Allegri Lucia 029952-042 Handleiding

Allegri Lamp Lucia 029952-042

Lees hieronder de 📖 handleiding in het Nederlandse voor Allegri Lucia 029952-042 (3 pagina's) in de categorie Lamp. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
Step 1. Hold the wire and screw the center stem to the main fixture as shown.
Fixture Assembly
WARNING - TO REDUCE THE RISK OF FIRE OR INJURY PLEASE TAKE PRECAUTION AND FOLLOW
THE STEPS BELOW.
1. If you are unfamiliar with electrical wiring, call a qualified electrician to install this unit. More than one person may
be necessary to install fixture, make sure you have enough qualified help.
2. Turn off the power to the fixture's circuit at the service panel. Use a voltage detector to verify that the power is off.
3. DO NOT install bulb which exceeds the maximum wattage specified on the socket label.
If you have any questions or problems assembling your fixture please call us for assistance.
Customer Service: (702) 361-4345 or (800) 525-2655
customer.service@kalco.com
SI VOUS AVEZ DES QUESTIONS OU DES PROBLÈMES ASSEMBLAGE DE VOTRE DISPOSITIF S'IL VOUS
PLAÎT APPEL POUR L'ASSISTANCE.
Customer Service: (702) 361-4345 or (800) 525-2655
customer.service@kalco.com
AVERTISSEMENT - POUR RÉDUIRE LES RISQUES D'INCENDIE OU DE BLESSURES S'IL VOUS PLAÎT
PRENDRE DES PRÉCAUTIONS ET SUIVEZ LES ÉTAPES CI-DESSOUS.
1. Si vous n'ĂȘtes pas familier avec le cĂąblage Ă©lectrique, appelez un Ă©lectricien qualifiĂ© pour installer cet appareil.
Plus d'une personne peut ĂȘtre nĂ©cessaire d'installer appareil, assurez vous que vous disposez de l'aide assez
qualifié.
2. Coupez l'alimentation au circuit de l'appareil sur le tableau de service. Utiliser un détecteur de tension pour vérifier
que l'alimentation est coupée.
3. NE PAS installer l'ampoule qui excÚde la puissance maximale indiquée sur l'étiquette du socket.
Assembly & Installation Instructions for:
029952-042 8LT PENDANT LUCIA
WIRES
CENTER STEM
MAIN FIXTURE
Step 2. Fasten nipple into mounting plate so
that they extend away from the ceiling
when the mounting plate is installed.
Lock in place using the hex nut &
washer provided.
Step 3. Attach mounting plate to outlet box with
the (2) 8-32 x Ÿ” screws.
Step 4. Determine fixture height. Make adjustment
if needed. Attach chain to fixture using
open link.
Step 5. Lace wires through the chain links ( every
other link ) .
Step 6. Refer to wiring diagram.
With wire carefully threaded thru canopy,
connect the black supply wire to the
smooth fixture wire with wire connector,
connect the white supply wire to the
ribbed fixture wire with wire connector.
Connect ground wire from fixture with
supply ground wire.
Step 7. Carefully tuck all wires into outlet box
ensuring that there are no wires pinched
between the canopy and ceiling.
Step 8. Lock in place using the collar loop
ring provided.
HOUSE WIRES
LINE:RIBBED
LINE:SMOOTH
GROUND WIRES
SOCKET (INCANDESCENT)
Black & White supply wires
Customer Service: (702) 361-4345, (800) 525-2655,
customer.service@kalco.com
WHITE &
RIBBED WIRES
COLLAR LOOP
COLLAR LOOP
RING
CANOPY
BLACK &
SMOOTH WIRE
GROUND WIRES
CHAIN LINK
OPEN LINK
FIXTURE LOOP
8/32” x Ÿ “ SCREWS
MOUNTING PLATE
GROUND SCREW
NIPPLE
GROUND WIRE
BLACK & WHITE
SUPPLY WIRE
HEX NUT
Assembly & Installation Instructions for:
029952-042 8LT PENDANT LUCIA
Step 9. Install the bulb, do not use bulbs that exceed 60 Watts.
Customer Service: (702) 361-4345, (800) 525-2655,
customer.service@kalco.com
Assembly & Installation Instructions for:
029952-042 8LT PENDANT LUCIA
SOCKET
60W BULB
SEE CRYSTAL STRAND ASSEMBLY TO DRESS THE FIXTURE
For MOP BALL replacement gently unscrew the damaged MOP BALL and replace a new one.
MOP BALL LOCATION
SCREW MoP BALL


Product specificaties

Merk: Allegri
Categorie: Lamp
Model: Lucia 029952-042

Heb je hulp nodig?

Als je hulp nodig hebt met Allegri Lucia 029952-042 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Lamp Allegri

Handleiding Lamp

Nieuwste handleidingen voor Lamp