A-Designs Hammer 2 Handleiding

A-Designs Niet gecategoriseerd Hammer 2

Lees hieronder de đź“– handleiding in het Nederlandse voor A-Designs Hammer 2 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
HAMMER 2 EQ™
Owner’s Manual
W
ARNING!
Before you start your new HAMMER EQ please read the following:-
ANY real tube product is sensitive to a high SPL environment. This may cause microphonics in a recording situation. Make sure you are able to shock
mount and or place the unit in isolation if need be. Direct light will also affect tubes as well.
PLEASE be sure to have at least one rack space between any tube products from the product above and below the unit. This will ensure your tube unit
will not over heat. Over heating will cause damage to the tubes and shorten their life span. If possible, place the HAMMER unit in the top rack space to
allow air flow.
If you have received your unit via UPS/Fed-Ex/DHL, or any other courier, your HAMMER should have been double boxed for protection. If it was not
double boxed, please contact your dealer and return the unit to them for a replacement.
W e demand ALL our units to be double boxed to help prevent damages during shipping.
Thank you,
Peter Montessi
President
A Designs Audio
LEGAL
NOTICE:
Fill out and Return Warranty Card to A Designs. Warranty begins the day of purchase. Your name will be placed on our mailing list (unless otherwise
requested) for future updates and new product announcements.
A Designs reserves the right to make improvements or changes at any time to this product.
Published by: A Designs Audio
P.O. Box 4255
W est Hills, CA 91304 U.S.A. Edition 1.0 2004
Copyright 2013 A Designs Audio, All Rights Reserved.
WARNING: W VRemoving Cover ill oid Your W
arranty
.
1 Year Limited arranty Internal Parts, 30W -Day Limited Warranty Labor, 30- WDay Limited arranty Tubes
A Designs warrants that our hardware conforms substantially to the specifications contained in this manual when used in accordance these
specifications for a period of 1 year from the date of original purchase from A Designs or its authorized dealers. In case of a valid warranty claim, your
sole and exclusive remedy and A Designs’ entire liability under any theory of liability will be, at its option, to repair or replace the product without charge,
or, if not possible, to refund the purchase price to you. The warranty is not transferable and applies only to the original purchaser of the product.
For warranty service, contact A Designs Audio at 818- -716 4153 to obtain a Return Merchandise Authorization (RMA) number. After obtaining the RMA
number, ship defective product to A Designs Audio, P.O. Box 4255, W est Hills, CA 91304. W rite RMA number on outside of shipping box. Be sure to
include your name, address, phone number, copy of original sales invoice and detailed description of the problem. A Designs Audio will not accept
responsibility for loss or damage in shipping.
Warranty is void if product serial numbers have been removed or if the product has been damaged by abuse or unauthorized modification and repair.
There are no user serviceable parts inside.
THIS WARRANTY IS IN LIEU OF ALL WARRANTIES WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. A DESIGNS AUDIO MAKES
NO OTHER WARRANTY EITHER EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY ARRANTIES OF MERCHANT WIMPLIED
ABILITY, UNLESS FOR A PAR - TICULAR PURPOSE OR NON INFRINGEMENT. PURCHASERS SOLE AND EXCLUSIVE REMEDY UNDER THIS
W ARRANTY SHALL BE RE PAIR OR REPLACEMENT AS SPECIFIED HEREIN.
IN NO EVENT WILL A DESIGNS AUDIO BE LIABLE FOR ANY TDIREC , INDIRECT, SPECIAL, INCREMENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM ANY TDEFECT IN THE PRODUC , INCLUDING LOST T RPROFITS, DAMAGE O PROPE TY AND, TO THE EXTENT PERMITTED
BY LAW, DAMAGE FOR PERSONAL INJURY, EVEN IF A DESIGNS AUDIO HAS BEEN ADVISED OF THE POSSIBILITIES OF SUCH DAMAGES.
A Designs, A Designs Audio, HAMMER 2EQ A is a trademark of Designs. All other trademarks are the property of their respective owners.
Introduction
Owner’ s Manual
|
3
H 2-ammer EQ
™
Welcome to the Analog Sound of the HAMMER EQ. 2- This is an all tube product, and there are some basics you should
come to understand before using this product for the first time.
Tubes are a component that have specialized and unique features. If you are a “pre” or baby boomer, born before 1957,
you may recall using tubes in various products, such as radios, amplifiers, and televisions. So, this is just to refresh your
memory. If you are a “post” baby boomer, this could be your first experience with tubes, so please pay close attention!
(You will be tested at the end of this manual).
Tubes are most efficient and ef fective when “warmed up.” This means, upon starting the HAMMER 2-EQ, you should
allow the tubes to become fully heated before attempting to operate. The minimum amount of warm up time is
approximately 15 to 20 minutes.
Set up your instrumentation layout before powering up the HAMMER EQ. Plug in your instrument or microphone while the 2-
unit is of f. This will prevent unwanted noise such as “ The same applies when you shut down.pops.” Allow a minimum of
25 seconds for the power to drain from the tubes properly. Then you can unplug your instrument or microphone.
Placing the HAMMER EQ in a rack, we recommend using the first tier or allow one 2- x space in order to properly
ventilate. void overheating!A Too much heat will reduce the life e also recommend strongly that - Wspan of your tubes.
you observe SPL and shock mount any tube product.
A Designs Audio has scoured the earth for the perfect combination of tubes for this unique quality sound. Go ahead, get
started. Read the following pages carefully to become acquainted with the warmth and clarity that the HAMMER-EQ can
deliver to your recordings.
Please feel free to email A Designs via the website with any creative applications for the use of the HAMMER 2- WeEQ.
have included some applications in this manual. e may just include your suggestion on our website! W
Congratulations on the purchase of your HAMMER 2-EQ! Most of all have fun.
Peter Montessi, President
A Designs Audio Inc.

Product specificaties

Merk: A-Designs
Categorie: Niet gecategoriseerd
Model: Hammer 2

Heb je hulp nodig?

Als je hulp nodig hebt met A-Designs Hammer 2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd A-Designs

A-Designs

A-Designs Hammer 2 Handleiding

14 Januari 2025
A-Designs

A-Designs Pacifica Handleiding

14 Januari 2025
A-Designs

A-Designs HM2 Nail Handleiding

14 Januari 2025
A-Designs

A-Designs MP-2A Handleiding

23 Augustus 2024
A-Designs

A-Designs REDDI Handleiding

23 Augustus 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Tripp Lite

Tripp Lite SmartRack SRIN4101010 Handleiding

14 Januari 2025
Cuisinart

Cuisinart SP-4 Handleiding

14 Januari 2025
EBERLE

EBERLE WU1 Handleiding

14 Januari 2025
Hamlet

Hamlet HUSB420 Handleiding

14 Januari 2025
Hamlet

Hamlet HUSCR30 Handleiding

14 Januari 2025
Hamlet

Hamlet HUSCR-ACY Handleiding

14 Januari 2025
Exagerate

Exagerate XMHL100 Handleiding

14 Januari 2025
Hamlet

Hamlet HURTAG1356 Handleiding

14 Januari 2025
Hamlet

Hamlet HUSCR-NFC Handleiding

14 Januari 2025
Hamlet

Hamlet HUSCR311C Handleiding

14 Januari 2025