Apc RBC140 Handleiding

Apc UPS RBC140

Lees hieronder de šŸ“– handleiding in het Nederlandse voor Apc RBC140 (10 pagina's) in de categorie UPS. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
Installation Guide Smart-UPSā„¢On-Line
Replacement Battery Module
APCRBC140/APCRBC140J
Important Safety Instructions
SAVE THESE INSTRUCTIONS - This manual contains important instructions that should be followed during installation
and maintenance of the Smart-UPS and batteries.
Read these instructions carefully and look at the equipment to become familiar with the device before trying to install,
operate, service or maintain it. The following special messages may appear throughout this bulletin or on the equipment to
warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.
The addition of this symbol either to a ā€œDangerā€ or ā€œWarningā€ safety label indicates that an electrical hazard
exists which will result in personal injury if the instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury or death.
Product Handling Guidelines
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious
injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate
injury.
NOTICE
NOTICE is used to address practices not related to physical injury.
<18 kg
<40 lb
18-32 kg
40-70 lb
32-55 kg
70-120 lb
>55 kg
>120 lb
Smart-UPS On-Line APCRBC140/APCRBC140J
2
Safety and General Information
Inspect the package contents upon receipt. Notify the carrier and dealer if there is any damage.
ā€¢ Adhere to all local and national electrical codes.
ā€¢ This placement Battery Module C) is intended only for indoor use a controlled nvironment. Re (RB in e
ā€¢ Do not perate his in re sunlight in ontact i fluids, r here here s xcessive st r midit . o t RBC di ct , c w th o w t i e du o hu y
ā€¢ Be ure vents on the RBC are not blocked. Allow equate pace for oper ilation. s the air ad s pr vent
ā€¢ The ttery ypicall lasts or tw five years. nvironmenta factors mpact attery life. levated ambient ba t y f o to E l i b E
temperatures, poor quality mains r, and frequent hort duration discharges will shorten battery life. powe s
ā€¢ Replace batter immediately when the S dicates ttery replacement is necessary or when the batteries the y UP in ba
reach the end of their life. ailure to do so ould result in equipment damage nd/or injury. F c a
ā€¢ Always ecycle sed batteries. r u
For information on recycli used ttery modules, fer to the ttery Disposal Information sheet included ng ba re Ba
with the placement battery module. re
ā€¢ Recycl the ackag materials or ave them or euse.e p e s f r
ā€¢ Additional safety information can be in Safety Guide supplied this . found the with unit
ā€¢ Do not lay tools or metal parts on top of batteries.
ā€¢ Do not dispose of battery or batteries in a . The tteries ay explode. fire ba m
ā€¢ Do not open or mutilate tteries. leased electrolyte is rmful to the kin and eyes, and may be xic. ba Re ha s to
ā€¢ Servicing of er eplaceable atteries should to be performed supervised by personne knowledgeable bout us r b or l a
batteries nd required precautions. a
ā€¢ Before talling or replacing the batteries, remove jewelry such s twatches and rings. ins a wris
ā€¢ A tter ca present sk f lectric hoc and rns short-circui current. ba y n a ri o e s k bu by high t
ā€¢ Failed batteries a reac temperatures that xceed he thresholds or touchable urfaces c n h e t burn f s
Smart-UPS On-Line APCRBC140/APCRBC140J 3
Replace Battery Modules
Actual models may differ in appearance from those depicted in these graphics. Installation process is identical for all
models.
* Contact APC by Schneider Electric Customer Support to determine the age of the installed battery modules.
Note: The batteries will charge to 90% capacity in the first three hours of operation on utility power.
Do not expect full runtime capability during this initial charge period.
CAUTION
RISK OF DAMAGE TO EQUIPMENT OR PERSONNEL
ā€¢ The equipment is heavy. Each battery module weighs 17 kg (37 lb).
ā€¢ Always practice safe lifting techniques adequate for the weight of the equipment.
ā€¢ Adhere to all local and national electrical codes.
ā€¢ Use the battery model handle to slide the battery modules in and out of the UPS and external battery
pack (XLBP).
ā€¢ Do not use the handle to lift or carry the battery module.
Failure to follow these instructions could result in equipment damage and minor or moderate injury.
CAUTION
RISK OF HYDROGEN SULPHIDE GAS AND EXCESSIVE SMOKE
ā€¢ Replace the battery at least every 5 years or at the end of its service life, whichever is earlier.
ā€¢ Replace the battery immediately when the UPS indicates battery replacement is necessary.
ā€¢ Replace batteries with the same number and type of batteries as originally installed in the equipment.
ā€¢ Replace the battery immediately when the UPS indicates a battery overtemperature condition, or when
there is evidence of electrolyte leakage. Power off the UPS, unplug it from the AC input, and disconnect
the batteries.
ā€¢ Do not operate the UPS until the batteries have been replaced.
ā€¢ *Replace all battery modules (including the modules in External Battery Packs) which are older than one
year, when installing additional battery packs or replacing the battery module(s).
Failure to follow these instructions could result in equipment damage and minor or moderate injury.
UPS model RBC
SRT5KXLJ APCRBC140J
SURT14K/SURT18K
SRT5K/SRT6K APCRBC140
SRT8K/SRT10K
SURT15K/SURT20K


Product specificaties

Merk: Apc
Categorie: UPS
Model: RBC140
Gewicht: 34550 g
Breedte: 197 mm
Diepte: 597 mm
Hoogte: 122 mm
Gewicht verpakking: 37280 g
Breedte verpakking: 409 mm
Diepte verpakking: 781 mm
Hoogte verpakking: 226 mm
Accu/Batterij voltage: 192 V
Duurzaamheidscertificaten: RoHS
Batterij capaciteit: - VAh
Temperatuur bij opslag: -15 - 45 Ā°C
Luchtvochtigheid bij opslag: 0 - 95 procent
Aantal inbegrepen batterijen: 1 stuk(s)
Hoogte, in bedrijf: 0 - 3000 m
Hoogte bij opslag: 0 - 15000 m
Bedrijfstemperatuur (T-T): 0 - 40 Ā°C
Relatieve vochtigheid in bedrijf (V-V): 0 - 95 procent
Batterijtechnologie: Sealed Lead Acid (VRLA)
Code geharmoniseerd systeem (HS): 85044090

Heb je hulp nodig?

Als je hulp nodig hebt met Apc RBC140 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding UPS Apc

Handleiding UPS

Nieuwste handleidingen voor UPS