Alcatel E190 Voice Duo Handleiding

Alcatel Telefoon E190 Voice Duo

Lees hieronder de 📖 handleiding in het Nederlandse voor Alcatel E190 Voice Duo (2 pagina's) in de categorie Telefoon. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

USER'S GUIDE

E130 / E130 Duo / Trio

E190 / E190 Duo / Trio

Charging batteries for the first time

Before you start to use your telephone make sure that all batteries are

fully charged for 15 hours.

Important note: This telephone is not designed for Emergency calls

when the mains power fails.

For Emergency calls you should have a basic phone that operates

without mains power, connected to your line so that you can make calls

during a power failure.

Phone Function Keys

1 OK key

Press to select the function displayed on the handset screen directly

above it.

2 Back/clear key

Press to delete a digit/a character in editing mode.

Press to return to idle mode.

Press and hold to change the handset idle display between handset

name and date/time.

3 Navigation key

Press UP to access the call log* and press DOWN to access the

phonebook when in idle mode.

Press UP/DOWN to increase or decrease earpiece volume during a call.

Press UP/DOWN to increase or decrease handsfree volume (E190 only).

Scroll up/down a list.

4 Talk key

Handsfree (E190 only).

5 Hang-up/Exit key

Press and hold to switch the handset power on/off.

Press to end a call.

Press to return to idle mode in other menus.

6 Recall (Flash) key

Access to operator services*

7 Menu key

Press to access the main menu.

8 Redial key

Press to access the Redial list.

9 Star key

Press and hold to lock/unlock keypad.

Press and hold to toggle between the external and internal calls when

both are set up.

10 Hash key

Press and hold to insert a pause during a call.

Press and hold to turn the ringer on/off.

11 Mute key

Press to mute / unmute the handset microphone.

12 Call transfer/Intercom key

Press to initiate an internal call.

Press to hold the line and page another handset during a call.

Press and hold to initiate a conference call.

*Subject to subscritption and availability of the service from the fixed

line operator.

HANDSET LOCATOR button

Press to page handsets.

Press and hold to start registration

procedure.

Base station

What’s on the display?

A Display Icons

B Displays when in menu mode to confirm your selection.

C Indicates that more options are available.

Use the UP / DOWN keys to scroll up/down.

D Displays when in menu mode.

Select BACK to return to the previous menu level.

Select BACK to delete the last digit / character entered.

Read First Before Use

Choosing a site for the base unit and charger pod

If you have a Broadband line

If you connect your telephone to a line with a broadband connection,

you will need to insert a microfilter between the telephone and the

telephone line, otherwise you may get interference between the

telephone and the broadband, which could cause problems.

The base unit and charger pod(s) should be placed on a level surface,

in a position where:

• the mains adapter plug will reach an easily accessible 230-V AC

switched mains supply socket - never try to lengthen the mains

power cable

• the base unit’s telephone line cable will reach you telephone line

socket or extension socket (the charger pod does not have a

telephone line connection)

• it is not close to another telephone - this can cause radio interference

• it is not close to a sink, bath or shower, or anywhere else where it

might get wet

• it is not close to other electrical equipment - fridges, washing

machines, microwave ovens, fluorescent lights, televisions etc.

• it is away from hot, humid conditions and strong sunlight

Radio signals between handset and base unit

To use your handset and base unit together, you must be able to

maintain a radio link between them. Be aware that any large metal

objects, like a refrigerator, a mirror, filing cabinet, etc, between the

handset and the base unit may block the radio signal. Other solid

structures, like walls, may reduce the signal strength.

Mains power connection

IMPORTANT - The base unit and charger pod must be used with the

mains adapters supplied with the unit.

Using any other adapter will result in non-compliance with EN60950,

and will invalidate any approval given to this apparatus.

Battery safety - CAUTION

ONLY use the rechargeable batteries supplied with the handset.

DO NOT use non-rechargeable batteries - they may explode and

cause damage to your telephone.

Installation and Set-up

Fit the rechargeable batteries in each handset

1. Install the AAA batteries (Brand name: CORUN, Capacity: Ni-MH

1.2V/300mAH, or Brand name GREPOW, Capacity: Ni-MH

1.2/300mAH) into

Handset in accordance with the polarity marked in the battery

compartment.

