Zvox SoundBase 350 Handleiding

Zvox Hifi systeem SoundBase 350

Lees hieronder de 📖 handleiding in het Nederlandse voor Zvox SoundBase 350 (2 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 57 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

MUT E VOLUME INPUT

Volume

The VOLUME buttons on the SoundBase remote control operate in

the normal manner.

Power (STANDBY)

The Power button on the SoundBase remote control toggles the

SoundBase between STANDBY and On. You can choose to Note:

engage the AutoStandby feature from the PS menu if you want the

SoundBase to automatically go into Standby after approximately 7

minutes of silence.

A SoundBase in STANDBY will automatically turn back on if it senses

a volume adjustment or power command from the “learned” remote

control or the SoundBase remote control.

Mute

The MUTE button on the SoundBase remote control operates in

the normal manner. When MUTE is active, the display will show a

blinking -00- for 20 seconds.

Bass and Treble

The Bass control has a range of -4 to 4.

The Treble control has a range of -4 to 4.

Note: The bass output of a SoundBase system is affected by its

position within a room. You may nd it sounds best with slightly more or

less bass than the neutral setting.

Surround Settings

There are three SURROUND levels:

• Surround One (“Sd 1”) has low virtual surround effect and strong

vocals. Use this setting if vocal clarity is important to you.

• Surround Two (“Sd 2”) has moderate virtual surround effect

and moderate vocals. Most people prefer this setting for most

program material.

• Surround Three (“Sd 3”) has strong virtual surround effect

and moderate vocals. Many people prefer this setting when

watching movies.

Remote Control Capabilities

Output Leveling

Press this button to prevent large changes in volume. When engaged,

it boosts quiet dialog and lowers the output of loud commercial breaks.

It also reduces volume swings between cable or satellite channels. This

feature can be used along with any of the three Surround settings.

Accuvoice

Press this button to increase the clarity of most voices.

Pressing Accuvoice overrides the current Surround setting. A second

press returns the SoundBase to the last-used Surround setting.

STILL NEED ASSISTANCE? If your home TV system does not conform to the

descriptions in this guide, don’t hesitate to send an inquiry to info@zvoxaudio.com

or call ZVOX Audio at . Please provide your TV brand and model (866) 367-9869

number. A ZVOX Audio representative should be available (Eastern Time Zone)

Monday through Friday 9:30 AM to 7:30 PM and noon to 4:00 PM on Saturday.

4b. SoundBase Front Panel and Rear Panel

4a. Infrared Remote Control Features

of the SoundBase

Learning:

You can “teach” the SoundBase to respond to your cur-

rent TV remote control for the following functions: Vol-

ume, Mute (on/off) and Power (on/off). See the separate

sheet for instructions. After this “learning” process, you

will not need the SoundBase remote control for adjust-

ing Volume, Mute and Power. Teaching the SoundBase

to respond to your preferred remote does not affect the

included SoundBase remote. The SoundBase remote

will still provide its full range of adjustments.

Input Selection:

Pressing the INPUT button allows you to select

a different input. Inputs are selected in the

following order:

Input 1—digital (optical or coaxial jack)

Input 2—analog (input 2)

Input 3—analog (input 3)

Bluetooth device

Bass set at -2

Treble set at 1

Mute

MUT E VOL UME INPUT

MUTE VOLUME INPUT

MUT E VOL UME INPUT

MUT E VOLUME INPUT

MUTE VOLUME INPUT

® ZVOX and SoundBase are registered trademarks and AccuVoice is a trademark of ZVOX Audio, LLC.

® Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. used under license by ZVOX Audio LLC.

Setup & Operation

ZVOX SoundBase

®450/350

Don’t Worry It’s Pretty Easy.

What’s in the box

SoundBase system • Remote control • Instruction sheets

AC power cord • Optical digital and Analog signal cables

(866) 367-9869 | info@zvoxaudio.com

Place the system on furniture.

STEP 1

STEP 2

STEP 3

Connect one signal cable.

Connect the power cable.

Home Theater

Made Simple!

