Apc BR1500G-BR Handleiding

Apc UPS BR1500G-BR

Lees hieronder de 📖 handleiding in het Nederlandse voor Apc BR1500G-BR (10 pagina's) in de categorie UPS. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/10

Installation and Operation Manual

Back-UPS® BR1500G-BR

Connect the battery

Inventory Safety

This unit is intended for indoor use only.

Do not operate this unit in direct sunlight, in

contact with fluids, or where there is

excessive dust or humidity.

Do not block the air vents on this unit.

1 2 3

4 5 Charge the battery for at least 16

hours before use.

bu001a

bu055a

bu057a

bu059a

bu058a

bu060a

Back-UPS BR1500G-BR Installation and Operation2

PowerChute® Personal Edition Software

Overview

PowerChute Personal Edition Software allows you to use your computer to access additional power protection and

management features of the Back-UPS.

Using PowerChute, you can:

• Preserve work in progress during a power outage by putting your computer into Hibernate mode. When the

power returns, the computer will appear exactly as it did before the power outage.

• Configure the Back-UPS management features, such as power-saving outlets, shutdown parameters, audible

alarms, and more.

• Monitor and view the status of the Back-UPS, including the estimated runtime, power consumption, power

event history, and more.

Available features will vary by Back-UPS model and operating system.

If you choose not to install PowerChute, the Back-UPS will still provide backup power and power protection to

connected equipment. However, you will only be able to configure a limited number of features using the display

interface.

Compatibility

PowerChute is compatible with Windows operating systems only. For a detailed list of supported operating systems,

go to www.apc.com, select Software & Firmware.

For Mac operating systems, we recommend using the native shutdown application (within System Preferences)

which recognizes your battery backup and allows you to configure shutdown of your system during power outages.

To access this application, connect a USB cable from the Back-UPS DATA PORT (POWERCHUTE PORT) to a USB port

on your computer, and see the documentation provided with your computer.

Installation

Connect the Back-UPS to a computer using a USB cable. Plug one end into the on the rear panel P C OWER HUTE PORT

of the Back-UPS and the other into a USB port on your computer.

Insert the PowerChute CD into your computer and follow the on-screen instructions. If your

Back-UPS did not come with a PowerChute CD, download the software from www.apc.com, select Software &

Firmware.

Back-UPS BR1500G-BR Installation and Operation 3

Connect the equipment

Battery Backup and Surge Protected outlets

When the Back-UPS is receiving input power, the

Surge Protection only outlets and the Battery Backup

with Surge Protection outlets will supply power to

connected equipment. During a power outage or other

utility problems, only the Battery Backup outlets

receive power for a limited time from the Back-UPS.

Connect equipment such as printers, FAX machines,

scanners, or other peripherals that do not need battery

backup power to the Surge Protection Only outlets.

These outlets provide full time protection from surges

even if the Back-UPS is switched off.

Master and Controlled outlets

To conserve electricity, when the device connected to

the Master outlet goes into Sleep or Standby mode, or

turns off, the Controlled by Master device(s) will shut

down as well, saving electricity.

Connect a master device, such as a desktop computer

or audio/visual receiver to the Master outlet. Connect

peripheral devices such as a printer, speakers, or a

scanner to the Controlled by Master outlets.

1USB and Serial Data port

PowerChute port

To use PowerChute Personal Edition, connect the supplied USB software cable or serial cable

(not supplied).

2Ground screw Connect the ground wire from another surge suppression device such as a network or data line

surge protector to the ground screw on the Back-UPS.

3Building Wiring Fault LED When the LED illuminates, a building wiring fault has occurred. Contact a qualified electrician to

correct the fault.

4Surge Protection outlets,

Controlled by Master outlets

These outlets provide surge protection during a power outage. These outlets will disconnect from

AC power during a power outage, or in the event that the Master outlet goes into Sleep mode.

5Surge Protection outlets These outlets provide full-time surge protection, when the unit is turned on or off. Connect a

printer, scanner or other devices that do not require battery backup protection.

6AC Power Cable Connect the Back-UPS to utility power.

7Battery Backup outlets with

Surge Protection

During a power outage or other utility problems, these outlets provide power from the

Back-UPS battery. Connect critical equipment such as desktop computer, computer monitor,

modem or other data sensitive devices to these outlets.

8Battery Backup, Controlled by

Master outlet with Surge

Protection

During a power outage or other utility problems, these outlets provide power from the

Back-UPS battery.

These outlets will disconnect from AC power during a power outage, or in the event that the

Master outlet goes into Sleep mode.

Connect critical equipment such as desktop computer, computer monitor, modem or other data

sensitive devices to these outlets.

9Master outlet Connect the master device to this outlet, in most scenarios, this will be the main computer.

:Gigabit Ethernet

surge-protected ports

Use an Ethernet cable to connect a modem to the IN port, and a computer to the OUT port.

;External Battery Pack connector Connect an external battery pack to provide additional battery backup runtime.

<Coaxial ports with

Surge Protection

Connect a modem or other devices with coaxial connectors to the coaxial ports.

bu220a

Battery

Backup

Surge

Only

Circuit Breaker

Push to Reset

BR1500G-BR

PowerChute

Port

USB & Serial

Cable In

Cable out

Product specificaties

Merk:	Apc
Categorie:	UPS
Model:	BR1500G-BR
Kleur van het product:	Zwart
Gewicht:	13000 g
Breedte:	112 mm
Diepte:	382 mm
Hoogte:	301 mm
Snoerlengte:	1.83 m
Geluidsniveau:	45 dB
Gewicht verpakking:	13800 g
LED-indicatoren:	Ja
Vormfactor:	Tower
Afmetingen verpakking (BxDxH):	235 x 490 x 390 mm
Aantal USB 2.0-poorten:	1
Aantal Ethernet LAN (RJ-45)-poorten:	1
Geluidsalarm(en):	Ja
Duurzaamheidscertificaten:	RoHS
Uitgangsvermogen:	865 W
Temperatuur bij opslag:	-5 - 45 °C
Stroomspanning bescherming:	Overbelasting
Frequentie:	50/60 Hz
Luchtvochtigheid bij opslag:	0 - 95 procent
Netwerkfuncties:	Gigabit Ethernet
Hoogte, in bedrijf:	0 - 3000 m
Hoogte bij opslag:	0 - 15000 m
Overbelastingsprotectie:	Ja
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 95 procent
Batterijtechnologie:	Sealed Lead Acid (VRLA)
Type beeldscherm:	LCD
Surge energy rating:	355 J
Aantal AC uitgangen:	8 AC-uitgang(en)
Nominale input voltage:	115 V
Input-connectietype:	NBR 14136
Output power capacity:	1.5 kVA
Ingang operation voltage (min):	- V
Ingang operation voltage (max):	- V
Uitgang operation voltage (min):	- V
Uitgang operation voltage (max):	- V
Typische backup tijd op halve lading:	- min
Typische backup tijd op volledige lading:	- min
Netspanning, in bedrijf:	115 V
Hoorbare alarmstanden:	Batterijvervanging
Spanningsbeveiliging:	Ja