2. Close the battery compartment cover, sliding it into place and

pressing firmly to make sure it is secure.

Connecting AC (electrical) power

1. Plug the base adaptor cord into the power jack on rear panel of the

base and the other end into a 100-240Vac 50-60Hz electrical outlet.

2. Connect telephone line cord into the phone jack on rear panel of the

base and the other end into a main socket.

3. In case of twin or triple system, plug the charger power adaptor cord

into the power jack on rear panel of charger and the other end into a

100-240Vac 50-60Hz electrical outlet.

Before you use the cordless handset for the first time, it’s important

to charge the batteries fully.

Leave the handset on the charging cradle for 15 hours.

CAUTION: Use only the power supply that came with this unit. Using

other power supplies may damage the unit.

Base and charger power adaptor :

Base: S003GV0600050

Charger: S003GV0600015

Input: 100-240V / 50-60Hz

Output: 6V DC / 500mA(Base)

6V DC / 150mA(Charger)

Your Telephone Operations

Switching on/off

Press and hold the HANG-UP/EXIT key for more than 2

seconds to switch on/off the handset in idle mode.

Note: When the handset is OFF, it cannot be used for making

calls including emergency calls. There will be no ringing

Make and answer calls

Make a call

Predialling

Dial the number (maximum 24 digits) and then press TALK key.

Direct dialling

Press TALK key to take the line and then dial the number

(maximum 24 digits).

Call from redial list

Press REDIAL key in idle mode.

Press the Navigation key to an entry in the redial list and then

press TALK key.

Call from the call log

Press CALL LOG key in idle mode.

Press the Navigation key to an entry in the call list and then

press TALK key.

Note: You need to subscribe to Caller Line Identification service to be

able to see the caller’s number or name in the call log.

Call from the phonebook

Press PHONEBOOK key in idle mode.

Press the Navigation key to an entry in the phonebook and then

press TALK key.

Answer and end a call

1. When the phone rings, press TALK key.

2. To end a conversation, press HANG-UP/EXIT key.

IMPORTANT NOTE: You can simply place the handset back on its

base station or charger pod to end the call.

Use handsfree (only for E190)

Press TALK key at any moment in normal talk mode to talk in

handsfree mode.To deactivate the handsfree mode, press again the

TALK key to talk in normal talk mode.

Adjust the earpiece volume

During a call, press the Navigation key to select from VOLUME 1 to

VOLUME 5.

Mute/unmute microphone

When the microphone is muted, the handset displays , and MUTE ON

your caller cannot hear you.

During a call, press the MUTE key to turn on/off the microphone.

Paging

The paging feature enables you to locate a missing handset if the

handset is in range and contains charged batteries.

Press HANDSET LOCATOR key located at the back of the

base station. All the registered handsets start to ring.

Once retrieved, press any key on the handset or the HANDSET

LOCATOR key again to end the paging.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN

INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE

INSTRUCTIONS.

What the icons mean?

Indicates battery is fully charged.

Indicates battery is fully discharged.

Indicates that an external call is connected or held.

Icon blinks when receiving an incoming call.

Indicates you have a new Voice Mail message.

Indicates you have new missed calls, or the call log is being viewed.

Displays when the phonebook is accessed.

Displays when the alarm clock is activated.

Displays when handsfree is activated (E190 only).

Displays when ringer volume is turned off.

Displays when in menu mode to confirm your selection.

Indicates that more options are available.

Use the UP / DOWN keys to scroll up/down.

Indicates that the handset is registered and within range of the

base station.

Icon blinks when the handset is out of range or is searching for a

base.

Displays when in menu mode.

Select BACK to return to the previous menu level.

during an incoming call. To answer a call, you will need to

switch it back on. It may take some time for the handset to

re-establish a radio link with the base unit.

To lock/unlock the keypad

Press and hold the STAR key for 1 second to lock /

unlock the keypad in idle mode.

Note: Incoming calls can still be answered even if the keypad was locked.

Set time and date

Note: If you subscribe to the Caller Display service, the time and date

will be set automatically when you receive a call, but you may still need

to set the correct year.

1. Press MENU key to enter menu selection.

2. Press the Navigation key to select and then press CLOCK&ALARM

OK key to select.

