Akyga AK-BC-02 Handleiding

Akyga Batterij-oplader AK-BC-02

Lees hieronder de 📖 handleiding in het Nederlandse voor Akyga AK-BC-02 (4 pagina's) in de categorie Batterij-oplader. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

AK-BC-02 - user manual

/ak-bc-02

www.akyga.com

>80%

Short description of the product

The product is compatible with the applicable national and European requirements.

What is in the box?

- AK-BC-02 battery charger

- Power cord

S explanation:ymbols

There is a risk of losing health or life (e.g. by electic shock).

There is a particular danger connected with service.

Important tips and information.

Product accordance with the EU directive 2002/96/EC. The symbol of the crossed out basket

placed on the product means that the marked product can not be disposed of with other

household waste. After use, the product must be return to collection point for used electical and

electronic equipment or to the seller. Appropriate segregation of rubbish for subsequent

processing, recovery or descrution contributes to avoiding negative effects on the environment

and health, and also allows the recovery of raw materials from which the product is made.

p. 1

The CE standard description on the product is the manufacturer's declaration that the marked

product meets the requirements of the directive so-called The "New Approach" of the European

Union (EU). For security and certification (CE) reasons, the device can not be rebuild or change in

any way. In the reason of using the power supply for other purposes than those described, the

product may be demaged. The incorrect use may also cause hazard such as short-circuits,

burns, electric shocks, etc. Read the users manual carefully and keep it for later use. The product

could be share to third partie only with the user manual included.

The Akyga® AK-BC-02 battery charger is used to simultaneous charging up to 8 batteries in pairs of two

cells The battery charger is compatible with Ni-MH AA (R6) and AAA (R03) batteries. It has

multifunctional LCD display which shows the status of each battery separately and warns about placing

the batteries in wrong polarity. It has also a set of protectors OVP, OTP, OPP, SCP, OCP and additional

safeguards to protect against: improper placement of the battery in the charger, overcharging of the

battery, overheating of the cells (60°C), placement of damaged or incorrect cells and effects of short-

circuit and overload.

The product is adapted to supply voltage in the range of 100-240V, 50/60Hz.

The power consumption of charging battery can not exceed the charger nominal current.

BOX

Ecological Solutions

GREEN

battery charger

The RoHS mark on the product is the manufacturer's declaration that the marked product meets

the requirements of the EU Restriction of Hazardous Substances (2002/95/EC) directive, which

aims to reduce the amount of hazardous substances penetrating into the environment from

electrical and electronic waste.

AK-BC-02 - user manual

p. 2

Safety Precautions

WARNING! Product heats up during operation. To reduce the risk of burns or overheating the power

supply, do not place it in restricted ventilation area. Also, do not allow the working charger to touch soft

surface such as pillows, blankets or clothing. The battery charger meets the limits on the surface

temperatures available to the user, as defined in the International Standard for Safety of Information

Technology Equipment (IEC 60950).

An electrostatic discharge occurs when two object touch each other, for example, an electric

charge that occurs when user touch metal door handle after walking on a carpet . Discharging

electrostatic charges from fingers or other electrostatic conductors can damage electronic

components. To avoid damaging the batteries, abstain from touching electrical outlets, wires and

electonic circuits. The user’s contact with electronic components should be kept to a minimum.

The II protection class device. It provides protection against electric shock against direct and

indirect contact, and thanks to the additional isolation it is not necessary to connect the device

case with the protective earth conductor.

The device is intended only for domestic use, indoors.

The manufacturer of the product is not responsible for damage or insults caused in effect

of disobey the safety instructions and informations contained in these user manual.

źKeep the product and the packaging out of range of children and animals. The package

includes a foil that child could choke while playing.

źIt is forbidden to apply the mechanical load to the product - strong shocks, impacts, dropping or

crushing may cause its damage.

źThe product operation in adverse conditions is not allowed. Adverse conditions are primarily:

exposure to direct sunlight, high or very low ambient temperatures, strong vibrations, high

humidity, surrounds of gases, dusts or flammable and aggressive liquids.

źIf the product has been damaged, does not work properly or has been stored for a long period

of time in bad or unfavorable conditions, safe operation of the device is not possible. It is

essential to stop using the product and to protect it against re-use for security purposes.

źProduct and power cord should not be touched with moist or wet hands under no

circumstances.

źShort-circuiting the current connection is prohibited.

źMake sure that the power cord is not crushed, bent, twisted, rubbed against sharp edges or

mechanically loaded in any other way. Avoid thermal load of the cable - in particular keep away

from heat sources (such as stoves, radiators, fireplaces).

źPower cords should be laid in such a way as to eliminate the risk of stumbling or hooking over.

źIt is forbidden to modify the power cord. In the case of modifications, the cable may be

damaged, causing threats to life, health and property.

źIt is forbidden to charge other types of batteries than AA/AAA, because it can cause explosion,

electric shock and personal injury.

źThe cells must be charge in pairs.

źBefore connecting the charger to the mains socket, make sure that the voltage specified on the

charger matches voltage supplied to the household socket.

źConnection of the charger to electricity is done by connecting added cable with the IEC C7 plug

to charger with IEC C8 connector and then connecting appropriate plug to grounded electrical

outlet.

źMains plug should be disconnect from power socket if the product is not in use for a long time.

battery charger

AK-BC-02 - user manual

p. 3

źWhen disconnecting the power cord from the socket and from the device, do not pull on the

cord, but only on the part of the cable plug provided for this purpose.

źShort-circuiting the current connection is prohibited.

źIn case of any doubts regarding operation, safety or connection of the product, please contact

the manufacturer or a qualified specialist for this purpose.

źAll maintenance, adjustment and repair work on the product may only be carried out by a

qualified person in a specialist facility.

Problem

Cause

Solution

A cell connected to an

electrical outlet via

charger does not charge

No mains voltage

źCheck the correct connection of

the charger to the mains socket

źCheck the mains fuses

The battery charger is

overloaded

źDisconnect the charger from the

power network, heck the

correctness of the current

parameters

Incorrect placement of

the cell in the charger

źPlace the cell according to the

polarity marked on the charger

There is a suspicion of a

product defect

źStop using and contact the

seller

Removing the most common problems

battery charger

1. Connect the charger via added power cord to the electrical outlet.

2. Place the cells in the battery charger in pairs.

3. Make sure that the cells are correct placed in the charger.

4. The LED diodes signals that the battery has been charged (charging process - shines bright

red color, after charging - shines pale red color).

5. After charging the cells, disconnect the charger from the mains socket, then remove the

cells.

Preparing the Battery Charger for Use:

Cleaning the power supply

źUse soft and antistatic cloth for cleaning the battery charger.

źDo not use abrasive or chemical cleaners.

Disconect the power supply from the electrical socket and connected devices before cleaning.

Product specificaties

Merk:	Akyga
Categorie:	Batterij-oplader
Model:	AK-BC-02
Kleur van het product:	Black, Grey
Ingebouwd display:	Nee
Gewicht:	164.3 g
Breedte:	90 mm
Diepte:	173 mm
Hoogte:	29 mm
Snoerlengte:	0.5 m
Gewicht verpakking:	246.2 g
Breedte verpakking:	140 mm
Diepte verpakking:	245 mm
Hoogte verpakking:	46 mm
Materiaal behuizing:	ABS kunststof
LED-indicatoren:	Charging, Ready
Type stroombron:	DC
Ondersteund aantal accu's/batterijen:	8
Geschikt voor:	Huishoudelijke batterij
Duurzaamheidscertificaten:	RoHS
Aantal per verpakking:	1 stuk(s)
Ingangsspanning:	110 - 240 V
Oplaadspanning:	2.4 V
Stroomspanning bescherming:	Over voltage, Overheating, Overload, Short circuit
Frequentie:	50 - 60 Hz
Compatibele producten:	CE, FCC, REACH
Compatibele batterij technologiën:	Nikkel-Metaalhydride (NiMH)
Compatibele batterij grootte:	AA, AAA
Bedrijfstemperatuur (T-T):	0 - 35 °C
Batterijen inbegrepen:	Nee
Batterijtechnologie:	Nikkel-Metaalhydride (NiMH)
Omgekeerde polariteit circuit beveiliging:	Ja
Batterijformaat:	AA
Formaat batterij 2:	AAA