AMX CB-MSA-43 Handleiding

AMX Niet gecategoriseerd CB-MSA-43

Lees hieronder de 📖 handleiding in het Nederlandse voor AMX CB-MSA-43 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

QUICK START GUIDE

CB-MSA-43 Rough-In Box and Cover Plate for Modero S Series 4.3" Panel

Overview

The CB-MSA-43 Rough-In Box (FG2265-10) is an optional accessory for the Modero

S Series® 4.3” Wall Mount Touch Panel. It allows the panel to be mounted directly to

the studs/pre-wall.

The back of the Modero S Series 4.3” Wall Mount Touch Panel is contained within a

plastic outer housing or back box, and the back box attaches to the Rough-In Box.

The Rough-In Box kit includes a wall box and cover and mounting screws.

WARNING: In order to guarantee a stable installation of the touch panel, the

distance between the CB-MSA-43 and the outer wall surface must be a minimum

of .50 inches (1.27cm) and a maximum of .1.50 inches (3.81cm).

• Refer to the 95-2265-10 diagram for detailed installation dimensions.

Pre-Wall Installation of the CB-MSA-43 Rough-In Box

1. Remove the rough-in box cover (B in FIG. 1) before installation of the Rough-In

Box (A). Note: the cover MUST be removed before drywall installation. The cover

may be reinstalled after drywall installation using 4-40 screws (not included).

The mounting tabs on the front of the rough-in box (A) are intended to allow

additional anchoring of the rough-in box to its wall, but these can be removed if

necessary.

2. Fasten the CB-MSA-43 rough-in box to the stud through the holes on the Stud

Mounting tabs, using either nails or screws (not provided).

3. Remove the appropriate wiring knockouts from the rough-in box to

accommodate the cables being threaded through to the 7” Wall Mount Touch

Panel.

4. Thread the incoming Ethernet and USB wiring through the bottom knockout.

Leave enough slack in the wiring to accommodate installation of the touch

panel.

5. Install the drywall/sheetrock before inserting the back box for the CB-MSA-43.

6. Cut out the opening for the Wall Mount Touch Panel back box where the wall

has been placed over the Rough-In Box. Cutting out the surface slightly smaller

than what is outlined in the installation drawings, so that you can make any

necessary cutout adjustments, is very highly recommended.

NOTE: The front cover of the CB-MSA-43 (B in FIG. 1) should be installed after

the appropriate wiring is pulled to the Rough-In Box. The cover should then be

removed prior to the installation of the touch panel back box and discarded. Do

NOT discard the cover screws, as they are used to secure the Back Box.

7. Remove the matching knockouts on the touch panel’s Back Box. Install the

touch panel’s Back Box into the opening, allowing the stand-ups for the cover

screws to pass through the back of the Back Box. Secure the Back Box to the

Rough-In Box with the cover screws, pass the touch panel’s wiring through the

Back Box knockouts, and install the touch panel.

FIG. 1 CB-MSA-43 ROU GH-IN BOX - WITH FRONT COVER

4.64”

(11.78 cm)

4.61”

(11.70 cm)

2.79”

(7.08 cm)

Rough-In Box With Cover

Cover

Rough-In Box

Mounting Tabs

Stud Mounting Tabs

CB-MSA-43 (FG2265-10) SPECIF ICATIONS

Dimensions (HWD) • Rough-In Box: 4.64" x 4.61" x 2.37"

(11.78 cm x 11.70 cm x 5.60 cm)

• Rough-In Box Cover Plate: 2.79” x 4.61” x 0.47”

(7.08 cm x 11.70 cm x 1.19 mm)

Weight • With cover: 0.60 lbs (0.27 kg)

• Without cover: 0.40 lbs (0.18 kg)

Certifications • cTUVus Listed

• UL Listed

Included

Accessories:

• Cover Plate for Rough-in Box (62-2265-22)

• Cover Plate to Rough-In Box Mounting Screws (2)

(80-2265-01)

Recommended

Wall Cutout

for the CB-MSA-43

2.65”

(6.73 cm)

4.50”

(11.43 cm)

trademarks of HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of their

respective companies.

AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time.

The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153

AMX (UK) LTD, AMX by HARMAN - Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom • +44 1904-343-100 • www.amx.com/eu/

93-2265-10 REV: B

Last Revised: 11/05/2015

Cover

CB-MSA-43

Rough-In Box

Without Cover

CB-MSA-43

Rough-In Box

With Cover

(oblique angle)

Knock-out

Front

(oblique angle)

Cover screws

2.37”

(6.02 cm)

4.61”

(11.70 cm)

2.37”

(6.02 cm)

4.64”

(11.78 cm)

2.37”

(6.02 cm)

4.64”

(11.78 cm)

2.37”

(6.02 cm)

4.61”

(11.70 cm)

Front

Knock-out

Mounting Tabs

CB-MSA-43 Rough-In Box

Cover Installation

Screws

Product specificaties

Merk:	AMX
Categorie:	Niet gecategoriseerd
Model:	CB-MSA-43
Kleur van het product:	Beige
Montagewijze:	Muur
Maximale gewichtscapaciteit:	- kg
Paneelmontage-interface:	- mm
Compatibiliteit:	FG2265-03
Maximale schermgrootte:	4.3 "
Minimale schermgrootte:	- "