3. Press OK key to select . The last stored date is displayed.DATE/TIME

Enter the current date (YY-MM-DD), press OK, then enter the time

(HH-MM).

4. Press the Navigation key to select or (if the time is in 12 AM PM

HOURS format) and then press OK key to confirm. A confirmation

beep is played.

Change the display language

1. Press MENU key to enter menu selection.

2. Press the Navigation key to select and then press PERSONAL SET

OK key to select.

3. Press the Navigation key to select and then HANDSET NAME

press OK key to select. The current handset name is displayed.

4. Press BACK/CLEAR key to delete the characters one by one.

Enter the new name (maximum 10 characters) and press OK key to

confirm.

A confirmation beep is played.

Change the display language

1. Press MENU key to enter menu selection.

2. Press the Navigation key to select and then press PERSONAL SET

OK key to select.

3. Press the Navigation key to select and then press OK LANGUAGE

key to select.

4. Press the Navigation key to your desired language and press OK

key to confirm. A confirmation beep is played.

Note : Once the display language is set, the option menus on the

handset will switch to display in the selected language immediately.

Call waiting

If you have subscribed to Call Waiting service, the earpiece will emit a

beep tone to inform you that there is a second incoming call. The

number or name of the second caller will also be displayed on your

phone if you have subscribed to Caller Line Identification service (CLI).

Please contact your network provider for more information on this

service.

Using your phonebook

Your phone can store up to 50 phonebook memories.

How to enter characters?

When you select a field in which you can enter text, you can enter the

letters that are printed on the keys by pressing the relevant key once or

several times.

For example, press once to insert the letter ‘A’, press twice

to insert the letter B, and so on... Spaces and other symbols can be

entered using the or key.

Store a contact in the phonebook

1. Press MENU key to enter menu selection.

2. Press the Navigation key to select and then press PHONEBOOK

OK key to select.

3. Press OK key again to enter .NEW ENTRY

4. Enter the name of the contact (maximum 12 characters). To edit,

press BACK/CLEAR key to delete the last character entered. Press

OK key to confirm the name entry.

5. Enter the number of the contact (maximum 24 digits) and then

press OK key to confirm. A confirmation beep is played.

Access phonebook

1. Press PHONEBOOK key in idle mode to browse the

phonebook entries. Alternatively, you can press the MENU key, to

display PHONEBOOK and then press OK key to select.

2. Press the Navigation key to select and then press OK key to LIST

confirm. The phonebook entries will be listed in alphabetical order,

and you can press Navigation key to scroll through the stored entries.

3. Press OK key to view the details of the selected entry.

Note : Instead of pressing the Navigation key to browse the phonebook

entries, you can press the numeric key corresponding to the first letter

of the entry you wish to locate.

Modify a phonebook entry

1. Press MENU key to enter menu selection.

2. Press the Navigation key to select and then press PHONEBOOK

OK key to select.

3. Press the Navigation key to select and then press OK EDIT ENTRY

key to select.

4. Press the Navigation key to select an entry to edit and then press

OK key. The current name is displayed. Edit the name and then

press OK key to confirm.

5. Edit the number and then press OK key to confirm. A confirmation

beep is played.

Delete a phonebook entry

1. Press MENU key to enter menu selection.

2. Press the Navigation key to select and then press PHONEBOOK

OK key to select.

3. Press the Navigation key to select and then press OK key DELETE

to select.

4. Press the Navigation key to select an entry to delete and then press

OK key.

5. Press OK key again to confirm. A confirmation beep is played.

Delete all entries from the phonebook list

1. Press MENU key to enter menu selection.

2. Press the Navigation key to select and then press PHONEBOOK

OK key to select.

3. Press the Navigation key to select and then press OK DELETE ALL

key to select.

4. Press OK key again to confirm. A confirmation beep is played.

Direct access memory

There are 2 direct access memories (Keys 1 & 2) in addition to the

phonebook memory. A long press on the keys in idle mode will

automatically dial the stored phone number.

Add/edit direct access memory

1. Press MENU key to enter menu selection.

2. Press the Navigation key to select and then press PHONEBOOK

OK key to select.

3. Press the Navigation key to select . and then press DIRECT MEM

OK key to select.

4. Press the Navigation key to select or and then press KEY 1 KEY 2

OK key. The stored name is displayed, or if it is NO NUMBER

empty. If there is no number stored for the selected key or if you

want to change the name or number currently stored, press MENU

key to enter direct memory menu to add/edit the name or number.

5. Press the Navigation key to select and then press EDIT NUMBER

OK key to select. The display shows the currently stored name, or

if there is no number stored. Edit or enter the name ENTER NAME

you want and then press OK key. The display shows the currently

stored number, or if there is no number stored. ENTER NUMBER

Edit or enter the number you want and then press OK key to

confirm. A confirmation beep is played.

specific handset number you wish to call, or press * to ring all

handsets, to start intercom.

Transfer an external call to another handset

During the call, press INT key to put the external call on hold

(the caller can no longer hear you).

Intercom is established immediately if there are only 2 registered

handsets. If there are more than 2 registered handsets, the handset

numbers which are available for intercom, and a '*', will be displayed.

Press the specific handset number you wish to call, or press '*' to ring

all handsets, to start intercom.

Press TALK key on the called handset to answer the internal

call, where both internal callers can talk. Intercom is established.

Press HANG-UP/EXIT key on the first handset to transfer the

external call to the called handset. The external call is transferred.

Note : If there is no answer from the called handset, press INT key to

resume the external call.

Answer an external call during intercom

During intercom, a new call tone is emitted when there is an incoming

external call.

Press TALK key to answer the external call and end the intercom.

Connection with the external call is established.

Note : To put the internal call on hold and answer the incoming

external call, press INT key.

Switch between an internal and external call

During the call, press key to switch between an internal

or external call.

Establish a three-party conference call

The conference call feature allows one external call to be shared with

two handsets (in intercom). The three parties can share the

conversation and no additional network subscription is required.

During an external call, press INT key to put the external call on

hold (the caller can no longer hear you).

If there are more than 2 registered handsets, the handset numbers

which are available for intercom will be displayed. Press the specific

handset number you wish to call to start intercom.

Press TALK key on the called handset to answer the internal

call, where both internal callers can talk. Intercom is established.

Press and hold key on the first handset to start the

three-party conference.

CONFERENCE will be displayed on the screen once the

conference call is established.

Handset Tone

Set the ring volume

There are 5 ringer volume options (OFF, LEVEL 1, LEVEL 2, LEVEL 3,

LEVEL 4 and LEVEL 5). The default level is LEVEL 3.

1. Press MENU key to enter menu selection.

2. Press the Navigation key to select and then press PERSONAL SET

OK key to select.

3. Press the Navigation key to select and then press HANDSET TONE

OK key to select and show . Press the OK key RING VOLUME

again to select.

4. Press the Navigation key to your desired volume level and then

press OK key to confirm. A confirmation beep is played.

Set the ring melody

There are 10 ring melodies available on your handset.

1. Press MENU key to enter menu selection.

2. Press the Navigation key to select and then press PERSONAL SET

OK key to select.

3. Press the Navigation key to select and then press HANDSET TONE

OK key to select.

4. Press the Navigation key to select and then press RING TONES

OK to select.

5. Press the Navigation key to your desired melody

and then press OK key to confirm. A confirmation beep is played.

Activate/deactivate key tone

A single tone is emitted when a key is pressed. You can enable or

disable the key tone. By default, the key tone is .ON

1. Press MENU key to enter menu selection.

2. Press the Navigation key to select and then press PERSONAL SET

OK key to select.

3. Press the Navigation key to select and then press HANDSET TONE

OK key to select.

4. Press the Navigation key to select and then press OK to KEY BEEP

select.

5. Press the Navigation key to select or and then press OK ON OFF

key to confirm. A confirmation beep is played.

Activate / deactivate auto hang-up

This function enables you to end a call automatically by simply placing

the handset on the base station. By default, the Auto Hang up feature

is .ON

1. Press MENU key to enter menu selection.

2. Press the Navigation key to select and then press PERSONAL SET

OK key to select.

3. Press the Navigation key to select and then press AUTO HANG-UP

OK key to select.