SoundBase Front Panel Controls and Input

SoundBase Back Panel Inputs and Outputs

1 If the system is on, a press of this button toggles MUTE on and MUTE/Power button.

off. Also while the system is on, if you press and hold the MUTE button for longer than

four seconds, the system will enter STANDBY.

2 The volume range indication is 01 to 30.VOLUME -/+.

3 INPUT. 4a Input Selects between the four input choices on a SoundBase. See in rst

column.

5. Digital Audio Troubleshooting

TV sets with no audio output:

You should check the program sources connected to the TV for an audio output (cable box, disc

player, game box). Many cable boxes and DVD/Blu-ray players have both analog and digital audio

outputs. If you connect directly to a set top box and a DVD/Bluray player, you need to switch

inputs on the TV and the SoundBase.

Bluray disc audio:

If you don’t get sound from a Bluray disc, the digital audio on that disc may be encoded using

a proprietary format. In this case, use the Bluray disc menu or the Bluray player menu to select

Dolby Digital or PCM digital output.

Internet streaming HD video audio:

If your TV features a internet connection and displays HD streaming content, it may be

necessary to select Dolby Digital or PCM digital audio in the TV or from the streaming provider’s

sound options.

1 32

Coaxial Digital Output

A few TVs, set top boxes and DVD/Blu-ray players have a coaxial digital audio output. You

can connect this output to the coaxial input on the SoundBase using a cable with an RCA

plug at each end.

Program Sources with an Analog Audio Output

If you don’t have a digital audio output option on your TV, you could connect the TV set’s

analog audio output to one of the two analog audio inputs on the the Soundbase. The analog

audio output on your TV will be a stereo minijack or a pair of RCA jacks. The two illustrations

below show the appearance of these two connections.

You could also connect the headphone output of a smartphone (or any music player) to one

of the two analog audio inputs on the SoundBase.

1. Speaker placement

You can place the SoundBase on any at, stable surface near your TV. If the TV base is small

enough, you can place the SoundBase system on a piece of furniture and then place the TV

on top of the SoundBase.

• Consider the surface that will support the SoundBase. It is the SoundBase owner’s

responsibility to insure that a furniture nish is unaffected by supporting the combined

weight of a SoundBase and possibly a TV. Place an appropriate barrier between the surface

and the feet of the SoundBase if you are in doubt. The four support pads on the bottom of

a SoundBase are a soft, inert synthetic material that does not react with typical furniture

nishes. But some furniture nishes can be deformed or altered by having any heavy

object resting on them for a long period of time. ZVOX Audio, Inc. cannot be responsible

for any change in the appearance of any supporting surface nish that may occur after a

SoundBase is placed upon the surface.

• A safe installation is the SoundBase owner’s responsibility.

• Use an unswitched AC outlet to provide power to a SoundBase. If Auto Standby is turned

on, a SoundBase will always enter its Standby state after 30 minutes of inactivity. A

SoundBase uses less than 0.5 watt in Standby. Use of a switched AC outlet to cut off AC

power to a SoundBase system may erase user preferences and delays subsequent turn-on.

• A TV heavier than 70 lbs (32 kg) should not be placed directly on top of a SoundBase 450.

• A TV heavier than 50 lbs (23 kg) should not be placed directly on top of a SoundBase 350.

• A at panel TV has a high center of gravity. Please conrm the furnishing supporting

your TV and the SoundBase is stable and secure. The surface supporting the

SoundBase/TV combination should not move in any direction.

• All TV manufacturers recommend that a at panel TV be anchored to a secure vertical

surface with a tether. This prevents a household accident from causing a TV to fall off its

supporting surface. ZVOX Audio recommends you heed this recommendation and all other

installation recommendations made by the TV manufacturer.

2. Connecting your TV to the SoundBase

Almost all HDTVs have an audio output, which you can connect to your SoundBase. You

should not disconnect or change any video program source connected to your TV.

15. –This product may be Grounding or Polarization

equipped with a polarized alternating-current line

plug (a plug having one blade wider than the other).

This plug will t into the power outlet only one way.

This is a safety feature. If you are unable to insert the

plug fully into the outlet, try reversing the plug. If the

plug should still fail to t, contact your electrician to

replace your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

–This product is equipped with Alternate Warnings

a three-wire grounding-type plug, a plug having a

third (grounding) pin. This plug will only t into a

grounding-type power outlet. This is a safety feature.

