ALC Connect AHSS31 Handleiding

ALC Bewegingsdetector Connect AHSS31

Lees hieronder de 📖 handleiding in het Nederlandse voor ALC Connect AHSS31 (3 pagina's) in de categorie Bewegingsdetector. Deze handleiding was nuttig voor 60 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
QUICK START GUIDE
Motion Detector
Please read these instructions completely
before operating this product.
Model: AHSS31
Compatible with ALC AHS613, AHS616, and
AHS629 Security Systems
u When first turning on the app you will enter the Control Hub (or
System Name you gave) Selection window. Simply tap your
Control Hub to enter.
v
The Status screen will appear. Here you can control the
connected devices as well as access the Scenario, Event and
Setting’s screens.
SCAN
TO VIEW
COMPLETE
USER’S GUIDE
For detailed installation and setup and to view the ALC 1 Year
Limited Warranty, please refer to the complete Connect Series
User’s Guide available on our website:
www.ALCWireless.com/support
For rst time use, batteries are pre-installed (3 AA batteries 3).
Apply the double-sided tape to the rear of the Motion Detector as
shown. Use the thick tape for î™­at wall mount or the thin table for
corner mounting. Select a location between 2-2.5 meters (6-8 ft)
from the î™­oor.
6 to 8 feet
50 feet
110 degree de ion angl s tect e
IMPORTANT: This device needs to be paired with the Control
Hub as follows.
u Since this device is an added accessory, you should have
downloaded the Connect App and installed the ALC Control
Hub as described in the Connect Series owner’s manual.
v At the Status screen, tap .+
w Remove the insulating plastic tab then
open the detector by pressing the tab
at the bottom. Press the Pair button.
x Tap Motion Detector Pair. Tap and
follow the on screen instructions.
At the final screen, enter the Motion
Detector’s name and location and tap
Save.
This Motion Detector is an accessory to be used along with the
Connect series Control Hub Kit. Please refer to this quick start
guide as well as the Connect series owner’s manual, see back
cover for details.
Trouble Pairing?
If it did not detect the
detector, remove the
battery for 5 seconds
and press the Pair button
again. Repeat step 4.


Product specificaties

Merk: ALC
Categorie: Bewegingsdetector
Model: Connect AHSS31

Heb je hulp nodig?

Als je hulp nodig hebt met ALC Connect AHSS31 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewegingsdetector ALC

Handleiding Bewegingsdetector

Nieuwste handleidingen voor Bewegingsdetector

Lucide

Lucide Eclips Handleiding

20 November 2024
Megatron

Megatron MT68030 Handleiding

19 November 2024
Megatron

Megatron MT68032 Handleiding

19 November 2024
D-Link

D-Link DCH-S150 Handleiding

16 November 2024
Hager

Hager TXD503 Handleiding

16 November 2024
Maxsa

Maxsa 40234 Handleiding

11 September 2024
Maxsa

Maxsa 43218 Handleiding

11 September 2024
ORNO

ORNO OR-CR-233 Handleiding

9 September 2024