4. Press the Navigation key to select or and then press OK ON OFF

Delete direct access memory

1. Press MENU key to enter menu selection.

2. Press the Navigation key to select and then press PHONEBOOK

OK key to select.

3. Press the Navigation key to select and then press DIRECT MEM.

OK key to select.

4. Press the Navigation key to select or and then press KEY 1 KEY 2

OK key. The stored name is displayed (or NO NUMBER if it is

already empty).

5. Press MENU key to enter direct memory menu.

6. Press the Navigation key to select and then press OK key DELETE

to select.

Press OK key again to confirm. A confirmation beep is played.

Using the redial list

The redial list stores the last 5 numbers dialed.

Access redial list

1. Press REDIAL key in idle mode and press Navigation key to browse

the redial list. The last number dialed will appear first in the redial list.

2. Press OK key to view the details of the selected entry.

Save a redial number into the phonebook

1. Press REDIAL key in idle mode to go to the redial list.

2. Press the Navigation key to select an entry.

3. Press MENU key to display , then press OK key to SAVE NUMBER

display . Enter the name of the contact (maximum ENTER NAME

12 characters) and then press OK key to save the entry, and

return the display to the redial list.

Using the call log

To receive Caller ID you may need to contact your telephone service

provider, and they will inform you also of any charges for it.Caller ID

lets you see the phone numbers of your callers on the handset display,

before you answer and in your Call Log afterwards.The Call Log stores

the last 10 external calls, whether or not you answered the call, so you

can call them back later.

Only the most recent call is saved if there are repeat calls from the

same number. When the Call Log is full, the next new call will replace

the oldest entry.

If you've got a new call in the Call Log, the Caller Display icon will

appear on the handset display.

If the received number is the same as one in your phonebook, the

name from the phonebook will display as well as the number.

If a call is from someone who withheld their number, the display will

show . WITHHOLD ID

If the call is from someone whose number is unavailable, or if you have

not subscribed to Caller ID but have set the date and time, the display

will show when it is received and in the Call CALLING UNAVAILABLE

Log.

Access call log

Press CALL LOG(UP) key in idle mode and press Navigation key to

browse the call list. The calls are displayed in chronological order with

the most recent call at the top of the list.

1. Press OK key to display more details of the call, including the date

and time.

Save call list entry into the phonebook.

2. Press CALL LOG(UP) key in idle mode to go to the call list.

3. Press the Navigation key to select an entry and then press MENU

key.

4. Press the Navigation key to select and then SAVE NUMBER

press OK key to select.

( Enter the name of the contact (maximum 12 characters) and then

press OK key to confirm.

Delete a Call Log entry

1. Press CALL LOG(UP) key in idle mode to go to the call list.

2. Press the Navigation key to select an entry and then press MENU

key.

3. Press the Navigation key to select and then press OK key DELETE

to select.

(Press OK key again to confirm. A confirmation beep is played.)

Delete all entries in the Call Log

1. Press CALL LOG (UP) key in idle mode to go to the call list.

2. Press the MENU key.

3. Press the Navigation key to select and then press OK DELETE ALL

key to select.

(Press OK key again to confirm. A confirmation beep is played.

Using the intercom

Intercom, call transfer and conference are only possible with at least 2

handset registered to the same base station. It allows you to make free

internal calls, transfer external calls from one handset to another, and

set up a 3-way conference with two handsets and an external call. If

you try to make a call while another handset is already on an external

call, you'll hear a busy tone for a few seconds before the display

returns to idle.

Intercom another handset

Press INT key in idle mode.

Intercom is established immediately if there are only 2

registered handsets.

If there are more than 2 registered handsets, the handset numbers

which are available for intercom, and a * , will be displayed. Press the

key to confirm. A confirmation beep is played.

Set date / time format

You can set your preferred date/time format for your phone. The

default format is and .DD/MM 24 HOURS

Set time format

1. Press MENU key to enter menu selection.

2. Press the Navigation key to select and then press CLOCK&ALARM

OK key to select.

3. Press the Navigation key to select and then press SET FORMAT

OK key to select.

4. Press OK key to enter . The current setting is displayed.TIME FORMAT

5. Press the Navigation key to select or and 12 HOURS 24 HOURS

then press OK key to confirm. A confirmation beep is played.

