AMX MXR-10010-SL Handleiding

AMX Niet gecategoriseerd MXR-10010-SL

Lees hieronder de 📖 handleiding in het Nederlandse voor AMX MXR-10010-SL (21 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/21

INS TA LLAT IO N & HA R D WARE RE F EREN CE MA NUA L

MODERO X® SERIES G5 RETRACTABLE TOU CH PANELS

M X R - 1 0 0 1 - B L

1 0 . 1 " M O D E R O X S E R I E S G 5 R E T R A C T A B L E T O U C H P A N E L ( B L A C K )

M X R - 1 0 0 1 - S L

1 0 . 1 " M O D E R O X S E R I E S G 5 R E T R A C T A B L E T O U C H P A N E L ( S I L V E R )

IMPORTANT SAFETY INSTRUCTIONS

mechanical, photocopying, recording, or otherwise, without the prior written permission of AMX. Copyright protection claimed extends to AMX hardware and software and

includes all forms and matters copyrightable material and information now allowed by statutory or judicial law or herein after granted, including without limitation, material

generated from the software programs which are displayed on the screen such as icons, screen display looks, etc. Reproduction or disassembly of embodied computer

programs or algorithms is expressly prohibited.

LIABILITY NOTICE

No patent liability is assumed with respect to the use of information contained herein. While every precaution has been taken in the preparation of this publication, AMX

assumes no responsibility for error or omissions. No liability is assumed for damages resulting from the use of the information contained herein. Further, this publication and

features described herein are subject to change without notice.

AMX WARRANTY AND RETURN POLICY

The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions.

8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding

type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit

into your outlet, consult an electrician for replacement of the obsolete outlet.

10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the

apparatus.

11. ONLY USE attachments/accessories specified by the manufacturer.

12. USE ONLY with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury from tip-over.

13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.

14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord

or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

15. DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.

16. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle.

17. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

18. DO NOT overload wall outlets or extension cords beyond their rated capacity as this can cause electric shock or fire.

19) THERE IS RISK OF PINCH DURING OPERATION. Keep hands and objects clear while panel is raising or lowering. If a finger, or any object, gets caught in

the moving mechanism pressing the button on the bezel one time will stop the movement. Pressing the button again will reverse the movement

allowing the object to be easily removed.

The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the product.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage"

within the product's enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.

ESD Warning: The icon to the left indicates text regarding potential danger associated with the discharge of static electricity from an outside source (such

as human hands) into an integrated circuit, often resulting in damage to the circuit.

WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture.

WARNING: No naked flame sources - such as lighted candles - should be placed on the product.

WARNING: Equipment shall be connected to a MAINS socket outlet with a protective earthing connection.

CAUTION: To reduce the risk of electric shock, grounding of the center pin of this plug must be maintained.

MXR-1001 - Installation & Hardware Reference Manual

ESD WARNING

WARNING: Avoid exposure to extreme heat or cold.

WARNING: This product is intended to be operated ONLY from the voltages listed on the back panel or the recommended, or

included, power supply of the product. Operation from other voltages other than those indicated may cause irreversible

damage to the product and void the products warranty. The use of AC Plug Adapters is cautioned because it can allow the

product to be plugged into voltages in which the product was not designed to operate. If the product is equipped with a

detachable power cord, use only the type provided with your product or by your local distributor and/or retailer. If you are

unsure of the correct operational voltage, please contact your local distributor and/or retailer.

FCC AND CANADA EMC COMPLIANCE INFORMATION:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Approved under the verification provision of FCC Part 15 as a Class B Digital Device.

Caution: Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this

device.

CAN ICES-3 (B)/NMB-3(B)

WIRELESS TRANSMITTER COMPLIANCE INFORMATION:

The term "IC:" before the radio certif ication number only signifies that Industry Canada technical specifications were met.

Le terme "IC:" avant le numéro de certification radio signifie seulement que les spécifications techniques d'Industrie Canada ont

été respectées.

This device complies with part 15 of the FCC Rules and the applicable Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device

must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation

est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit

accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment

should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not

be co-located or operating in conjunction with any other antenna or transmitter.

Cet appareil est conforme à FCC et IC l'exposition aux rayonnements limites fixées pour un environnement non contrôlé. Cet

appareil doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps. Cet transmetteur ne

doit pas être co-situé ou opérant en liaison avec toute autre antenne ou transmetteur.

To avoid ESD (Electrostatic Discharge) damage to sensitive components, make sure you are properly grounded before

touching any internal materials.

When working with any equipment manufactured with electronic devices, proper ESD grounding procedures must be

followed to make sure people, products, and tools are as free of static charges as possible. Grounding straps, conductive

smocks, and conductive work mats are specifically designed for this purpose.

Anyone performing field maintenance on AMX equipment should use an appropriate ESD field service kit complete with at

least a dissipative work mat with a ground cord and a UL listed adjustable wrist strap with another ground cord

WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this equipment are

hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified

service personnel.

Place the equipment near a main power supply outlet and make sure that you can

easily access the power breaker switch.

Product specificaties

Merk:	AMX
Categorie:	Niet gecategoriseerd
Model:	MXR-10010-SL
Kleur van het product:	Zilver
Gewicht:	8550 g
Breedte:	279.65 mm
Diepte:	171.53 mm
Hoogte:	389.25 mm
Beeldschermdiagonaal:	10.1 "
Resolutie:	1280 x 800 Pixels
RAM-capaciteit:	2048 MB
Ondersteund audioformaat:	AAC, MP2, MP3, WAV
Ethernet LAN:	Ja
Montagewijze:	In-bovenblad
Kijkhoek, horizontaal:	89 °
Kijkhoek, verticaal:	89 °
Helderheid:	400 cd/m²
Ingebouwde luidsprekers:	Ja
Beeldverhouding:	16:9
Ethernet LAN, data-overdrachtsnelheden:	10, 100 Mbit/s
Bekabelingstechnologie:	10/100Base-T(X)
Backlight type:	LED
Geluidsdrukniveau:	-42 dB
Temperatuur bij opslag:	5 - 85 °C
Luchtvochtigheid bij opslag:	-20 - 60 procent
RJ-45 ports hoeveelheid:	1
Touchscreen technologie:	Capacitief
Vermogen luidsprekers:	2 W
Contrastverhouding:	700:1
Stroomverbruik (typisch):	15.6 W
Bedrijfstemperatuur (T-T):	20 - 85 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 40 procent
Type beeldscherm:	TFT
Vermogenstoevoer locatie:	Extern