Angler RC-16-T Handleiding
Angler
Remote trigger
RC-16-T
Lees hieronder de 📖 handleiding in het Nederlandse voor Angler RC-16-T (14 pagina's) in de categorie Remote trigger. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/14
INS ONTRUCTI S
remote control
transmitter
RC-16-T
The Angler RC-16 wireless system allows
you to control all compatible monolights
and strobes from one convenient location
with a reliable, easy-to-use controller.
The RC-16 is perfect to speed up and
simplify your workflow. Whether you shoot
with a single o-camera flash, or in a large
studio comprising several complex lighting
setups, you’ll immediately notice the
advantage of being able to adjust your
lighting without the need to maneuver into
crowded, hard-to-reach places.
You can adjust the power level of each flash
or group of flashes in 1/10th-stop
increments, as well as controlling modeling
lamps or AF-assist lamps, turning alert
sounds on or o, and test firing and
triggering your entire lighting setup, all
from a central location. The RC-16 also
employs 16 channels to prevent
interference and false triggers, along with
the ability to address 16 separate groups for
optimal control over your lighting.
You may even find that this convenience
makes you freer to experiment with new
ideas and styles. You’ll discover new ways to
use your lighting to bring out your very
best work.
Note: All flashes that you wish to control
from the RC-16-T Transmitter should be
equipped with an Angler RC-16-R
Receiver. Additional flashes can be
triggered via their optical slave function if
available.
Introduction
Before using this product, please read the
following safety instructions carefully in
order to ensure your safety and the proper
operation of the RC-16 system. Failure to
observe these precautions could result in
product malfunction, fire or explosion,
electric shock or other physical injury.
• Do not disassemble or modify. Should
the product break open due to
accidental damage, remove the
batteries and send it to an authorized
repair center.
• Keep dry. Do not handle with wet
hands, immerse in water, or expose to
rain or snow.
• Do not use in the presence of
flammable gases.
• Keep out of reach of children. This
product contains small parts that may
pose a choking hazard. Should a child
swallow any part of this product, consult
a physician immediately.
• Turn o the transmitter or receiver
immediately should a malfunction
occur. Should smoke or any unusual
smell come from this product, shut it o
and remove the batteries immediately.
Send it to an authorized repair facility
for service. Continued use may result in
physical injury.
• Do not expose to high temperature. Do
not leave product in a closed vehicle in
the sun or other areas subject to
extremely high temperature.
• Keep away from strong magnetic fields.
Strong static or magnetic fields
produced by devices such as cell phones
and radios may lead to malfunction.
Precautions
Product specificaties
| Merk: | Angler |
| Categorie: | Remote trigger |
| Model: | RC-16-T |
Heb je hulp nodig?
Als je hulp nodig hebt met Angler RC-16-T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Remote trigger Angler
10 December 2024
10 December 2024
Handleiding Remote trigger
- Remote trigger Sony
- Remote trigger Abus
- Remote trigger Fujifilm
- Remote trigger Godox
- Remote trigger Leica
- Remote trigger Nissin
- Remote trigger Quantum
- Remote trigger Somfy
- Remote trigger Yongnuo
- Remote trigger DSC
- Remote trigger Vello
- Remote trigger Phottix
- Remote trigger Profoto
- Remote trigger RadioPopper
- Remote trigger Impact
- Remote trigger Bolt
- Remote trigger Elinchrom
- Remote trigger Vimar
- Remote trigger Multiblitz
- Remote trigger Broncolor
- Remote trigger Cactus
- Remote trigger Westcott
- Remote trigger Hensel
Nieuwste handleidingen voor Remote trigger
1 December 2024
1 December 2024
1 December 2024
1 Oktober 2024
1 Oktober 2024
30 September 2024
30 September 2024
9 Juni 2024
9 Juni 2024
9 Juni 2024