Set date format

1. Press MENU key to enter menu selection.

2. Press the Navigation key to select and then press CLOCK&ALARM

OK key to select.

3. Press the Navigation key to select and then press SET FORMAT

OK key to select.

4. Press the Navigation key to select and then press DATE FORMAT

OK key to select. The current setting is displayed.

5. Press the Navigation key to select or and then DD/MM MM/DD

press OK key to confirm. A confirmation beep is played.

Set alarm

The handset has an alarm clock feature, and when the alarm is set, the

is shown on the handset display.

When the alarm time is reached, the display flashes -- -- and ALARM

the alarm melody is played for 1 minute or until any handset key is

pressed.

If the alarm is set for and the alarm will sound again on the ON DAILY

next day.

If the alarm was set for , the will be turned off.ON ONCE

1. Press MENU key to enter menu selection.

2. Press the Navigation key to select and then press CLOCK&ALARM

OK key to select.

3. Press the Navigation key to select and then press OK key ALARM

to select.

4. Press the Navigation key to select or OFF, ON ONCE ON DAILY

and then press OK key to confirm. If you select or ON ONCE ON

DAILY, enter the time for the alarm and press the UP / (HH-MM)

DOWN key to select or if the time is in 12 HOURS format.AM PM

5. Press OK key to confirm. A confirmation beep is played.

Set alarm tone

1. Press MENU key to enter menu selection.

2. Press the Navigation key to select and then press CLOCK&ALARM

OK key to select.

3. Press the Navigation key to select and then press ALARM TONE

OK key to select.

4. Press the Navigation key to select , or MELODY 1 MELODY 2

and then press OK key to confirm. A confirmation beep MELODY 3

is played.

Advanced use of your telephone

Change Master PIN

The Master PIN is used for registration/unregistration of handsets. The

default Master PIN number is 0000.

Note : If you forget your PIN code, you can reset it to its default 0000

using a handset Reset.

1. Press MENU key to enter menu selection.

2. Press the Navigation key to select ADVANCED SET and then press

OK key to select.

3. Press the Navigation key to select and then press CHANGE PIN

OK key to select.

Enter the current Master PIN when prompted and then press OK key to

confirm. As you enter the PIN it will be shown as asterisks (*) on the

screen.(Enter the new PIN and then press OK key to confirm. A

confirmation beep is played.)

IMPORTANT : When you purchase a telephone, all handsets are

already registered to the base, so you do not need to register them.

Handset registration is only necessary when you buy extra handsets or

if a handset has become faulty.

The procedure described below is for E130 or E190 . They may be

different if you want to register another handset model, in which case

you should refer to its user guide.

Additional handsets must be registered to the base unit before you can

use them. Up to 4 handsets can be registered to one base station.The

Master PIN is required before you can register or unregister handsets.

By default, the Master PIN is 0000.

On the base station, press and hold the HANDSET LOCATOR key for

approximately 5 seconds.

1. On the handset, press MENU key to enter menu selection.

2. Press the Navigation key to select ADVANCED SET and then press

OK key to select.

3. Press the Navigation key to select REGISTRATION and then press

OK key to select.

Note : If no action is taken on the handset within 10 seconds, the

registration procedure will be aborted. If this happens, repeat the first

step.WAITING is displayed on the screen. A confirmation beep is

played to indicate successful registration, and the handset will return to

idle mode, with its handset number displayed.

Note : If no base is found within a certain period, an error tone to

indicate failed registration and the handset returns to idle mode, and

you will need to repeat the registration sequence.

Unregister your handset

1. Press MENU key to enter menu selection.

2. Press the Navigation key to select and then press ADVANCED SET

OK key to select.

3. Press the Navigation key to select and then press UNREGISTER

OK key to select.

4. Enter the Master PIN when prompted and then press OK key to

confirm. (the default master PIN is 0000)

5. Press the Navigation key to select the handset number to unregister

and then press OK key to confirm.

A confirmation beep is played to indicate successful unregistration.

Note : If no action is taken on the handset within 15 seconds, the

unregistration procedure will be aborted and the handset returns to idle

mode.You must use another handset to unregister handsets from the

base.

