Advantech AIMB-228 Handleiding
Advantech
Moederbord
AIMB-228
Lees hieronder de 📖 handleiding in het Nederlandse voor Advantech AIMB-228 (6 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
AIMB-228 Startup Manual 1
Before you begin installing your card, please make sure that
the following items have been shipped:
1. AIMB-228 AMD V-series/R-series Mini- ITX mother-
board
2. SATA HDD cable x 1
3. SATA power cable x 1
4. Serial port cable (1 to 1) x 2
5. I/O port bracket x 1
6. Startup manual x 1
7. Warranty card x 1
8. CPU Cooler x1
If any of these items are missing or damaged, please con-
tact your distributor or sales representative immediately.
AIMB-228 AMD V1000/R1000 Mini-ITX with 4DP,
6 x USB, 6 x COM, and Dual LAN
Startup Manual
Standard SBC Functions
• CPU: AMD V-series SOC V1807B QC 3.35GHz &
V1605B QC 2.0GHz & V1202B DC 2.3GHz, R-Series
R1606G TC 2.6GHz & R1505G TC 2.4GHz
• BIOS: AMI 128-Mbit SPI
• System memory: Up to 32 GB; 260-pin SODIMM x
2,dual channel DDR4 2400/2666/3200 MHz SDRAM
• SATA Interface: Two onboard Serial ATA connectors and
data transfers up to 600 MB/s, and one onboard
• Serial ports: Six serial ports; COM1 support 5V/12V,
COM2 COM5 is RS-232/422/485, COM3 support CCTalk,
COM4 support TTL, COM6 is RS-232
• Watchdog timer: 1~255 level timer intervals
• USB: Supports up to two USB 3.1 and two USB 2.0 ports,
and 2 USB 2.0 onboard pin headers
• GPIO: 16-bit general purpose Input/Output
Graphic Interface
• Controller: AMD Vega GPU with up to 11 compute units
• LVDS: supports dual channel 48-bit up to 1920 x 1200
colay 1st DP port (Optional)
• DP: Supports DP++, resolution up to 4096 x 2160 @
60Hz
Ethernet Interface
• Connector: RJ-45 x 2
• LAN1: 10/100/1000 Mbps GbE Realtek 8111G
• LAN2: 10/100/1000 Mbps GbE Realtek 8111G
Mechanical and Environmental
• Dimensions (L x W): 170 mm x 170 mm (6.69” x 6.69”)
• Power supply voltage: 3.3V, 5V, 12V
• Power requirements:
Wide Voltage 12~24V DC input; or AT/ATX via jumper
• Operating temperature: 0 ~ 60 °C (32 ~ 140 °F)
• Weight: 0.228 kg (weight of board)
Specications
Packing List
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://support.advantech.com/
This manual is for the AIMB-228 series Rev.A1.
Part No. 2046022800
Printed in China
1st Edition,
June 2019
2 AIMB-228 Startup Manual
The board has a number of connectors and jumpers that
help congure the system to suit your application require-
ments. The tables below list the function of each of the
connectors and jumpers.
Connector / Header List
Description Part Reference
1ATX 12V power supply con-
nector ATX12V1
2 DC input Jack DCIN1
3
DisplayPort #1(Up) + Display-
Port #2(Down) Stack
connector
DP1+DP2
4
DisplayPort #3(Up) + Display-
Port #4(Down) Stack
connector
DP3+DP4
5 USB23USB3.1 GEN2 Stack connector
6Serial ATA interface connec-
tor #1 SATA1
7 USB2.0 Stack connector USB14
8 5VSB input connector ATX_5VSB1
9 AT/ATX Mode selection PSON1
10 Dual port RJ45 Connector LAN1+LAN2
11 Audio amplier output pin
header AMP1
12 HD Audio Interface (LINE-
OUT) AUDIO1
13 HD Audio Interface (MIC-IN) AUDIO2
14 Front panel audio header FPAUD1
15 Coin Battery wafer box BAT1
16 Serial ATA interface connec-
tor #2 SATA2
17 HD Audio interface (Digital) SPDIF1
18 LVDS VESA, JEIDA format
selection pin header JLVDS_VCON1
19 M.2 KEY-B connector NGFF_B1
20 Low Voltage Differential
Signaling LVDS1
21 Nano SIM Card holder SIM1
22 PCI Express x16 slot PCIEX16_1
23 USB2.0 Front panel Header USB56
24 CPU FAN #1 connector CPUFAN1
25 USB Power selection for
USB12 / USB34 / USB56 JUSBPWR1
26 M.2 KEY-E connector NGFF_E1
27 COM2 Box Header SATA1
Jumpers and Connectors
28 COM1 RI# selection pin
header JSETCOM1_V1
29 Inverter power connector INV1
30 16-bits General Purpose I/O
Pin Header GPIO1
31 PS2 Keyboard & Mouse con-
nector KBMS1
32 COM4 RI# selection pin
header JSETCOM4_V1
33 CCTALK Voltage selection pin
header JCCT_VCON1
34 COM3 ~ COM6 Box Header COM3456
35 COM1 Box Header COM1
36 Low pin count interface con-
nector LPC1
37 Serial ATA Power connector #1 SATA_PWR1
38 Serial ATA Power connector #2 SATA_PWR2
39 DDR4 SO-DIMM Socket CH-A DIMMA1
40 DDR4 SO-DIMM Socket CH-B DIMMB1
41 Power LED and keyboard lock
pin header JFP2
42 Watch Dog timer output and
OBS beep JWDT1+JOBS1
43 Case Open connector JCASE1
44
PWRBTN#/ RESET#/HDD
LED/ Serial bus from HW
monitor IC/Internal Buzzer /
External Speaker header
JFP1
45 System Fan #2 connector SYSFAN2
46 System Fan #1 connector SYSFAN1
47 SPI Pin Header SPI1_CN1
48 SPI BIOS Flash Socket SPI1
49 VDD select for LVDS1 Panel JLVDS1
50 COMS Mode selection JCMOS1
Jumpers and Connectors (Cont.)
AIMB-228 Startup Manual 3
Jumper Setting List
Description Part Reference
1USB Power selection for
USB12 / USB34 / USB56 JUSBPWR1
2 VDD select for LVDS1 Panel JLVDS1
3 CMOS clear JCOMS1
4 COM1_RI# Pin Selection JSETCOM1_V1
5 COM4_RI# Pin Selection JSETCOM4_V1
6 CCTALK selection pin header JCCT_VCON1
7 AT / ATX Mode selection PSON1
8
PWRBTN# / RESET# / HDD
LED / Serial bus / Internal
Buzzer / External Speaker
header
JFP1
9Watch Dog Timer output and
OBS Beep JWDT1+JOBS1
USB Power selection for USB12 / USB34 / USB56
(JUSBPWR1)
Function Setting
Set USB VBUS as +5VSB
(Default)
Set USB VBUS as +5V
VDD select for LVDS1 Panel (JLVDS1)
Function Setting
Jumper position for +3.3V
(Default)
Jumper position for +5V
Jumper position for +12V
CMOS clear (JCOMS1)
Function Setting
Normal
(Default)
Clear CMOS Data
Jumpers and Connectors (Cont.)
COM1_RI# Pin Selection (JSETCOM1_V1)
Function Setting
Jumper position for RI#
(Default)
Jumper position for +5V
Jumper position for +12V
COM4_RI# Pin Selection (JSETCOM4_V1)
Function Setting
Jumper position for RI#
(Default)
Jumper position for +5V
Jumper position for +12V
CCTALK selection pin header (JCCT_VCON1)
Function Setting
CCTALK 12V (Default)
CCTALK 5V
Jumpers and Connectors (Cont.)
Product specificaties
| Merk: | Advantech |
| Categorie: | Moederbord |
| Model: | AIMB-228 |
Heb je hulp nodig?
Als je hulp nodig hebt met Advantech AIMB-228 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Advantech
14 November 2024
13 November 2024
8 November 2024
8 November 2024
8 November 2024
8 November 2024
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord Supermicro
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
18 November 2024
16 November 2024
16 November 2024
15 November 2024
12 November 2024
26 September 2024
11 September 2024
11 September 2024
11 September 2024
11 September 2024