American DJ Ikon IR Handleiding
American DJ
Effect machine
Ikon IR
Lees hieronder de 📖 handleiding in het Nederlandse voor American DJ Ikon IR (6 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
User Instructions
Rev. 5/16
Ikon IR
©2015 ADJ Products, LLC all rights reserved. Information,
specications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all aliated companies hereby dis-
claim any and all liabilities for property, equipment, building,
and electrical damages, injuries to any persons, and direct or
indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a
result of the improper, unsafe, unsucient and negligent as-
sembly, installation, rigging, and operation of this product.
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn o all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!
ADJ Products, LLC - www.adj.com - Ikon IR User Manual Page 3
Ikon IR Precautions
Safety Issue: This unit may blow the fuse if the maximum allotted
load of 7 amps is reached. If the fuse needs replacement, please see
fuse replacement on page 6.
• Be sure the local power outlet match the required voltage of the
unit.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user
serviceable parts inside.
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
• To reduce the risk of electrical shock or re, do not expose this unit
rain or moisture
• This unit is intended for indoor use only, use of this product out-
doors voids all warranties.
• During long periods of non-use, disconnect the unit’s main power.
• Always mount this unit in safe and stable matter.
• Power-Cord Protection - Power-supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where they exit from
the fixture. Do not attempt to remove or break o the ground prong
from the electrical cord. This prong is used to reduce the risk of
electrical shock and re in case of an internal short.
• The fixture should be serviced by qualified service personnel when:
A. The power cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The fixture does not appear to operate normally or exhibits a
marked change in performance.
Ikon IR Warranty Registration
The kon IR two year (730 days) limited warranty. Please I carries a
fill out the enclosed warranty card to validate your purchase. All
returned service items whether under warranty or not, must be freight
pre-paid and accompany a return authorization (R.A.) umber. If the n
unit is under warranty you must provide a copy of your proof of pur-
chase invoice. Please contact ADJ customer support for a R.A. num-
ber.
Ikon IR Introduction
ADJ Products, LLC - www.adj.com - Ikon IR User Manual Page 2
To optimize the performance of this product, please read these operating
instructions carefully to familiarize yourself with the basic operations of
this unit. These instructions contain important safety information regard-
ing the use and maintenance of this unit. Please keep this manual with the
unit, for future reference.
Unpacking:
Thank you for purchasing the Ikon IR by ADJ Products, LLC. Every Ikon
IR has been thoroughly tested and has been shipped in perfect operating
condition. Carefully check the shipping carton for damage that may have
occurred during shipping. If the carton appears to be damaged, carefully
inspect your unit for any damage and be sure all equipment necessary
to operate the system has arrived intact. In the event damage has been
found or parts are missing, please contact our toll free customer sup-
port number for further instructions. Please do not return the unit to your
dealer without rst contacting customer support.
Customer Support:
ADJ Products, LLC provides a toll free customer support line, to provide
set up help and to answer any question should you encounter problems
during your set up or initial operation. You may also visit us on the web at
www.adj.com for any comments or suggestions. For service related issue
please contact ADJ Products, LLC. Service Hours are Monday through
Friday 8:00 a.m. to 4:30 p.m. Pacic Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2941
E-mail: support@americandj.com
Warning! To prevent or reduce the risk of electrical shock or re, do not
expose this unit to rain or moisture.
Caution! This may cause eye damage. Avoid looking directly into the light
source. Use sensible precaution.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
ADJ Products, LLC.
PLEASE do not discard the shipping carton in the trash. Please recy-
cle when ever possible.
ADJ Products, LLC - www.adj.com - Ikon IR User Manual Page 4
Ikon IR Operation
Introduction: The ADJ Ikon IR is a rotating gobo projector. This fixture
is designed for mobile DJ’s, clubs, bands, roller rinks and any arena
that requires a compact, light weight, easy to use unit. This fixture is
also suitable for theaters, studios, retail stores, and other similar loca-
tions.
Power Supply: The ADJ Ikon IR contains a automatic voltage switch,
which will auto sense the voltage when it is plugged into the power
source. With this switch there is no need to worry about the correct
power voltage, this unit can be plugged in anywhere.
Operation: This fixture is designed to operate as a stand alone, rotat-
ing gobo projector, there is no need of a DMX controller. It has been
tested and there is no assembly necessary. The kon IR is ready to I
be plugged in out of the box. When this fixture is plugged in, the unit
will project the included gobo. Using the bottom knob located at the
back of the unit, you can make the control the gobo rotation speed
and rotation direction. The top knob will let you control output inten-
sity.
After plugging in the unit and there is no LED output check the fuse.
If the fuse has not popped, please contact customer support for fur-
ther instructions. This fixture features a light weight case design and
an adjustable hanging bracket.
ADJ Products, LLC - www.adj.com - Ikon IR User Manual Page 5
The infrared remote gives you control of various functions (See UC IR
below). To control the fixture you must aim the remote at the front of
the fixture and be no more than 30 feet away.
The Ikon IR comes with the Airstream IR remote transmitter. The
transmitter plugs into the headphone jack of your iOS phone or
tablet. To control your IR fixture you must raise the volume to the
maximum on your iOS phone or table and aim the transmitter at the
front of the fixture and be no more than 15 feet away. After you have
purchased the Airstream IR transmitters, the app is a free download
from the app store for your iOS phone or tablet. The app comes with
3 pages of control depending on the IR fixture you are using. Please
see below for IR functions including the corresponding app page.
Works with App page 1.
STAND BY - Pressing this button will blackout the fixture.
FULL ON -This button is invalid for this fixture.
FADE/GOBO - Press this button to activate rotation.
“DIMMER +” and “DIMMER -” - Use these buttons to adjust the out-
put intensity.
1-9 - After pressing the FADE/GOBO button, these buttons will allow
you to select rotation direction and rotation speed. Press buttons 1-4
to select clockwise rotation and speed #1 button being the slowest
and #4 the fastest. Press buttons 6-9 to select counter-clockwise
rotation and speed #6 button being the slowest and #9 the fastest.
Press the #5 button to stop rotation.
SOUND ON & OFF - These button’s are invalid for this fixture.
SHOW - This button is invalid for this fixture.
Ikon IR ADJ UC IR Control
The Ikon IR comes with a replaceable gobo. This gobo can be inter-
changed at any time and allows you to customize your system.
To replace gobo;
1. Unscrew the two screws located at the bottom that secure the
gobo housing.
2. Remove the gobo housing.
3. Once the gobo housing has been removed, remove the retaining
ring that holds the gobo in. This can easily be done using needle
nose pliers.
4. Remove and replace the gobo with your desired replacement.
Reinsert the retainer ring, and make sure the ring rests firmly
against the gobo.
5. Slide the gobo assembly back into place, and secure the housing
with two screws.
Ikon IR Gobo Replacement
Product specificaties
| Merk: | American DJ |
| Categorie: | Effect machine |
| Model: | Ikon IR |
Heb je hulp nodig?
Als je hulp nodig hebt met American DJ Ikon IR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Effect machine American DJ
15 November 2024
3 Juli 2024
12 Mei 2023
9 Mei 2023
9 Mei 2023
7 Mei 2023
4 Mei 2023
27 April 2023
22 April 2023
19 April 2023
Handleiding Effect machine
- Effect machine BeamZ
- Effect machine Behringer
- Effect machine Boss
- Effect machine HQ
- Effect machine HQ Power
- Effect machine Konig
- Effect machine Manta
- Effect machine Martin
- Effect machine Max
- Effect machine Midas
- Effect machine Monacor
- Effect machine Nedis
- Effect machine Pyle
- Effect machine Showtec
- Effect machine Velleman
- Effect machine Viking
- Effect machine Westinghouse
- Effect machine JB Systems
- Effect machine Monoprice
- Effect machine NGS
- Effect machine Steren
- Effect machine Eurolite
- Effect machine Antari
- Effect machine Chauvet
- Effect machine QTX
- Effect machine Valcom
- Effect machine Karma
- Effect machine Adj
- Effect machine Elation
- Effect machine Valueline
- Effect machine Fredenstein
- Effect machine TC Electronic
- Effect machine Elysia
- Effect machine Stairville
- Effect machine Black Lion Audio
- Effect machine Laserworld
- Effect machine TCM FX
- Effect machine Drawmer
- Effect machine ColorKey
- Effect machine Evo-Lite
- Effect machine Blizzard
- Effect machine Hazebase
- Effect machine IGS Audio
- Effect machine Cameo
- Effect machine Sagitter
- Effect machine DJPower
- Effect machine Doepfer
- Effect machine Fun Generation
- Effect machine Lotronic
- Effect machine IMG Stage Line
- Effect machine Lexicon
- Effect machine Futurelight
- Effect machine The Confetti Maker
- Effect machine Eliminator Lighting
- Effect machine BoomTone DJ
- Effect machine Klark Teknik
- Effect machine Lab Gruppen
- Effect machine Audibax
- Effect machine Magmatic
- Effect machine Technical Pro
- Effect machine Rosco
- Effect machine Showven
Nieuwste handleidingen voor Effect machine
4 December 2024
30 November 2024
20 November 2024
19 November 2024
16 November 2024
7 November 2024
7 November 2024
7 November 2024
7 November 2024
7 November 2024