Anthem P2 Handleiding

Anthem Receiver P2

Lees hieronder de 📖 handleiding in het Nederlandse voor Anthem P2 (10 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/10

STATEMENT P2/P5

O P E R AT I N G M A N U A L

w w w . a n t h e m A V . c o m

™

SAFETY PRECAUTIONS

READ THIS SECTION CAREFULLY BEFORE PROCEEDING!

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE

AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS PRODUCT.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE THE FUSE ONLY WITH THE SAME AMPERAGE

AND VOLTAGE TYPE. REFER REPLACEMENT TO QUALIFIED SERVICE PERSONNEL.

WARNING: UNIT MAY BECOME HOT. ALWAYS PROVIDE ADEQUATE VENTILATION TO ALLOW FOR COOLING. DO NOT

PLACE NEAR A HEAT SOURCE, OR IN SPACES THAT CAN RESTRICT VENTILATION.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

1. Read Instructions – All the safety and operating instructions should be read before the product is operated.

2. Retain Instructions – The safety and operating instructions should be retained for future reference.

3. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.

4. Follow Instructions – All operating and use instructions should be followed.

5. Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use

a damp, soft cloth for cleaning.

6. Water and Moisture – Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub; in a wet basement; or near a swimming pool; and the like.

7. Accessories – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall,

causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket,

or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow

manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

The lightning flash with arrowpoint within an equilateral triangle

warns of the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle warns users

of the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

8. Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the

product and to protect it from overheating, and these openings must not be blocked or covered. The openings should

never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed

in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s

instructions have been adhered to.

9. Power Sources – This product should be operated only from the type of power source indicated on the marking label.

If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For

products intended to operate from battery power, or other sources, refer to the operating instructions.

10. Grounding and Polarization – This product may be equipped with a polarized alternating-current line plug (a plug having

one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are

unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

11. Power-cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the

point where they exit from the product.

12. Outdoor Antenna Grounding – If an outside antenna or cable system is connected to the product, be sure the antenna

or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article

810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to the proper grounding of the mast

and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding conductors,

location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

13. Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and disconnect the antenna or cable systems. This will prevent

damage to the product due to lightning and power-line surges.

14. Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

15. Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in

a risk of fire or electric shock.

Antenna Lead-In Wire

Antenna-Discharge Unit 

(NEC Section 810-20)

Grounding Conductors 

(NEC Section 810-21)



Power Service Grounding

Electronic System

(NEC ART 250. Part H)

NEC-National Electrical Code

Electrical Service 

Equiptment

Ground Clamp

Ground Clamps



S2898A

Product specificaties

Merk:	Anthem
Categorie:	Receiver
Model:	P2
Kleur van het product:	Zwart
Gewicht:	34000 g
Breedte:	490 mm
Diepte:	572 mm
Hoogte:	238 mm
Aan/uitschakelaar:	Ja
Type aansluitplug:	3,5 mm
Connectiviteitstechnologie:	Bedraad
Bedoeld voor:	Thuis
Audio-uitgangskanalen:	- kanalen
Frequentiebereik:	20 - 20000 Hz
Signaal/ruis-verhouding:	125 dB
Crosstalk (1kHz):	140 dB
Totale harmonische vervorming (THD):	0.0007 procent
XLR in:	Ja
AC-ingangsspanning:	105 - 130 V
AC-ingangsfrequentie:	60 Hz
Stroomverbruik (typisch):	1800 W
Input sensitiviteit:	1000 mV
Piekvermogen per kanaal:	675 W
Synchronisatie ingangsimpedantie:	22 Ohm
Speakers connectiviteit type:	XLR / RCA
Dempingsfactor:	600
Line inputs (RCA):	2