Alpine KIT-6IDVII Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Alpine KIT-6IDVII (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 193 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
1
14. Connectivity Layout
8
INSTALLATION MANUAL
IVECO
Model: Daily VII
Year: > 2019
Kit content: double DIN facia plate; mounting
brackets + screws; SWRC CAN bus & LIN bus
wiring harness; antenna adapters; camera
adapter; USB/AUX adapter; speaker adapter
32
Content and wiring harness connections
1 - to RADIO connector
2 - to CAR connector
3 - POWER ANTENNA output
4 - REMOTE output
5 - to LIN BUS - to Brown cable
(point 7 page 4-5)
6 - to LIN BUS - to White cable
(point 7 page 4-5)
7 - SPEED output (Green) to β†’
SPEED input of Head Unit
11 - Configuration setting S1/S2
(point 7 / page 4-5)
9 - for future reference:
Black GROUND–
Yellow POWER 12V+–
Red ACC (IGNITION)–
10 - to WIRED SWRC REM Socket
11 - Speaker connection (point 9 / page 6)
12 5)- CAN BUS access (point 7 / page 4-
13 - FAKRA antenna adapter
14 - ISO/DIN antenna adapter
15- USB/AUX adapter
OPTIONAL 1 C1 (point 7 / page 4-β†’5)
OPTIONAL 2 (point 9 / page 6)β†’
1. This is how the original dashboard looks
like.
2. Remove the drawer and unscrew the
two screws as shown in the picture.
3. Remove the rubber compartment as
shown in the picture.
4. Unscrew the central screw and remove
the original facia.
5
6
4
7
9
13
10
Optional 1
Optional 2
1
3
2
11
12
14 15
8
5. In order to fit the radio unit some plastic
parts need to be cut and removed. The
parts to be removed are the four flaps
and the plastic rectangular central
protrusion highlighted in the pictures.
6. Connect the harness as indicated on left
side (page 2).
ATTENTION!
In order to prevent ESD damage, the STEERING WHEEL REMOTE JACK (10)
must be connected before plugging in the connectors on car side.
CONFIGURATION STEP 1 STEP 2
Configuration radio steering wheel without
controls and open dash
C2 and C3 connected. S1 and S2 connected.not
Configuration with radio steering wheel
controls and open dash
Remove the tape and connect the Brown and
thin White cable to cable (5&6) (see page 2)
of the interface harness.
C1 and C3
connected. S1 and S2 –not
connected.
Configuration with radio steering wheel
controls and DAB radio
C2 and C3 connected. S1 and S2 connected.
Configuration with radio steering wheel
controls and -CONNECT radioHI
Not compatible with Daily VII and HI-CONNECT
radio
7. Set the harness according to the configuration of your vehicle.
5


Product specificaties

Merk: Alpine
Categorie: Niet gecategoriseerd
Model: KIT-6IDVII

Heb je hulp nodig?

Als je hulp nodig hebt met Alpine KIT-6IDVII stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Alpine

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd