Atlona AT-VGW-HW Handleiding

Atlona Controller AT-VGW-HW

Lees hieronder de 📖 handleiding in het Nederlandse voor Atlona AT-VGW-HW (8 pagina's) in de categorie Controller. Deze handleiding was nuttig voor 63 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Installation Guide
AT-VGW-HW-3 and AT-VGW-HW-10
1
Velocity Gateway
AT-VGW-HW-3 and AT-VGW-HW-10
The Atlona AT-VGW-HW-3 and AT-VGW-HW-10 are Atlona Velocityâ„¢ System server gateways
for AV system control, plus room scheduling and AV asset management. These gateways feature
a compact enclosure that easily installs into a rack. With a simple network connection and web
browser access, an integrator, tech manager, or technician can quickly begin conguration and
deployment of AV control systems, room scheduling touch panels, and AV devices such as
matrix switchers. Velocity VGW-HW server gateways support industry-standard, secure data
communications, and feature dual Gigabit Ethernet ports for isolating an AV device LAN from
a facility or corporate network. An innovative, network-based system architecture allows full
redundancy and failover with two gateways in operation, maximizing AV system reliability while
preventing downtime in mission-critical applications.
1 x AT-VGW-HW-3 or
AT-VGW-HW-10
2 x Mounting plate
4 x Mounting screw
1 x Long rack ear
1 x Short rack ear
1 x Installation Guide
Package Contents
Installation Guide
AT-VGW-HW-3 and AT-VGW-HW-10
2
USBUSBUSB
ETHERNETHDMI OUTMDP OUT DC 19V
1 2
AT-VGW-250
GATEWAY
USB USB-C AUDIO OUT
T M
VELOCITY
1 USB
These ports are for future features and are
not usable at this time.
2 USB-C
This port is for future features and is not
usable at this time.
3 AUDIO OUT
Future feature port, not usable at this time.
4 MDP OUT
Connect to a DisplayPort monitor to view
device information, such as IP address.
5 HDMI OUT
Connect to an HDMI monitor or display
to view device information, such as IP
address.
6 ETHERNET
Connect an Ethernet cable from this port
to the same network as the controlled
devices.
7 DC 19V
Connect the included 19V power supply
to this port for power.
Panel Descriptions 1 2 3
4 5 6 7
Installation Guide
AT-VGW-HW-3 and AT-VGW-HW-10
3
Mounting Instructions
The AT-VGW-HW can be mounted in dierent ways, based on the number of units that are being
installed. The AT-VGW-HW may also be mounted in a rack or on/under any at surface.
Single-unit rack installation
1 Attach the included small rack ear to one side of the AT-VGW-HW, using the included
screws.
2 Attach the included longer rack ear to the opposite side of the AT-VGW-HW using the
included screws.
USB
USB
USB
USB USB-C AUDIO O UT
TM
V
ELOCITY
Dual-unit rack installation
1 Turn both units upside-down on a at surface, next to each other, as shown.
2 Position the included mounting plate over the pre-drilled holes on the bottom of the
enclosure. When attaching the mounting plate, the countersink bevels on the mounting
plate should face upward.
USB
USB-C AUDIO OUT
USB
USB
USB
USB USB-C AUDIO OUT
TM
V
ELOCIT Y
Countersink bevel


Product specificaties

Merk: Atlona
Categorie: Controller
Model: AT-VGW-HW

Heb je hulp nodig?

Als je hulp nodig hebt met Atlona AT-VGW-HW stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Controller Atlona

Handleiding Controller

Nieuwste handleidingen voor Controller