4ms Sampler Handleiding

4ms Niet gecategoriseerd Sampler

Lees hieronder de 📖 handleiding in het Nederlandse voor 4ms Sampler (20 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20

Sampler

4ms Company

User Manual 1.0 – June 13, 2023

for f irmware v1.0

The Sampler is a high fidelity, two-channel stereo audio recorder and playback module. The can record Sampler

and play back high quality stereo WAV files. A maximum of 600 samples can be loaded at one time from the

removable microSD card, in a variety of formats up to 96kHz/32-bit/stereo WAV. All sample parameters (pitch,

sample file selection, length, bank, and start position) are CV controllable, and trigger jacks for play/record, and

reverse allow for synchronization.

•Stereo playback channels can play any of 600 samples"

•Recording creates stereo WAV files directly onto microSD Card for immediate use"

•Extremely low noise, high fidelity design"

•Plays a variety of WAV files up to 32-bit/96kHz"

•Records at 24-bit or 16-bit/48kHz (future firmware will support up to 96kHz)"

•Intelligent file system makes loading large sample libraries easy by organizing banks into folders"

•CV and controls for 1V/oct tracking, Start Position, Length, Sample selection, Bank, Reverse and

Play/Record"

•Includes microSD card with Sample Pack and SD Card adaptor"

1 10

2 9

3 8

4 7

5 6

All

Play

SamplePitch

Pitch

Right Bank

Out Right End Out Reverse

Sample

LengthStart Pos.

Out Left

LengthStart Pos.

ReverseBank

Play/RecLeft

RECORD

SAMPLER

Table of Contents

Setting up your Sampler# "........................................................................................3

Overview# "................................................................................................................3

Electrical and Mechanical Specifications# "..............................................................4

Tutorial 1: Basic Playback# "......................................................................................5

Tutorial 2: Navigating Banks# "..................................................................................7

Quick Bank Select# "...........................................................................................7

Channel Playback Volume# ".....................................................................................8

Stereo/Mono Mode# "................................................................................................8

Tutorial 3: Recording Samples# "...............................................................................8

Enabling Recording# "..........................................................................................8

Start/Stop Recording# ".......................................................................................9

Where is my recording?# "...................................................................................9

Tutorial 4: Loading Files onto the microSD Card# "...................................................9

Create a bank by copying a folder of WAV files# ".............................................10

Folders with color names# "...............................................................................11

Automatic loading of new/moved files# "...........................................................11

Sample List HTML file# "..........................................................................................11

Example Patches

Sequencing the Sampler# ".....................................................................................12

Granular Scrubbing# "..............................................................................................12

Clock Sync and Shifting Ping-Pong Loops# ".........................................................13

Advanced Features

CV Calibration# "......................................................................................................14

Start-up bank# ".......................................................................................................14

Adjustable Fade Time (Smoother Looping)# ".........................................................15

System Settings File# "............................................................................................15

Variable Trigger Delay / Latency# "..........................................................................17

Color Adjustment Mode# ".......................................................................................17

Rebuilding the Index File# ".....................................................................................18

Updating Firmware (Audio Bootloader)# "...............................................................18

What version is my Sampler?# "..............................................................................18

microSD Card Specifications# "...............................................................................19

File Formats# ".........................................................................................................19

Chart of Special Button Features#........................................................................20

Page of 2 20

Setting up your Sampler

1. Remove the Sampler from the box and anti-static bag."

2. Connect the larger end of the power cable to a 16-pin Eurorack power header on your power

supply distribution system, with the red stripe towards the -12V. The other end of the power cable

is a 10-pin connector which should be connected to the so the red stripe on the power Sampler

cable is orientated towards the bottom of the module (the bottom is marked by a white stripe and

“-12V”). Note: The is reverse-polarity protected, but other modules being incorrectly Sampler

connected could damage anything on the power bus."

3. Backup your microSD card before you first power the Sampler on! We recommend you

perform a full backup of the microSD card by using a computer (use the included SD card adaptor

if needed). This will be useful if the card ever becomes damaged or you wish to restore the

Sampler to the original factory settings and samples."

4. Securely screw the to the rails of your case. Power the system on.Sampler "

5. When the first turns on, it will scan the SD Card for WAV files. The lights will flash purple, Sampler

yellow, and other colors. When the lights stop flashing and just the Bank light is on, the is Sampler

ready to play."

Never remove the microSD card when playing or recording!

Overview

• "Up to 600 samples loaded at one time (10 samples per bank)

•Includes a microSD card with over 200 samples"

• "Extremely quiet, low noise and low jitter design

•Firmware can be updated by playing an audio file into the Sampler"

Playback channel:

•Mono or stereo output through and jacksOut Left Out Right "

•Play button/trigger jack: Tapping the button or receiving a trigger starts/re-starts the sample"

•When is set to “All”, the button starts/stops the sample (set in Length Play System Settings

File, see page 15)"

•Sample CV/knob: selects a sample from the bank"

•Pitch CV/knob: playback pitch (-9 to +4 octave range)"

•Tracking: +/- 0.4cents over four octave range (C0–C3)"

•Pitch jack can be calibrated to an external keyboard or sequencer"

•Start Pos CV/knob: position in the sample to begin playback (loop start point)"

•Length CV/knob: playback time (loop end point)"

•Length knob at max: entire file is played"

•Length knob 50%-99%: 200ms - 5s of the sample is played (beginning at the Start Position)"

•Length knob <50%: Percussive decay envelope is applied to the playback (attack-only

envelope if playing Reverse)"

•Length <1%: Tiny grains are played (can be used to sweep through sample file data

manually)"

•Reverse button/jack: toggles forward/backwards"

•Bank button/jack: selects channel's bank "

# "Tip: Hold and turn the and/or knob for fast selection of bankBank Sample Length

•Reverse Start Pos+ button/knob combo allows for setting volume of each channel

independently."

• "Maximum file size for playback: 4GB per file (6.2 hours per file at 48kHz/16b/stereo)

Page of 3 20

Product specificaties

Merk:	4ms
Categorie:	Niet gecategoriseerd
Model:	Sampler

Heb je hulp nodig?

Als je hulp nodig hebt met 4ms Sampler stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd 4ms

4ms Looping Delay Handleiding

3 Augustus 2023

4ms Sampler Handleiding

3 Augustus 2023

4ms Shaped Dual EnvVCA Handleiding

24 Juni 2023

4ms VCA Matrix Handleiding

16 Juni 2023

4ms Row Power 25 Handleiding

16 Juni 2023

4ms Ensemble Oscillator Handleiding

2 Juni 2023

4ms Pod 64X Handleiding

19 Mei 2023

4ms Quad Clock Distributor Handleiding

15 Mei 2023

4ms Pod 34X Handleiding

21 April 2023

4ms Rotating Clock Divider Handleiding

16 April 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024