ATT AT&T 1740 Handleiding
ATT
Antwoordapparaten
AT&T 1740
Lees hieronder de 📖 handleiding in het Nederlandse voor ATT AT&T 1740 (12 pagina's) in de categorie Antwoordapparaten. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/12
© 2011 Advanced American Telephones. All Rights Reserved.
AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to
Advanced American Telephones, San Antonio, TX 78219.
Message Guard® is a registered trademark of Advanced American Telephones.
Printed in China. Issue 4 AT&T 12/11.
www.telephones.att.com
Part 2
User’s manual
1740 Digital answering system
This manual contains information about this
product’s installation and operation. Please also
read .Part 1- Important product information
For customer service or product information, visit
our website at or www.telephones.att.com
call . In Canada, dial 1 (800) 222-3111
1 (866) 288-4268.
Installation
Parts list
1740 answering system
Wallet card
Part 1 Important product information
Part 2 User’s manual
Power adapter
Before you install
Choose a location for the answering system near a telephone jack and a standard
electrical outlet not controlled by a wall switch.
•
•
•
•
•
Use only the power adapter supplied
with this product. To obtain a
replacement, visit our website at
or call www.telephones.att.com
. In Canada, dial 1 (800) 222-3111
1 (866) 288-4268.
1
NOTES:
Power adapter - Input: 117V AC, 60 Hz / Output: 6V AC, 350 mA.
If the message window is off, make sure the power adapter is securely connected to both the
answering system and an electrical outlet not controlled by a wall switch.
If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone
line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The
filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL
service provider for more information about DSL filters.
•
•
•
Press ON/OFF to turn the system on or off. If the system is on, the
ON/OFF indicator light is on. If the system is off, the indicator light is off and
the message window is blank. When the system is off and you press any key
(except ON/OFF), it announces, “The machine is off. Press ON/OFF to turn on.”
After you install the answering system for the first time, the system turns on
automatically and announces, “ .” See To set the clock, press CLOCK Set the
clock on page 2 for instructions.
To record your own announcement (optional), see Record your announcement
on pages 2-3 for instructions.
To program other system features (optional), see pages 3-4 for details.
4
5
6
7
Connect the power adapter.
Standard electrical outlet not
controlled by a wall switch.
Strain-relief tab for protecting
the power cord.
Connect the
telephone line cord.
Telephone jack
Telephone line cord
(not included)
Connect a
telephone
(optional).
If you have DSL high-speed
Internet service, a DSL filter
(not included) is required.
3
2
1
Feature setup
Set the clock
You must set the clock so that the system announces the correct day and time of
incoming messages. Make sure the year is correct because the day of the week
is calculated from the year. When you press , the system announces the CLOCK
current time (if set) and “ .” To exit at anytime while To set the clock, press CLOCK
setting the clock, press . /STOPPLAY
Press and the message window displays . The system announces the CLOCK
day and “ .To change the day, press or SKIP REPEAT To accept and continue,
press .”CLOCK
To change the day, press /REPEAT /SKIPMEMO or ANNOUNCE until the
correct day is announced.
Press . The correct day is savedCLOCK . The system announces the current hour
setting and “To change the hour, press SKIP or REPEAT. To accept and continue,
press CLOCK.”
To change the hour, press /REPEAT /SKIPMEMO or ANNOUNCE until the
correct hour is announced.
Press . The correct hour is saved. The system announces the current CLOCK
minute and “ .To change the minute, press or SKIP REPEAT To accept and
continue, press .” CLOCK
To change the minute, press /REPEAT /SKIP MEMO or ANNOUNCE until the
correct minute is announced.
Press . The correct minute is saved The system announces the current CLOCK .
year and “To change the year, press or . Press , when you SKIP REPEAT CLOCK
are done.”
To change the year, press /REPEAT /SKIP MEMO or ANNOUNCE until the
correct year is announced.
Press . The correct year is saved. The new day, time and year are CLOCK
announced.
To check the day and time, press .CLOCK
NOTE: In the event of a power failure, the clock needs to be reset. If the clock is not set, the system
announces, “ “ before message playback.Time and day not set,
Auto reset of answering system clock
If you subscribe to caller ID service, the day, month and time are set automatically
with each incoming call. The year must be set so that the day of the week can be
calculated from the caller ID information.
Record your announcement
An announcement is the greeting callers hear when calls are answered by the
answering system.
The telephone is preset with a greeting that answers calls with “Hello, please leave
a message after the tone.” You can use this default announcement, or replace it
with your own (up to three minutes long).
Press . The system announces, ANNOUNCE/SKIP “Announcement. Press
ANNOUNCE PLAYto record or press to play.”
Press again. The system announces, “ ANNOUNCE/SKIP Record after the tone.
Press STOP when you are done,“ followed by a long beep. Speak toward the
answering system, from about nine inches away. While recording, the message
window shows the recording time.
1.
2.
3.
4.
5.
6.
7.
8.
9.
1.
2.
2
Product specificaties
| Merk: | ATT |
| Categorie: | Antwoordapparaten |
| Model: | AT&T 1740 |
Heb je hulp nodig?
Als je hulp nodig hebt met ATT AT&T 1740 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Antwoordapparaten ATT
3 Oktober 2022
Handleiding Antwoordapparaten
Nieuwste handleidingen voor Antwoordapparaten
3 Oktober 2022