Audio-Technica AT882TH/DS3RC5 Handleiding

Audio-Technica Microfoon AT882TH/DS3RC5

Lees hieronder de 📖 handleiding in het Nederlandse voor Audio-Technica AT882TH/DS3RC5 (2 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Description
The AT882TH/DS3RC5 requires a phantom power supply of 11–52V DC for the element. Output is low-
impedance balanced. The Right channel signal appears across the XLR connector Pins 2 and 3, while the ground
(shield) connection is Pin 1. The Left channel signal appear across the red and yellow wires; audio ground is the
shield connection. Output is phased so that positive acoustic pressure produces positive voltage on the yellow
wire. The small-diameter black and blue wires are the contact closure. The white wire is the LED control.
Each of the element in the microphone is shock mounted. The Hypercardioid polar pattern of the elements
provides a 100°angle of acceptance. The AT882TH/DS3RC5 is designed with integral wind-screens to ensure
maximum security against wind noise and plosives.
The microphone features a rubber switch that toggles between on/mute in Right channel and a LED indicator
that displays On status. The switch is also programmable external contact closure and another side LED
indicator. The microphone's external contact closures capability permits control of remote devices. The AT882TL/
DS3RC5 is enclosed in a sturdy metal housing with a low-reflectance black finish. Its base is a desk stand that
connected with two 1 meter cables permanently attached to microphone. The XLRM output cable is used for
Right side element and Unterminated cable for Left side element. The blue and black wires are used for contact
closure, Closed when pressed or Opened when not pressed. The white wire is used for indicator lights red when
logic high (+5V DC) and white when logic low (0V DC).
Avoid leaving the microphone in the open sun or in areas where temperatures exceed 43°C for extended
periods. Extremely high humidity should also be avoided.
Features
Designed for quality sound reinforcement in demanding situations, conferencing, especially
those requiring separate miking for PA and broadcast.
Dual-element Hypercardioid condenser microphone with two independent power modules.
A rubber switch with LED allows users to easily mute/un-mute the Right channel signal of
microphone, and a logic control for remote devices of Left channel.
Integral, phantom-powered, Red LED indicator.
Integral windscreens ensure ultimate security against wind noise and plosives.
Small-diameter rigid-pipe design with pivoting ball-in-socket base permits flexible positioning.
Heavy die-cast case and rubber bottom pads minimize coupling of surface vibration to the
microphones.
Specifications
Element Dual back electret condenser
Polar pattern Hypercardioid (Unidirectional)
Frequency response 20-20,000 Hz
Open circuit sensitivity -35 dB (17.8 mV) re 1V at 1 Pa
Impedance 100 ohms
Maximum input sound level 130 dB SPL, 1 kHz at 1% T.H.D.
Signal-to-noise ratio >66 dB, 1 kHz at 1 Pa
Phantom power requirements 11-52V DC, 2 mA typical
Switch Push button control: Right Channel on/mute
Remote switch contact closure
Left Channel
Closed circuit in switch pressed /
Opened circuit when not pressed
Remote LED input
Maximum input voltage
Red light up when high (+5V DC), Unlit when low (0V DC),
-0.5V to 5.5V
Weight 1.14 kg
Dimensions 354 mm - long, 345 mm - Max. height, 102 mm - Width
Cable 2 x 1.0 m long (permanently attached to microphone),
Output connector 3-pin XLRM-type (Right channel - muteable)
Unterminated 5-wires (Left channel direct output)
polar pattern
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
10 dB
20k10k5k2k1k50020010050
LEGEND
frequency response
Frequency in Hertz
Response in dB
12” or more on axis
Audio-Technica Corp. Machida Tokyo Japan 2019 DEC FORM No. ATGC-L0376-19-E
Left channel output:
Black: control ground
White: LED control
Blue: contact closure
Red: cold(-)
Yellow: hot(+)
Shield: audio ground
Rigth channel output:
Pin 1: ground Pin 2: hot(+)
Pin 3: cold(-)
Operation and Maintenance
In addition to the microphone status display, the LED can also be controlled from the actual pickup status of
external equipment (RED light indicates that the Left and Right channels are On and working normally, and
GREEN light indicates that the Right channel is On).only
During operation, if a Green light appears after the button is switched. It is recommended to press switch again
to restart the left channel. When the left channel is turned on, the right channel is forced to turn on at the same
time to achieve dual channel forced synchronization. *To avoid the switch link error, the connection of
microphone needs to connect the phantom power supply of the XLRM Right channel connector, and
then connect the Left channel external control.
Optional Accessories:
ATUC-50IU Integration unit for the ATUC-50
conference system
Dual-element Hypercardioid Condenser Microphone (with Remote Switching and LED)
AT882TH/DS3RC5
AT882TH/DS3RC5 使11V 52V
阻抗平衡输出。右通道信号以卡农公头的2号及3号针脚输出,而1号针脚则为地线
( ) 。 通 线 线 线 (
频)连接;输出相位将以正相位电平设于黄色的空接线上;黑色和蓝色空接线为外
接开关控制,而白色空接线为LED显示灯外接控制。
话筒内配置有两路超心形指向的收音头, 可以提供 100°
声及风声,AT882TH/DS3RC5设有双网层防风罩作保护。
控制线作遥距控制。
1 线3
线 线
线 线
时为断路。而白色接线为 LED显示灯外接控制,接上高电位时(直流+5V )
电位时(直流0V )为白色。
地方或长时间置于温度超过4 3 ° C的地方,极高湿度也应避免。
技术指标
收音头
双元件背板静电型电容式
20-20,000 Hz
-31 dB (28.2 mV) 1V 1 Pa
100
126 dB , 1 kHz 1% T.H.D.
信噪比
>69 dB, 1kHz 1 Pa
11-52V, 2 mA
(R) - / :
(L) -
远程开关接点控制
按下时保持双通道导通;
无按下时为双通道断路
LED
(+5V) /
(0V)
-0.5V 5V
1.22
214 mm - , 227 mm - ,
102 mm -
连接线
21 ) (
(R) : 3
(L)/ :
声压曲线1刻度5 dB
频率
10 dB
20k10k5k2k1k50020010050
电平
频率 (赫兹)
响应电平 (dB)
平直
双音头超心形指向性电容话筒(LED)
AT882TH/DS3RC5
广广
LED
作 左
LED
整合了双网层防风罩,可减低环境噪声及风声。
收音位置,以达到最佳收音效。
震动声。
黑色: 控制地线
白色: LED 显示控制
蓝色: 外接开关
红色: 反相位电
黄色: 正相位电
屏蔽: 音频地线
针脚1:
反相位电
针脚2:
正相位电
针脚3: 音频地线
LED 显示灯除了作通话状态显示外,亦可作为外置器材的实际收音状态显示 (红灯
/ 绿 示 右 ) 只 有
键切换后出现绿 ,建议多按一次重启左通道;开启左通道会同时强制开启右通
*
为避免出现开关链接误差,连接话筒时,请先连接右
接 通
选择配件:
ATUC-50IU - 数字会议系统ATUC-50的嵌
入式单元。
FORM No. ATGC-L0376-19-CAudio-Technica Corp. Machida Tokyo Japan 2019 DEC


Product specificaties

Merk: Audio-Technica
Categorie: Microfoon
Model: AT882TH/DS3RC5

Heb je hulp nodig?

Als je hulp nodig hebt met Audio-Technica AT882TH/DS3RC5 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Microfoon Audio-Technica

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon