ADDAC System ADDAC402B Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor ADDAC System ADDAC402B (9 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
ADDAC402 EXPANSION MIDI GUIDE
January.2017Revision.01
INTRODUCTION
ADDAC402B MIDI Expansion allows full I/O Midi control of ADDAC402 plus access to a powerfull midi inter-
face, with:
Midi Sync:
Allows the module to synchronize with any external MIDI device’s Clock, including transport messages like
play, stop and continue.
CV to MIDI:
5 CV inputs (Fills 1 to 4 and Assign) to MIDI Notes and/or CC messages, the Note and CC number can be
independently configured via the Configuration Menu.
These CV inputs can be sent on independent MIDI Channels, for ex: Fills 1 to 4 on MIDI Channel 1 and Assign
on MIDI Channel 2.
MIDI Controller:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be sent to MIDI Out as CC controls
making it work just like any standard MIDI controller. The individual CC numbers can be configured through
the Configuration Menu.
MIDI to Gate:
All 4 Gate outputs can be controlled/sequenced from an external MIDI device.
For ex: we can configure Gate 1 to be responsive to CC 1, Gate 2 to CC 2 and so on. Everytime CC 1 gets a
value of 127 Gate 1 will be turned ON, if it gets a 0 value Gate 1 will be turned OFF.
MIDI Control:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be controlled/sequenced from MIDI
CC controls. This allow full automation of the module via MIDI.
The individual CC numbers can be configured through the Configuration Menu and includes a midi learn
feature for easier configuration.
Also controllable via MIDI is the change of Presets and Modes.
ADDAC SYSTEM page 2
MENU Description
MENU Operation
For any MIDI Configuration the user must get into the CONFIG Menu, this is done by pressing the MODE INFO /
CONFIG push button for 3 seconds, after this the screen will show the first Menu Page:
CONFIG + ASSIGNS:
In this page the user accesses several diferent settings of the 402 and can also Assign the Swing/Assign
input to any parameter.
MIDI GENERAL CONFIG:
This page features most general MIDI settings
MIDI IN CONFIG:
This pages features all settings related with incoming MIDI messages
MIDI OUT CONFIG:
This pages features all settings related with outgoing MIDI messages
Once in the first page the user can use the PRESET MENU / SCROLL Knob to scroll among the Menu options.
Pressing the MODE INFO / CONFIG Button will enter the selected secondary Menu page.
Pressing it once again will Exit the secondary Menu page back to the First page.
Once inside a secondary page the user can scroll its items with the PRESET MENU / SCROLL Knob.
To change a parameter the user can use the Skip Step 3 / MENU -- button to decrease the current value or
use the Skip Step 4 / MENU ++ button to increase the current value. It’s also possible to use the Steps 4 / Set
Value Knob for faster changes.
MIDI Learn:
While inside a secondary menu, the user can also press the Reset 4 / MIDI Learn push button and while
keeping it pressed send a CC message to the 402 MIDI IN. The module will then detect the message and set
the current selected value to the incoming CC number.
MIDI OUT CONFIG
MIDI GENERAL CONFIG
MIDI IN CONFIG
CONFIG + ASSIGNS
Only available with 402B expansion plugged in
Always available
ADDAC402 EXPANSION MIDI GUIDE
January.2017Revision.01
ADDAC SYSTEM page 3


Product specificaties

Merk: ADDAC System
Categorie: Niet gecategoriseerd
Model: ADDAC402B

Heb je hulp nodig?

Als je hulp nodig hebt met ADDAC System ADDAC402B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd ADDAC System

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd