Ampeg SGT-DI Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Ampeg SGT-DI (21 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/21
Owner's Manual
2
TABLE OF CONTENTS
What’s in the Box � �� �� �� �� �� 3
Introduction� �� �� �� �� � � 3
Features � �� �� �� �� �� 3
Getting Started � �� �� �� �� � 3
Hookup Diagrams� �� �� �� � 4
Rear Panel � �� �� �� �� �� � 6
Top Panel � �� �� �� �� �� �7
Left and Right Panels � �� �� �� �� � 9
The Ampeg IR Loader Application � �� �� �� �10
SGT-DI Technical Specifications � �� �� �� �19
Block Diagram� �� �� �� �� � 20
Warranty and Support � �� �� �� �� �21
Suppliers Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifiers: Ampeg® SGT-DI™ Bass Preamp Pedal
Responsible Party - U.S. Contact Information:
Yamaha Guitar Group, Inc�
26580 Agoura Road
Calabasas, CA 91302-1921
(818) 575-3600
https://ampeg�com/
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules� Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation
© 2023 Yamaha Guitar Group, Inc. All rights reserved.
Ampeg, the Ampeg logo, Heritage, Portaflex, SGT, Super Grit Technology, SGT-DI, SVT, Line 6, Helix, HX, POD,
and Metallurgy are trademarks or registered trademarks of Yamaha Guitar Group, Inc� in the U�S� and/or other
jurisdictions� Mac and macOS are trademarks of Apple Inc�, registered in the U�S� and other countries and regions�
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries�
The Model and Serial numbers can be found on the product label� Please record these numbers below and retain this
document for your records�
Model Number: ________________________________
Serial Number: ________________________________
3
What’s in the Box
Ampeg® SGT-DI™, USB-C cable, 9V DC center negative 500mA power supply, adhesive rubber feet, Cheat
Sheet, and Quick Start Guide
Introduction
Designed with Ampeg’s industry standard tone and styling in mind, the SGT-DI offers classic Ampeg tone
in a simple, pedal-format preamp/DI unit� SGT-DI features an on-board Preamp, Compressor, EQ, SGT
(Super Grit Technology™) overdrive circuit, professionally captured speaker Cabs, and User IR support�
All of this is packed into a lightweight pedal that will fit in your gig bag or pedalboard to easily take
along to any practice, studio, or performanceThe SGT-DI can be used as your front-end tone device
for connecting to an external amplifier, mixer console, modeler, audio interface, or even headphones
making it an indispensable tool for the modern bassist� We like to call it All-In-One Bass Box!”The
Like all Ampeg products, your SGT-DI is designed by musicians and built using only the best of
components� Each pedal is tested to confirm that it meets our specifications, and we believe that each
SGT-DI pedal is the best that it can be�
In order to get the most out of your new SGT-DI, please fully read this Owners Manual, as well as the
Important Safety Instructions included with your SGT-DI device, before you begin playing�
Best of luck in all of your musical endeavors!
- And THANK YOU for choosing Ampeg!
Features
Studio quality Preamp/DI with classic Ampeg amp and cab tones in compact pedal format
Expertly captured Ampeg factory full-resolution speaker cabinet IRs, plus support for user IRs
Ampeg IR Loader application for Mac & Windows® computers for Cab and IR management and
potential firmware updates (app is available as a free download)
Support for Line 6® Marketplace premium IRs�
Footswitchable SGT (Super Grit Technology) circuit for B15/SVT® tube emulated drive
Built in Compressor, 3-Band EQ, and Ultra Lo/Ultra Hi EQ switching
Instrument and individual mono & stereo Aux inputs
Preamp, Thru, Headphones, and XLR Direct outputs
USB connectivity for Ampeg IR Loader app
Getting Started
Read and understand the included Important Safety Instructions
Make all initial connections with the power switches OFF on all equipment� Make sure the Volume
and Level controls are set to minimum�
Connect the included power supply
Connect an instrument to the Input jack with a 1/4" (shielded) instrument cable
While playing the instrument, adjust the Volume and Level knobs to the preferred setting�
Adjust the EQ knobs and switches to taste


Product specificaties

Merk: Ampeg
Categorie: Niet gecategoriseerd
Model: SGT-DI

Heb je hulp nodig?

Als je hulp nodig hebt met Ampeg SGT-DI stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Ampeg

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

V-Tac

V-Tac VT-44104 Handleiding

5 November 2024
MSW

MSW -HRH-600 Handleiding

5 November 2024
MSW

MSW -PCJ-302 Handleiding

5 November 2024
MSW

MSW -ETT-22 Handleiding

5 November 2024
DoorBird

DoorBird MTM56A Handleiding

5 November 2024
Hacienda

Hacienda PWB801 Handleiding

5 November 2024
Hacienda

Hacienda PWB802 Handleiding

5 November 2024
MSW

MSW -ECF1-01 Handleiding

5 November 2024
MSW

MSW -MWC-01 Handleiding

5 November 2024