Change recall time

You may need the R button to send a Recall signal (also called Flash

or Timed Break Recall) if you are connected to a PBX. You should

normally leave the Recall Time at its default setting of Short (100ms),

as this is the standard recall required in the telephone network, but it

can be changed to Medium (270ms) or Long (600ms) if your telephone

is connected to a PBX that requires a different recall time.

1. Press MENU key to enter menu selection.

2. Press the Navigation key to select and then press ADVANCED SET

OK key to select.

3. Press the Navigation key to select and then press RECALL TIME

OK key to select.

4. Press the Navigation key to select or and SHORT, MEDIUM LONG

then press OK key to confirm. A confirmation beep is played.

Change the dial mode

You should normally leave the dialling mode at its default setting of

TONE PULSE. However, you can change to if necessary.

Note: PULSE If dialling is set, you can press the * key to switch to

TONE dialling for the rest of that call.

1. Press MENU key to enter menu selection

2. Press the Navigation key to select and then press ADVANCED SET

OK key to select.

3. Press the Navigation key to select and then press OK DIAL MODE

key to select.

4. Press the Navigation key to select or and then press TONE PULSE

OK key to confirm. A confirmation beep is played.

Reset unit

You can reset your phone to its default settings with this feature.

Note: Upon reset, all your personal settings, call log and redial list

entries will be deleted and the phone will return to its default settings.

However, your phonebook will remain unchanged after reset.

1. Press MENU key to enter menu selection.

2. Press the Navigation key to select and then press ADVANCED SET

OK key to select.

3. Press the Navigation key to select and then press OK key RESET

to select.

4. Press OK key again to confirm. A confirmation beep is played and

the unit is reset to its default settings.

Troubleshooting

If you have difficulty with your phone, please try the suggestions listed

below. As a general rule, if a problem occurs, remove the batteries

from all the handsets in your installation for about 1 minute, then

disconnect and reconnect the power supply to the base and reinstall

the handset batteries.

A AYS LW check first that :

You have followed all the steps listed in the user manual to install and

set up your telephone. All connectors are firmly inserted in their

sockets. Mains power to the base unit is switched on at the socket.

The handset’s batteries are correctly and securely installed and are

not run down.

Everyday use

“I cannot make or answer calls”

If the handset’s display is blank, it may have been switched off. Press

and hold the HANG-UP/EXIT key to switch it back on. Check that the

base unit’s mains power adapter is plugged in and power is switched

on. The base unit needs mains power for normal operation of the

phone – not just for charging the batteries. Make sure you are using

the telephone line cable supplied with your telephone. Other telephone

line cables might not work. Move the handset closer to the base unit.

Check the battery level symbol on the display. If it is low, replace the

handset on the base unit or charger pod to recharge the batteries.

Switch off power at the mains socket, wait for a short time and then

switch back on. This may solve the problem.

“I cannot make a call”

If the handset display shows KEYS LOCKED, press and hold the *

button to unlock it before you make a call. Only one handset (or the

base unit) can be connected to the outside line at a time. If another

handset is already using the line, you need to wait until it has finished

its call.

“When I press on the keys,nothing happens”

Make sure the batteries are fitted in your handset. If the Battery Level

symbol on the display shows ‘low’, put your handset back on the cradle

to charge.

“When I key in a number, it appears on the display, but Icannot make

an outside call”

Try a different position for the base unit – somewhere higher if

possible, or further from other electrical equipment. Try moving the

handset closer to the base unit.

“The phone does not ring”

Check that the base unit’s mains power adapter is plugged in and

power is switched on. Check that ring volume is not on OFF.

“I hear ‘beeps’ from my handset while I’m on a call”

You may be going out of range of the base unit. Move closer or your

call may be cut off. Check the Battery Level symbol on the display. If

it’s low, recharge the batteries.

“When I try to make a call, I hear busy tone”

If you’re using a multi-handset system, check whether another handset

is already on a call.

“The volume in the earpiece is low when I’m on a call”

Make sure you’re holding the earpiece correctly over your ear. Adjust

the volume using the UP/DOWN key.

Batteries

“The handset’s battery cells are running low within an hour or two”

Before you first use the handset, you should have left it on the base

unit or charger pod for 15 hours to charge the batteries fully. You may

need to replace the batteries. Check the connection between the base

unit and the mains power socket.

