt met AudioControl TXGM19D10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd AudioControl

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd