Atlona AT-RON-448 Handleiding

Atlona Receiver AT-RON-448

Lees hieronder de 📖 handleiding in het Nederlandse voor Atlona AT-RON-448 (8 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

Installation Guide

AT-RON-448

4K HDR Eight-Output HDMI Distribution Amplier

AT-RON-448

The Atlona Rondo™ series are HDMI distribution ampliers for high dynamic range (HDR)

formats. They are HDCP 2.2 compliant and support 4K/UHD video @ 60 Hz with 4:4:4 chroma

sampling, as well as HDMI data rates up to 18 Gbps. The Rondo series are ideal for applications

requiring the latest as well as emerging 4K/UHD and HDR sources and displays. They are

compatible with all video resolutions, audio formats, and color space formats supported in the

HDMI 2.0a specication, plus the ability to pass metadata for HDR content. The Rondo Series

HDMI distribution ampliers include EDID management features, front panel LED indicators

for power and signal status, and the capability to cascade several units without compromising

performance.

Package Contents

1 x AT-RON-448

1 x 5 V DC power supply

1 x Captive screw connector, 5-pin

2 x Rack ears

4 x Rubber feet

4 x Screws

1 x Installation guide

IMPORTANT: Visit http://www.atlona.com/product/AT-RON-448 for the latest rmware

updates.

Installation Guide

AT-RON-448

AT -RON-448 EDID

INT LEARN

1 2 3 4 5 6 7 8

SYNCPOWER

OUT PUT

1234

DC 5V

BACKUP

DC 5V

MAINANALOG S/PDIF

HDMI IN

AT-RO N-448

L R

5678

1 POWER

This M LED indicator will glow solid

red when the power supply is MAIN

connected. The LED indicator will glow B

solid red when a backup power supply

is connected to the BACKUP power

receptacle.

2 SYNC

This LED indicator will glow solid blue

when an active source is detected on the

HDMI IN port.

3 Output Indicators

These LED indicator will glow solid blue

when a display or other sink device is

connected to the ports.HDMI OUT

4 INT

This LED indicator glows solid blue when

the unit is using the built-in EDID.

5 LEARN

This LED indicator glows solid blue when

the unit is in “EDID learn” mode.

6 EDID button

Press this button to switch between

“internal” and “learn” modes.

7 FW

Connect a mini USB cable to this port to

update the rmware.

8 HDMI IN

Connect an HDMI cable from this port to a

UHD/HD source.

9 ANALOG

Connect the included 5-pin captive screw

connector to this port to de-embed the

input audio to an analog output device.

10 SPDIF

Connect an RCA-type cable from this port

to de-embed the input audio to a digital

output device.

11 HDMI OUT 1 - 8

Connect an HDMI cable from each of

these ports to a display or other sink

device.

12 DC 5V

Two power receptacles are provided:

BACKUP and MAIN. If not using power

supply redundancy, connect the included

power supply to the power MAIN

receptacle. If using a backup power

supply (not included), then connect the

backup power supply from the BACKUP

power receptacle to an electrical outlet

that is on a dierent circuit than the main

power supply. Additional power supplies

can be purchased through Atlona.

31 2 4

87 910

Panel Descriptions

11 12

Installation Guide

AT-RON-448

1. Connect an HDMI cable from the UHD/HD source to the port on the AT-RON-448.HDMI IN

2. Connect up to eight display/sink devices to the ports on the rear panel of the HDMI OUT

AT-RON-448.

3. OPTIONAL: Connect the included 5-pin captive screw connector from the ANALOG port to

the input of an analog output device. Refer to the wiring instructions in the diagram above.

4. OPTIONAL: Connect an RCA-type cable from the SPDIF connector to the digital input of

output device.

5. Connect the included power supply to the power receptacle.DC 5V

Installation

Analog Audio De-Embedding

The AT-RON-448 provides the ability to de-embed two-channel balanced or unbalanced analog

audio on the ANALOG port, using the included 5-pin captive screw connector. This step is

optional.

Use wire strippers to remove enough insulation to allow each wire to be securely fastened to

each terminal of the captive screw connector block and connect the wires as shown.

GND

Side View Side View

GND

NOTE: If not using power supply redundancy, connect the included power

supply to the power receptacle. If using a backup power supply (not MAIN

included), then connect the backup power supply from the BACKUP power

receptacle to an electrical outlet that is on a dierent circuit than the main power

supply. Additional power supplies can be purchased through Atlona.

1 2

GND GND

Balanced

Unbalanced

Product specificaties

Merk:	Atlona
Categorie:	Receiver
Model:	AT-RON-448
Kleur van het product:	Zwart
Gewicht:	2780 g
Breedte:	433.8 mm
Diepte:	255 mm
Hoogte:	44 mm
LED-indicatoren:	Ja
Certificering:	CE, RoHS, FCC
HDCP:	Ja
Maximale videoresolutie:	4096 x 2160 Pixels
HDMI versie:	2.0
Duurzaamheidscertificaten:	RoHS
Ingangsspanning:	100 - 240 V
Temperatuur bij opslag:	-20 - 60 °C
HDMI in:	1
Bandbreedte:	- MHz
Aantal HDMI-uitgangen:	8
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	6.75 W
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 90 procent