Alpine X901D Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Alpine X901D (48 pagina's) in de categorie Navigator. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/48
R
FOR CAR USE ONLY/NUR FÜR AUTOMOBILGEBRAUCH/POUR APPLICATION AUTOMOBILE
UNIQUEMENT/SOLO PARA USO EN AUTOMÓVILES/PER IL SOLO UTILIZZO IN AUTOMOBILE
EN
DE
FR
ES
IT
XXL PREMIUM NAVIGATION SYSTEM
X901D-DU
Fiat Ducato
Installation Manual
Einbauanleitung
Manuel d’installation
Manual de instalación
Manuale di installazione
1-EN
EN
Before installing or connecting the unit, please read
the following thoroughly for proper use.
WARNING
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connecti
ons may result in fire or product
damage.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to electrical
shorts.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.
Arrange wiring and cables in compli
ance with the manual to prevent
obstructions when driving. Cables
or wiring that obstruct or hang up
on places such as the steering wheel, shift lever, brake pedals, etc. can
be extremely hazardous.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to
supply power to other equipment.
Doing so will exceed the current
carrying capacity of the wire and
result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING
HOLES.
When drilling holes in the chassis for installation, take precautions so
as not to contact, damage or obs
truct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precautions may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR
STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or ta
nks should NEVER be used for
installations or ground
connections. Using such parts could disable
control of the vehicl
e and cause fire etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF
THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed, consult a
physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH
AS THE STEERING WHEEL
OR SHIFT LEVER.
Doing so may obstruct forward visi
on or hamper movement etc. and
results in serious accident.
DO NOT OBSTRUCT AIRBAGS OR ANY OTHER SAFETY
RELEVANT PARTS OF THE VEHICLE WHILE INSTALLING
THE PRODUCT.
Doing so may lead to failure of
the vehicle's safety systems and
results in severe injury or death.
If you are unclear where such parts
are located, please review your ca
r's user manual or contact your car
manufacturer.
CAUTION
HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS.
The wiring and installation of this
unit requires special technical skill
and experience. To ensure safety,
always contact the dealer where you
purchased this product to have the work done.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
Be sure to use only the specified accessory parts. Use of other than
designated parts may damage this unit internally or may not securely
install the unit in place. This may cause parts to become loose
resulting in hazards or product failure.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like the seat
rails) or sharp or pointed edges. This will prevent crimping and
damage to the wiring. If wiring passes through a hole in metal, use a
rubber grommet to prevent the wire's insulation from being cut by the
metal edge of the hole.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE
OR DUST.
Avoid installing the unit in locations
with high incidence of moisture
or dust. Moisture or dust that penetrates into this unit may result in
product failure.
PRECAUTIONS
Be sure to disconnect the cable from the (–) battery post before
installing your X901D-DU. This will
reduce any chance of damage
to the unit in case of a short-circuit.
Be sure to connect the colour code
d leads according to the diagram.
Incorrect connections may cause th
e unit to malfunction or damage
to the vehicle's electrical system.
When making connections to the vehicle's electrical system,
be aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for this
unit. When connecting the X901D-DU to the fuse box, make sure
the fuse for the intended circuit of the X901D-DU has the
appropriate amperage. Failure to do
so may result in damage to the
unit and/or the vehicle. When in doubt, consult your Alpine dealer.
WARNING


Product specificaties

Merk: Alpine
Categorie: Navigator
Model: X901D

Heb je hulp nodig?

Als je hulp nodig hebt met Alpine X901D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Navigator Alpine

Handleiding Navigator

Nieuwste handleidingen voor Navigator