Alpine KIT-W997SMTB Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Alpine KIT-W997SMTB (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
1
IF IN THE VEHICLE SETTINGS THERE ISN'T THE
CHANGE TIME MENU,
AND YOU WANT TO SET THE VEHICLECLOCK?
PLEASE FOLLOW THE PROCEDURE BELOW:
4
Steering wheel remote control
interface installation kit for:
SMART
Model: For Two / For Four
Year: 2012 >
Kit content: SWRC CAN Bus interface
wiring harness
antenna adapter
radio adapter
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidental or indirect damages.
06/2020 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
ATTENTION: CHANGE TIME MENU
- The vehicle must be stationary with the handbrake on
- Turn on and off the vehicle (Key in pos. n°2) for three times;
- Use "volume +" to increase the hours
- Use "Volume -" to increase the minutes
- Use "Voice" to change 12h/24h format
To exit the menu, switch off the
car for at least 5 sec.
NOTE:
When turning on the car, the clock's hands automatically reach the
correct time.
Please note that the clock can have a variation of roughly 1 minute per
month.
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidental or indirect damages.
06/2020 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
INSTALLATION MANUAL
2A
6
5
7
89
10
11
3
41
2
Content and wiring harness connections
3
Connect cables to the radio side as follow:
1 - to CAR CONNECTOR (connect with original rear view camera only)
2A/2B - to CAR CONNECTORS
3 - CAMERA control / REMOTE output
4 - to the RADIO STEERING WHEEL REMOTE SOCKET
(NOTE: do not connect to microphone socket)
5 - to RADIO POWER CONNECTOR
6 - to RADIO ANTENNA CONNECTOR
7 - to CAR ANTENNA CONNECTOR
8 - CONNECTORto 10
(if the vehicle is equipped with the original touchscreen radio)
9 - to CONNECTOR 10
(if the vehicle is NOT equipped with the original touchscreen radio)
11 - to 2A CONNECTOR (if the original radio is equipped with NAVI)
12 - to CAR CONNECTOR (if the original radio is equipped with NAVI)
13 - to RADIO CAMREA connector
(if the vehicle is equipped with OEM REAR VIEW CAMERA)
14 - SPEEDPULSE output
12
1- Volume +
2- Volume –
3- Short press > Accept incoming call
Long press > Voice
cut along the dottd line - copy for the vehicle owner
1
2
3
ATTENTION!
In order to prevent ESD damage, the WHEEL REMOTE JACK must be
connected before plugging in the connectors on car side.
2B
14
13


Product specificaties

Merk: Alpine
Categorie: Niet gecategoriseerd
Model: KIT-W997SMTB

Heb je hulp nodig?

Als je hulp nodig hebt met Alpine KIT-W997SMTB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Alpine

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd