Anthro eNook Pro Handleiding

Anthro Flat panel steun eNook Pro

Lees hieronder de 📖 handleiding in het Nederlandse voor Anthro eNook Pro (8 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

A S S E M B LY I N S T R U C T I O N S

Anthro Corporation® | 10450 SW Manhasset Dr. | Tualatin, OR 97062

Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: sales@anthro.com | anthro.com

Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409

eNook® Pro

Rev C, May 2009

Product Part#

eNook Pro for Laptops, 28w EPL2818zz/xx

eNook Pro for Laptops, 36w EPL3616zz/xx

eNook Pro for Monitors, 28w EPM2818zz/xx

eNook Pro for Monitors, 36w EPM3616zz/xx

WELC O M E

Thank you for purchasing eNook® Pro! This installation is a two-person job.

If you have any questions or if we can help you in any way, please contact us at 800.325.3841.

NOTE: We provide do-it-yourself hardware and instructions for installation to wood studs and dry wall. Your

eNook can be mounted to other surfaces (like concrete and brick), and this work should be done by a qualiﬁed

contractor.

Product Quantity Part Number

01 Back Frame 1

36w, Monitor & Laptop Versions 225-2802-23

28w, Monitor & Laptop Versions 225-2815-23

02 Main Unit 1

36w, Monitor & Laptop Versions 835-5258-00

28w, Monitor & Laptop Versions 835-5259-00

03 1-5/8" Screw (Not Shown) 4 325-5086-00

04 1-1/2" Screw 4 325-5358-00

05 Workstation Screw 325-5092-00

Laptop Version 6

Monitor Version 4

06 Cable Clips 6 175-5217-00

07 Toggle Bolt Anchor 4 325-5394-00

08 5/32" Anthro Hex Driver

(not shown) 1 375-5000-00

09 Laptop Tray (Laptop Version)

36w 1 225-2811-00

28w (not shown) 1 225-2816-00

10 Cover Plate (36w Laptop Version) 2 225-2814-00

Product Quantity Part Number

11 Keyboard Mouse Keeper &

(Monitor Version) 1

36w 225-2823-00

28w 225-2803-23

12 Monitor Bracket (Monitor Version) 1

36w 225-2808-00

28w 225-2810-00

13 3/8" Phillips Screw 4 325-5150-00

14 Rubber Grommet (Monitor Version) 1 175-5237-00

15 VESA Plates Kit 1 825-3491-00

Contains:

75mm VESA Plate (1 ea)

100mm VESA Plate (1 ea)

M4 x .7 x 8mm Screws (4 ea)

M4 x .7 x 13.5mm Screws (2 ea)

Hex Keys (3 ea)

16 Monitor Tilt Pivot Mount 1 575-5035-00 &

(includes two Phillips mounting screws)

PARTS L IST

These instructions are for Anthro’s eNook® Pro. Before beginning assembly, please take a moment to review the

parts list below to verify that your shipment is complete.

ADDITIONAL COMPONENTS FOR MONITOR VERSION

eNook® Pro Assembly Instructions 3

STEP 1

Select the Mounting Location

¡ When choosing the right place to install your eNook, be sure to check the location of your power source. The power cord

on the optional medical-grade power strip (p/n 935PG) is 6 ft long.

¡ Your eNook can be mounted to drywall or to wood wall studs. If you’re installing to wood wall studs, go to Step 2.

¡ If you’re installing into drywall, go to Step 7.

STEP 2

Find Wall Studs

¡ Using a stud ﬁnder, locate the studs to which you'll attach your eNook.

STEP 4

Attach Screws to Wall Studs

¡ Using a 1/8" drill bit, drill one hole into a stud about

1-1/2" deep. How do you make sure that hole is

1-1/2" deep? Measure that length on your drill

bit and mark it with a piece of masking tape. Stop

drilling when you reach the masking tape.

¡ Using a Phillips driver (or a power driver with a

Phillips bit), attach the ﬁrst 1-1/2" long screw at that

mounting point, but don’t tighten all the way to the

wall. Stop tightening when the screw head is about

1/4" away from wall.

Drill

Wall Stud Prole

1½" Tape ¼"

Screw

STEP 3

Determine Mounting Point

¡ Determine the optimal desk height for your eNook.

Typical sitting height is about 29" high; typical

standing height is about 42" high.

¡ For the 36w eNook Pro, measure up 14-3/4" from the

shelf location and mark that point on one stud. For

the 28w eNook Pro, measure up 14-1/4" from the

shelf location and mark that point on one stud.

14.75"

23"

36w version shown

1-1/2" Screw

325-5358-00

Product specificaties

Merk:	Anthro
Categorie:	Flat panel steun
Model:	eNook Pro
Kleur van het product:	Zilver
Breedte:	36 "
Hoogte:	25.5 "
Materiaal behuizing:	MDF, Metal
Kleur:	Ja
Type verpakking:	Doos
In hoogte verstelbaar:	Nee
Montage gereedschap:	Ja
Montagewijze:	Muur
Maximale gewichtscapaciteit:	34 kg
Verstelbare plateaus:	Ja
Telescopisch:	Nee
Op afstand bedienbaar:	Nee
Verbeterd kabelbeheer:	Ja
Afstandsbediening inbegrepen:	Nee
Diepte (imperiaal):	22 "
AC-ingangsspanning:	120 V
AC-ingangsfrequentie:	60 Hz
Maximale schermgrootte:	- "
Minimale schermgrootte:	- "
Inbegrepen aantal schappen:	1