“I try to recharge the batteries but I still get a warning that they are low”

You need to replace the batteries. Dispose of used batteries safely –

never burn them, or put them where they could get punctured. Do not

use non-rechargeable batteries in your handset – they may explode,

causing damage.

If the fault persists...

The store where you bought your telephone can also provide you with

information and after - sales support.

CONFORMITY

This unit conforms to the following rules and regulations: 1995/5/EC

Radio frequency and telecommunication equipment and the mutual

acceptance of conformity. The CE mark proves the above.

ENVIRONMENT

This symbol means that your inoperative electronic

appliance must be collected European Union has

implemented a specific collection and recycling system for

which producers are

responsible.

This appliance has been

designed and manufactured with high quality materials and

components that can be recycled and reused. Electrical and electronic

appliances are liable to contain parts that are necessary in order for the

system to work properly but which can become a health and

environmental hazard if they are not handled or disposed of in the

proper way. Consequently, please do not throw out your inoperative

appliance with the household waste.If you are the owner of the

appliance, you must deposit it at the appropriate local collection point

or leave it with the vendor when buying a new appliance.- If you are a

professional user, please follow your supplier's instructions.- If the

appliance is rented to you or left in your care, please contact your

service provider.Keen to preserve the environment, ATLINKS has

equipped this appliance with a switching power supply, offering better

energy efficiency. The advantages include not only very low electricity

consumption, but also a more compact format than the conventional

power supply units used by the previous range.The used batteries from

your telephone (if it has batteries) must be disposed of in compliance

with current environmental protection regulations.Comply with your

local regulations. Return your batteries to your reseller or dispose of

them at an approved recycling centre.

Help us protect the environment in which we live!

The Manufacturer reserves the right to modify the specifications of

its products in order to make technical improvements or comply

with new regulations.ALCATEL and ATLINKS are registered

trademarks.The Alcatel logo and Alcatel name are trademarks of

Alcatel-Lucent and used under licence by ATLINKS.

www.alcatel-home.com

ATLINKS Europe

22 quai Gallieni

92150 Suresnes - France

Model: E130 / E130 Duo / Trio

E190 / E190 Duo / Trio

A/W No. : 10000962 Rev.2 ( EN )

Made in PRC

Product specificaties

Merk:	Alcatel
Categorie:	Telefoon
Model:	E190 Voice Duo
Kleur van het product:	White,Grey
Ingebouwd display:	Ja
Soort:	DECT-telefoon
LED-indicatoren:	Ja
Capaciteit van de accu/batterij:	300 mAh
Touchscreen:	Nee
Montagewijze:	Bureau
Meegeleverde kabels:	AC
Microfoon mute:	Ja
Luidspreker:	Ja
Nummerherkenning:	Ja
Conferentiegesprek mogelijk:	Ja
Ondersteund aantal accu's/batterijen:	2
Volumeregeling:	Digitaal
Beeldscherm, aantal kleuren:	Monochroom
Stille modus:	Ja
Inclusief basisstation:	Ja
Aansluiting voor netstroomadapter:	Ja
Batterij bijna leeg-indicatie:	Ja
Wekker:	Ja
Standby tijd:	10 uur
Backlight-kleur:	Blauw
Intercom:	Ja
Aantal melodieën:	10
Gesprekstijd:	100 uur
Capaciteit telefoonboek:	50 entries
Opnieuw bellen:	Ja
Capaciteit nummerherhalingslijst:	5
Afmetingen basisstation:	82 x 66 x 82 mm
Aantal handsets inclusief:	2
Navigatietoets:	Ja
Draadloze verbindingen:	Ja
Pager functie:	Ja
Maximum indoorbereik:	50 m
Maximum outdoorbereik:	300 m
Antwoordapparaat:	Ja
Aantal handsets mogelijk:	4
Opnametijd:	15 min
Aantal items in belgeschiedenis:	10
Afmetingen handset (BxDxH):	46 x 27 x 151 mm
Geïntegreerde antenne:	Ja
Plaats toetsen:	Handset
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Batterijtechnologie:	Nikkel-Metaalhydride (NiMH)
Type batterij:	AAA
Display met achtergrondverlichting:	Ja