ART ProSplit Handleiding

ART Splitter ProSplit

Lees hieronder de 📖 handleiding in het Nederlandse voor ART ProSplit (12 pagina's) in de categorie Splitter. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
Artcessories
User's Manual
IMPORTANT SAFETY INSTRUCTION – READ FIRST
This symbol, whenever it appears,
alerts you to the presence of
uninsulated dangerous voltage
inside enclosure-voltage that may be
sufficient to constitute risk of shock.
This symbol, whenever it appears,
alerts you to important operating
and maintenance instructions in
the accompanying literature.
Please read the manual.
Read Instructions: Retain safety and operating instructions for
future reference. Heed all warnings printed here and on the
equipment. Follow the operating instructions printed in this user
guide.
Do not open: There are no user serviceable parts inside. Refer
any service work to qualified technical personnel only.
Grounding: Only connect the unit to equipment with properly
grounded mains power. Do not defeat the grounding and
polarization means of the power cord plug of the connected
equipment. Do not remove or tamper with the ground
connection on the power cord of the connected equipment.
Environment: Protect from excessive dirt, dust, heat, and
vibration when operating and storing. Avoid tobacco ash, drink
spillage and smoke, especially that associated with smoke
machines.
Handling: Protect the controls from damage during transit. Use
adequate padding if you need to ship the unit. To avoid injury to
yourself or damage to the equipment, take care when lifting,
moving or carrying the unit.
Servicing: Refer servicing to qualified technical personnel.
Installation: Install the unit in accordance with the instructions
printed in the user guide.
INTRODUCTION:
Thanks for purchasing Applied Research and
Technology’s PROsplit. The PROSplit provides one
direct output and one transformer isolated output from a
single microphone input.
Applications include sending the direct output to the
main or Front-of-House mixer, with the second isolated
output being sent to a monitor or recording mixer.
The direct output passes phantom power from the main
mixer to the microphone for use with condenser
microphones.
The PROSplit includes a ground-lift switch on the
isolated output to reduce noise due to ground loops
between connected equipment.
For versatility the PROSplit also features an attenuator
pad switch on the input that can be used to alternately
connect a preamplified (line-level) signal to the two
microphone-level PROsplit outputs.
INSTALLATION and OPERATION:
Connect a low impedance dynamic or condenser
microphone to the MICROPHONE INPUT on the
PROSPLIT (alternately connect a line level signal to the
MICROPHONE INPUT and engage the front panel
INPUT PAD switch.).
Connect the DIRECT MICROPHONE OUTPUT to the
mic input on main mixer (switch phantom power on at
mixer if desired).
Connect the TRANSFORMER ISOLATED
MICROPHONE OUTPUT to the mic input on secondary
mixer or recording system.
Set GROUND switch to LIFT or GND. Use whichever
setting provides lowest noise performance.
SPECIFICATIONS:
Frequency Response: 20Hz to 20kHz, ±0.25dB @
-15dBu -3dB@approx.165Hz
THD: <0.26% from 20Hz to 20kHz
–15dBu input
<0.1% from 45Hz to 20kHz,
–15dBu input
0.002% Typical @ 1kHz,
-15dBu Input
Phase Shift: <10 @ 20kHz (Ref, 1kHz)°
Input Impedance: >1.1k Ohms @ 1kHz
(Typical driving source
impedance is 150 Ohm)
Output Impedance: < 255 Ohms @ 1kHz
(Typical output load
impedance is 1k Ohm)
CMRR: >105dB @ 60Hz /
>80dB @ 3kHz
Voltage Insertion Loss: Approximately 2dB @ 1kHz
Maximum Input Level: -1.4dBu @ 20Hz/+3.5dBu
For 1% THD @ 30Hz / +9.4dBu @ 50Hz
Dimensions HxWxD(in): 1.85 x 4.6 x 3.5
HxWxD(mm): 47 x 117 x 89
Weight (lbs/kg): 0.9 / 0.4
NOTE: All measurements made from the TRANSFORMER
ISOLATED MICROPHONE OUTPUT with PAD SWITCH out
(off) and 150 Ohm balanced source feeding MICROPHONE
INPUT and 1k Ohm load connected to TRANSFORMER
ISOLATED MICROPHONE OUTPUT to simulate a typical "real
world" microphone and mic preamplifier. 0dBu = 0.775VRM
WARRANTY INFORMATION:
Limited Warranty (USA only)
Applied Research and Technology will provide warranty
and service for this unit in accordance with the following
warrants:
Applied Research and Technology, (ART) warrants to
the original purchaser that this product and the
components thereof will be free from defects in
workmanship and materials for a period of years three
from the date of purchase. Applied Research and
Technology will, without charge, repair or replace, at its
option, defective product or component parts upon
prepaid delivery to the factory service department or
authorized service center, accompanied by proof of
purchase date in the form of a valid sales receipt.
Exclusions
This warranty does not apply in the event of misuse or
abuse of the product or as a result of unauthorized
alterations or repairs. This warranty is void if the serial
number is altered, defaced, or removed.
ART reserves the right to make changes in design or
make additions to or improvements upon this product
without any obligation to install the same on products
previously manufactured.
ART shall not be liable for any consequential damages,
including without limitation damages resulting from loss
of use. Some states do not allow limitations of incidental
or consequential damages, so the above limitation or
exclusion may not apply to you. This warranty gives you
specific rights and you may have other rights, which
vary, from state to state. The warranty terms listed
above are only valid within the United States of America.
For units purchased outside the United States, an
authorized distributor of Applied Research and
Technology will provide service. For information on
warranty and service policies outside of the U.S., please
contact your local distributor.
Please fill in the following information for your reference:
Date of purchase: _________________________
Purchased from: _________________________
SERVICE:
The following information is provided in the unlikely
event that your unit requires service.
1. Be sure that the unit is the cause of the problem.
Check to make sure that the unit has power
supplied, that all cables are connected correctly,
and that the cables themselves are in working
condition. You may want to consult with your dealer
for assistance in troubleshooting or testing your
particular configuration.
2. If you believe that the ART unit is at fault, go to
www.artproaudio.com. Select " ", then Support
"Return Authorization Request" to request a return
authorization number.
3. If you are returning the unit for service, pack the
unit in its original carton or a reasonable substitute.
The original packaging may not be suitable as a
shipping carton, so consider putting the packaged
unit in another box for shipping. Print the RA
number clearly on the outside of the shipping box.
Print your return shipping address on the outside of
the box.
4. Include with your unit: a note with the RA number
and your contact information, including a return
shipping address (we cannot ship to a P.O. box)
and a daytime phone number, and a description of
the problem, preferably attached to the top of the
unit. Also include a copy of your purchase receipt.
www.artproaudio.com
E-mail: support@artproaudio.com
© 2014 Applied Research & Technology
PROSPLIT
PS-5004-101
V1.3


Product specificaties

Merk: ART
Categorie: Splitter
Model: ProSplit

Heb je hulp nodig?

Als je hulp nodig hebt met ART ProSplit stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Splitter ART

ART

ART TPatch Handleiding

13 November 2024
ART

ART ProSplit Handleiding

12 November 2024
ART

ART SPLITComPro Handleiding

12 November 2024

Handleiding Splitter

Nieuwste handleidingen voor Splitter