Allegri Lina 035561-010-FR001 Handleiding

Allegri Lamp Lina 035561-010-FR001

Lees hieronder de 📖 handleiding in het Nederlandse voor Allegri Lina 035561-010-FR001 (6 pagina's) in de categorie Lamp. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
MODEL 035561-010-FR001
ASSEMBLY AND DRESSING INSTRUCTIONS
Blending innovative design, cutting-edge technology and the grace and elegance of traditional crystal, ALLEGRI® proudly brings you a new approach
to lighting. ALLEGRI® fixtures are made from the finest raw materials and are brought to life through a combination of traditional manufacturing, such
as sand casting, hand-forging and technology driven techniques including laser cutting.
Enclosed are detailed instructions on how to properly install your fixture. Please read all instructions carefully. If you need further assistance, please
contact the dealer from which you purchased this product or call 800-525-2655 to speak with an ALLEGRI® customer service representative. We hope
you enjoy your fixture!
WWW.ALLEGRICRYSTAL.COM
800.525.2655
P1
C10-16-0 9 -0 3
C10 -1 6 -0 9 -0 3
ASSEMBLY AND DRESSING INSTRUCTIONS
GENERAL NOTES
vFor your safety and proper operation of fixture, read and understand all instructions completely before commencing installation.
vThis fixture is suited for dry locations. Never install fixture on damp ceiling; room should be dry and well ventilated.
vExtreme care should be taken to avoid damage to the surface of lighting fixture and wires. Wearing gloves is recommended for installation.
vConnect ribbed wire of lighting fixture to live wire, while smooth wire of lighting to neutral. Connect bare copper or silver color ground wire of
fixture to the double colored or green wire of outlet box.
vUse UL LISTED wire nuts for the wiring connections in this fixture. Wrap wire nut connections with UL LISTED electrical tape.
vKeep lighting away from acid, alkali and other corrosive chemical or gas; clean the fixture with a clean cloth only.
vFixture must be firmly secured when installing ceiling tube, chain pipe and other connecting parts.
vNever cover the lighting fixture when power is connected.
vDisconnect the power before installing, cleaning and/or replacing light bulb.
vExtreme care should be taken when installing and cleaning of Glass and/or Crystal Components.
vThis product is rated 110-130V/60HZ bulb 40W Maximum.
vSave these instructions for future reference.
WARNING
The electricity must be turned off at the main fuse box or circuit breaker before installing this fixture. Turning the power off using the light switch may
not be sufficient to prevent electrical shock.
*ALLEGRI will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
WARNING!
CONTENTS ARE FRAGILE
HANDLE WITH CARE
THE METAL FRAME, FINISH AND CRYSTAL COMPONENTS OF THIS CHANDELIER ARE VERY DELICATE.
PLEASE EXERCISE EXTREME CAUTION DURING UNPACKING AND INSTALLATION.
PLACE ALL PIECES TOGETHER IN A NUMERICAL ORDER AND IN THE ORIENTATION DEPICTED.
REFER TO THE PARTS LIST TO AVOID ANY CONFUSION BETWEEN PARTS THE PARTS NUMBER MUST COINCIDE.
CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY AND
PROPERTY DAMAGE. All electrical components must be installed only by a Licensed Electrician.
This product must be installed in accordance with the National Electric Code (NEC), and appropriate local electrical code(s), by a
person familiar with the construction and operation of the product and the hazard involved.*
CAUTION: Do not exceed maximum wattage note on fixture. Uses only recommended bulbs with fixture.
WWW.ALLEGRICRYSTAL.COM
866.820.2665
P2
CANOPY MOUNTING INSTRUCTION
WWW.ALLEGRICRYSTAL.COM
800.525.2655
WARNING
Electrical Danger Turn Power Off
All electrical components must be
installed by a licensed electrician in
accordance with the National
Electric code and the appropriate
local electrical codes.
cR
P3
8/32"screw (not provided)
Anchor Screw (not provided)
Anchor (not provided)
Canopy
INSTALLATION:
1. Present crossbar plate to outlet box and mark the anchor
srcrew placement on ceiling, then install anchors
2. Install crossbar plate to outlet box using 8/32" screws
3. Screw anchor screws, make sure the crossbar plate does
not bow.
4. Adjust aircraft cables and power cord to desired lenght on
canopy
5. Raise fully assembled fixrture close enough to outlet box
and while someone else holds it make wire connections
6. Raise canopy flat to the ceiling and secure with canopy
flat head screws.
Canopy Screw
Outlet Box (not provided)
CrossBar plate


Product specificaties

Merk: Allegri
Categorie: Lamp
Model: Lina 035561-010-FR001

Heb je hulp nodig?

Als je hulp nodig hebt met Allegri Lina 035561-010-FR001 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Lamp Allegri

Handleiding Lamp

Nieuwste handleidingen voor Lamp

EMOS

EMOS P3304 Handleiding

2 December 2024
EMOS

EMOS P3111 Handleiding

2 December 2024
EMOS

EMOS P3380 Handleiding

2 December 2024
EMOS

EMOS P2307 Handleiding

2 December 2024
EMOS

EMOS P2311 Handleiding

2 December 2024
EMOS

EMOS P3114 Handleiding

2 December 2024
EMOS

EMOS P3115 Handleiding

2 December 2024
EMOS

EMOS P2313 Handleiding

2 December 2024
EMOS

EMOS DCWW31 Handleiding

2 December 2024