3M 6650-LC Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor 3M 6650-LC (28 pagina's) in de categorie Tang. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/28
March 2005
78-8135-4385-3-A
3
LC Hot Melt
Fiber Optic Connectors
Installation
2 78-8135-4385-3-A
Contents
1.0 Safety and Helpful Hints ................................................................................................................3
Hot Melt Oven Safety Information ................................................................................................3
2.0 3M™ LC Expansion 6650-LC Kit Contents ...................................................................................4
3.0 3M™ LC Connectors ......................................................................................................................5
4.0 Setup ............... 6
5.0 900 micron Cable Connector Preparation ......................................................................................8
6.0 1.6 – 2.0 mm Jacketed Cable Connector Preparation ....................................................................8
7.0 3.0 mm Jacketed Cable Connector Preparation .............................................................................8
8.0 Strip Guide ..... 9
9.0 Stripping Procedure for 900 micron Fiber .....................................................................................9
10.0 Stripping Procedure for 1.6 – 2.0 mm Jacketed Fiber ....................................................................9
11.0 Stripping Procedure for 3 mm Jacketed Fiber ..............................................................................11
12.0 Connector Mounting ....................................................................................................................12
13.0 Boot Placement for 900 micron Fiber ..........................................................................................14
14.0 Crimping and Boot Placement for 1.6 – 2.0 mm Jacketed Fiber .................................................14
15.0 Crimping and Boot Placement for 3 mm Jacketed Fiber .............................................................16
16.0 Scribing ........ 17
17.0 Multimode Polish .........................................................................................................................18
18.0 Singlemode Polish to –40db .........................................................................................................21
19.0 Singlemode Polish to –55db .........................................................................................................23
20.0 Finishing ....... 24
21.0 Installing Duplex Yokes ................................................................................................................24
22.0 3M™ Expansion Kit 6650-LC and Replacement Part Numbers ...................................................26
78-8135-4385-3-A 3
1.0 Safety and Helpful Hints
Use reagent-grade isopropyl alcohol that is 99% pure to clean the fibers and other components. When
terminating connectors on any cable containing grease, ensure that all grease is wiped away and the buffer,
coating and fiber are thoroughly cleaned with isopropyl alcohol.
Isopropyl alcohol is not shipped with the 3M™ Field Termination Kits; however, a bottle for the alcohol is
included.
Note: Carefully follow safety, health and environmental information given on the container label or the Material
Safety Data Sheet for the isopropyl alcohol.
CAUTION
Do not touch any part of the heating block of the Hot Melt oven during operation.
It is very HOT.
WARNING
• Safety glasses should be worn when working around optical fibers.
• Do not view fiber ends if they are illuminated with a laser.
• Keep oven clear from flammable material.
• Disconnect power supply when cleaning.
Hot Melt Oven Safety Information
This Hot Melt Connector Oven is intended for melting Hot Melt adhesive in Hot Melt Connectors. It has
been designed and tested for use only with the 3M™ Fiber Optic Connectors System. Other uses of this
product may lead to poor performance or an unsafe condition.
WARNING
1. Power cord must be grounded and plugged into a grounded outlet.
2. Eye hazard. Do not view fiber ends if they are laser illuminated as eye
damage may result. Illuminate fiber ends with white light only.
3. Wear safety glasses.
4. No serviceable parts - return unit to the manufacturer for servicing.
5. For indoor use only.
6. To avoid possible environmental contamination, dispose of the unit in
accordance with applicable governmental regulations.
7. Avoid touching hot surfaces.
Explanation of symbols:
Warning - Refer to accompanying documents.
Caution - Risk of electric shock. Refer all servicing to manufacturer.
This is the EU symbol for equipment that is covered under the Waste from Electrical and
Electronic Equipment (WEEE) directive per CENELEC Specification 50419, and it indicates that
certain products should not be discarded in the trash, but rather should be recycled. This applies
to all electronic pluggable and battery powered products.
Product specificaties
| Merk: | 3M |
| Categorie: | Tang |
| Model: | 6650-LC |
Heb je hulp nodig?
Als je hulp nodig hebt met 3M 6650-LC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Tang 3M
30 Maart 2023
29 Maart 2023
8 Maart 2023
30 Januari 2023
12 Januari 2023
Handleiding Tang
- Tang Milwaukee
- Tang Scarlett
- Tang Monoprice
- Tang Leatherman
- Tang Gefen
- Tang Valueline
- Tang Extron
- Tang StarTech.com
- Tang PureLink
- Tang Panduit
- Tang Neutrik
- Tang Dataflex
- Tang Weidmüller
- Tang Fixpoint
Nieuwste handleidingen voor Tang
14 Augustus 2024
26 Juli 2024
26 Juli 2024
27 Maart 2024
27 Maart 2024
6 Januari 2024
5 Januari 2024
5 Januari 2024
4 Januari 2024
4 Januari 2024