American DJ Pinspot LED Handleiding
American DJ
Effect machine
Pinspot LED
Lees hieronder de 📖 handleiding in het Nederlandse voor American DJ Pinspot LED (2 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
Pinspot LED SPECIFICATIONS:
LED: 3W
Working Position: Any safe working position
Power Input Voltage: 100~240V AC 50/60Hz
Weight: 1lbs./ .5Kgs.
Dimensions: 5.75”(L) x 3”(W) x 2.4”(H)
145 x 75 x 61mm
Warranty: 3 Year (1095 days)
Pinspot LED
Unpacking: Thank you for purchasing the Pinspot LED by American DJ®. Every Pinspot LED has
been thoroughly tested and has been shipped in perfect operating condition. Carefully check the ship-
ping carton for damage that may have occurred during shipping. If the carton appears to be damaged,
carefully inspect your xture for any damage and be sure all accessories necessary to operate the unit
has arrived intact. In the case damage has been found or parts are missing, please contact our toll free
customer support number for further instructions. Do not return this unit to your dealer without rst
contacting customer support.
Introduction: The Pinspot LED is part of American DJ’s continuing pursuit for creating high qual-
ity affordable xtures. The Pinspot LED is a simple, small LED Pin Spot. This pin spot is light weight
and compact which makes it a great piece for mobile DJ’s, archtectural lighting, or ligting effect. The
Pinspot LED is also suitable for theaters, studios, retail stores, and other similar locations.
Lens Change: The Pinspot LED comes with a standard 12 degree lens already attached. Included in
the box is an optional 6 degree lens. To switch lenses simply remove the retainer ring in front of the
current lens, carefully remove the lens, and attach the 6 degree lens. Replace the retainer ring and the
switch is complete.
Installation: The unit should be mounted using a mounting clamp (not provided), afxing it to the
mounting bracket that is provided with the unit. Always ensure that the unit is rmly xed to avoid
vibration and slipping while operating. Always ensure that the structure to which you are attaching the
unit is secure and is able to support a weight of 10 times the unit’s weight. Also, always use a safety
cable that can hold 12 times the weight of the unit when installing the xture.
The equipment must be installed by a professional, and it must be installed in a place where it is out
of the reach of people’s grasp.
4000358
Caution!
No user serviceable parts inside do not attempt repairs. In the event your Pinspot
LED should fail, contact AmericanDJ®.
Customer Support: American DJ provides a toll free customer support line, to provide set up help and to ®
answer any question should you encounter problems during your set up or initial operation. You may also visit
us on the web at www.americandj.com for any comments or suggestions. Service Hours are Monday through
Friday 9:00 a.m. to 5:00 p.m. Pacic Standard Time.
Voice: (800) 322-6337 Fax: (323) 582-2941 E-mail: support@americandj.com
The Please Pinspot LED carries a 3 year (1095 day) limited warranty. fill out the enclosed warranty card
to validate your purchase. All returned service items whether under warranty or not, must be freight
pre-paid and accompany a return authorization (R.A.) umber. If the is under warranty you n remote
must provide a copy of your proof of purchase invoice. Please contact American DJ® customer sup-
port for a R.A. number.
MANUFACTURER’S LIMITED WARRANTY
A. American DJ, Inc. hereby warrants, to the original purchaser, American DJ and American Audio products to be free of manufacturing defects in
material and workmanship for a prescribed period from the date of purchase (see specic warranty period on reverse). This warranty shall be valid only if
the product is purchased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and
place of purchase by acceptable evidence, at the time service is sought.
B. For warranty service you must obtain a Return Authorization number (RA#) before sending back the product. Contact American DJ, Inc. Service
Department at 800-322-6337. Send the product only to the American DJ, Inc. factory. All shipping charges must be pre-paid. If the requested repairs or
service (including parts replacement) are within the terms of this warranty, American DJ, Inc. will pay return shipping charges only to a designated point
within the United States. If the entire instrument is sent, it must be shipped in it’s original package. No accessories should be shipped with the product. If
any accessories are shipped with the product, American DJ, Inc. shall have no liability whatsoever for loss of or damage to any such accessories, nor for the
safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product is modied in any manner which American DJ, Inc. con-
cludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the American DJ, Inc. factory
unless prior written authorization was issued to purchaser by American DJ, Inc.; if the product is damaged because not properly maintained as set forth in
the instruction manual.
D. This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check-up. During the period specied above,
American DJ, Inc. will replace defective parts at its expense with new or refurbished parts, and will absorb all expenses for warranty service and repair labor
by reason of defects in material or workmanship. The sole responsibility of American DJ, Inc. under this warranty shall be limited to the repair of the prod-
uct, or replacement thereof, including parts, at the sole discretion of American DJ. All products covered by this warranty were manufactured after January
1, 1990, and bear identifying marks to that effect.
E. American DJ, Inc. reserves the right to make changes in design and/or improvements upon its products without any obligation to include these
changes in any products theretofore manufactured. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied
with products described above. Except to the extent prohibited by applicable law, all implied warranties made by American DJ, Inc. in connection with
this product, including warranties of merchantability or tness, are limited in duration to the warranty period set forth above. And no warranties, whether
expressed or implied, including warranties of merchantability or tness, shall apply to this product after said period has expired. The consumer’s and/or
Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall American DJ, Inc. be liable for
any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product.
This warranty is the only written warranty applicable to American DJ and American Audio Products and supersedes all prior warranties and written descrip-
tions of warranty terms and
conditions heretofore published.
MANUFACTURER’S LIMITED WARRANTY PERIODS:
• All American Audio Products = 1-year (365 day) Limited Warranty (except V-Plus Series Ampliers)
• All American Audio V-Plus Series Ampliers = 3-year (1095 day) Limited Warranty
• American DJ Lighting and American DJ Branded Products = 1-year (365 day) Limited Warranty (Such as: Special Effect Lighting, Intelligent Lighting, UV
lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands etc. excluding Laser Products, lamps, and Star Tec
Series)
• American DJ Laser Products and Star Tec Products = 90-Day Limited Warranty
• American DJ L.E.D. Products = 3-year (1095 day) Limited Warranty (excluding motors which have a 1-year (365 day Limited Warranty)
Product specificaties
Merk: | American DJ |
Categorie: | Effect machine |
Model: | Pinspot LED |
Heb je hulp nodig?
Als je hulp nodig hebt met American DJ Pinspot LED stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Effect machine American DJ
15 November 2024
3 Juli 2024
12 Mei 2023
9 Mei 2023
9 Mei 2023
7 Mei 2023
4 Mei 2023
27 April 2023
22 April 2023
19 April 2023
Handleiding Effect machine
- Effect machine BeamZ
- Effect machine Behringer
- Effect machine HQ
- Effect machine HQ Power
- Effect machine Konig
- Effect machine Manta
- Effect machine Martin
- Effect machine Max
- Effect machine Midas
- Effect machine Monacor
- Effect machine Nedis
- Effect machine Pyle
- Effect machine Showtec
- Effect machine Velleman
- Effect machine Viking
- Effect machine Westinghouse
- Effect machine JB Systems
- Effect machine Monoprice
- Effect machine NGS
- Effect machine Steren
- Effect machine Eurolite
- Effect machine Antari
- Effect machine Chauvet
- Effect machine QTX
- Effect machine Valcom
- Effect machine Karma
- Effect machine Adj
- Effect machine Elation
- Effect machine Valueline
- Effect machine Fredenstein
- Effect machine TC Electronic
- Effect machine Elysia
- Effect machine Stairville
- Effect machine Black Lion Audio
- Effect machine Laserworld
- Effect machine TCM FX
- Effect machine Drawmer
- Effect machine ColorKey
- Effect machine Evo-Lite
- Effect machine Blizzard
- Effect machine Hazebase
- Effect machine IGS Audio
- Effect machine Cameo
- Effect machine Sagitter
- Effect machine DJPower
- Effect machine Doepfer
- Effect machine Fun Generation
- Effect machine Lotronic
- Effect machine IMG Stage Line
- Effect machine Lexicon
- Effect machine Futurelight
- Effect machine The Confetti Maker
- Effect machine Eliminator Lighting
- Effect machine BoomTone DJ
- Effect machine Klark Teknik
- Effect machine Lab Gruppen
- Effect machine Audibax
- Effect machine Magmatic
- Effect machine Technical Pro
- Effect machine Rosco
- Effect machine Showven
Nieuwste handleidingen voor Effect machine
20 November 2024
19 November 2024
16 November 2024
7 November 2024
7 November 2024
7 November 2024
7 November 2024
7 November 2024
7 November 2024
7 November 2024