Advantech EKI-2701MPI-AE Handleiding

Advantech Splitter EKI-2701MPI-AE

Lees hieronder de 📖 handleiding in het Nederlandse voor Advantech EKI-2701MPI-AE (2 pagina's) in de categorie Splitter. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
1 Startup Manual
Overview
EKI-2701MPI is new generation which compliant
IEEE 802.3af/at/bt. The high-power PoE standard
boosts the power budget of each port to 60W or even
90W with PD device.
With the technology of PoE (Power over Ethernet),
both data and electrical power to Ethernet-enabled
devices are using a standard CAT5 cable. The
EKI-2701MPI BT PoE solution use the same cabling
standard with IEEE 802.3af/at. Which instead of
delivering power over to 4-pair twisted UTP with a
maximum of up to 90 watts of power over Ethernet
cable.
Packing List
Before installation, please make sure that you have
received the following:




1 x EKI-2701MPI or EKI-2701MPI- injector PS




1 x 130W 56V Power Supply (EKI-2701MPI- PS)




1 x Din-Rail, 1 x Wall-mount kit
If anything is missing or damaged, contact your
distributor or sales representative immediately.
Datasheet
For more detailed information, please refer to the full
manual which can be found on the Advantech’s
website.
Notes
For more information on this and other Advantech
products, please visit our websites at:
http://www.advantech.com/products
For technical support and service:
http://www.advantech.com/support/
This startup manual is for EKI-2701MPI &
EKI-2701MPI-PS
1st Edition
Nov. 2018
Specications
General




Compatibility: IEEE 802.3, 802.3u, 802.3x,
802.3af/at/bt, 802.3ab




LAN: 10/100/1000Base-T (X)




Transmission Distance: Up to 100 m




Transmission Speed: Up to 1000Mbps




Connectors:
- 1 x RJ45 W/ Data- in
- 1 x RJ45 W/ PoE-out




LED Indicators: PoE, SYS




Power
:
:
:
::
- Power Consumption Max. 95 W (Full load PoE)
- Power Input 55~57 VDC (Single input)
- Power Output 90W
- Connectors 6P Pluggable Terminal Block,
DC Jack




Dimensions (W x H x D):
84 x 80 x 25mm (3.307" x 3.15" x 0.984")




Enclosure: IP40




Operating Temperature:
- EKI-2701MPI: - -75°C (-40~167°F) 40
- EKI-2701MPI-PS: 0 ~ 40°C (32 ~ 104°F)




Storage Temperature: -40 ~ 85°C (-40 ~ 185°F)




Humidity: 10 ~ 95% (non-condensing)




EMC: CE, FCC




Warranty: 2 years
Overview
DIP Switch Power Connection
The EKI-2701MPI injector supports dual power
inputs
1. Insert the positive and negative wires into the V+
and V- contacts on the terminal block connector.
2. Tighten the wire-clamps screws to prevent the DC
wires coming loose.
Startup Manual 2

Product specificaties

Merk: Advantech
Categorie: Splitter
Model: EKI-2701MPI-AE

Heb je hulp nodig?

Als je hulp nodig hebt met Advantech EKI-2701MPI-AE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Splitter Advantech

Advantech

Advantech EKI-2701MPI-AE Handleiding

13 November 2024
Advantech

Advantech EKI-2701HPI-AE Handleiding

13 November 2024

Handleiding Splitter

Nieuwste handleidingen voor Splitter

Smart-AVI

Smart-AVI VS2P Handleiding

21 December 2024
Smart-AVI

Smart-AVI VS4P Handleiding

21 December 2024
Smart-AVI

Smart-AVI DVS-8P Handleiding

9 December 2024
Smart-AVI

Smart-AVI DVS4P Handleiding

9 December 2024
Smart-AVI

Smart-AVI DVS-400 Handleiding

9 December 2024
Audio-Technica

Audio-Technica ATW-SC410 Handleiding

6 December 2024
Audio-Technica

Audio-Technica AT-SL914HD Handleiding

6 December 2024
Digitus

Digitus DS-46304 Handleiding

1 December 2024
Radial Engineering

Radial Engineering HotShot DM1 Handleiding

25 November 2024
Radial Engineering

Radial Engineering ProMS2 Handleiding

25 November 2024