If you are unable to insert the plug into the outlet,

contact your electrician to replace your obsolete

outlet. Do not defeat the safety purpose of the

grounding-type plug.

16. Ventilation–Slots and openings in the cabinet

are provided for ventilation and to ensure reliable

operation of the product and to protect it from

overheating, and these openings must not be

blocked or covered. The openings should never be

blocked by placing the product on a bed, sofa, rug,

or other similar surface. This product should not be

placed in a built-in installation such as a bookcase

or rack unless proper ventilation is provided or the

manufacturer’s instructions have been adhered to.

17. The MAINS plug or an appliance coupler is used as the

disconnect device, the disconnect device shall remain

readily operable.

18. CLASS II apparatus with double insulation, and no

protective earth provided.

19. Danger of explosion if the remote control CAUTION:

battery is incorrectly replaced. Replace only with the

same or equivalent type.

20. The remote control battery (battery or WARNING:

batteries or battery pack) shall not be exposed to

excessive heat such as sunshine, re or the like.

21. No naked ame sources, such as lighted candles,

should be placed on the apparatus.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not t into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11. Only use attachments/accessories specied by

the manufacturer.

12. Use only with the cart, stand, tripod,

bracket, or table specied by the

manufacturer, or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualied service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

Important Safety Instructions

READ THIS FIRST

Important Safety Instructions For ZVOX System

CAUTION

RISK OF ELECTRICAL

SHOCK, DO NOT OPEN

Warning: To reduce

the risk of electrical

shock, do not remove

cover (or back) – no

serviceable parts

inside. Refer servicing

to qualied service

personnel.

This lightning ash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the presence

of uninsulated “dangerous voltage” within

the product’s enclosure that may be of

sufcient magnitude to constitute a risk

of electrical shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

TO PREVENT FIRE OR

SHOCK HAZARD, DO

NOT EXPOSE THIS

APPLIANCE TO RAIN

OR MOISTURE.

THIS APPLIANCE SHALL

NOT BE EXPOSED

TO DRIPPING OR

SPLASHING WATER

AND NO OBJECT

FILLED WITH LIQUIDS

SUCH AS VASES

SHALL BE PLACED

ON APPARATUS.

WARNING

3. Connect the AC cord

After making the signal connection, connect the AC power cord to the back of the speaker.

Then connect the AC power cord to an AC power receptacle. Turn on the speaker using the

power switch on the back panel next to the AC cord.

If your home TV system does not conform to the descriptions in this

guide, don’t hesitate to send an inquiry to or info@zvoxaudio.com

call ZVOX Audio at . Please provide your TV brand (866) 367-9869

and model number. A ZVOX Audio representative should be available

(Eastern Time Zone) Monday through Friday 9:30 AM to 7:30 PM and

noon to 4:00 PM on Saturday.

You can connect a minijack analog audio output to Analog Input 2.

You can connect an RCA jack analog audio output to Analog Input 2.

AC cord connection to SoundBase back panel.

TV Optical Output ZVOX Optical Input

Optical Cable

Optical Digital Output

Almost all HDTVs use an optical digital audio output, which you connect to the Soundbase’s

optical input using an optical cable.

Stable Placement. Do not place the ZVOX

system on an unstable cart, stand, bracket

or table. The ZVOX system may fall, causing

serious injury to a child or adult and serious

damage to the product. Do not use the

ZVOX system on any unstable surface.

Placement of a TV on the ZVOX system. A television that

weighs less than the cited limits and that has a base that is

smaller than both dimension limits (shown below) can be

placed on top of a ZVOX system—BUT ONLY WHEN THE

FOLLOWING SAFETY PRECAUTIONS ARE STRICTLY

OBSERVED. PLACING A TV ON TOP OF A ZVOX SYSTEM

WITHOUT FOLLOWING ALL THE PRECAUTIONS IS

DANGEROUS AND SHOULD NOT BE DONE.

• The TV must be anchored to the rear wall using

anchor bolts and supporting cables according

to the recommended guidelines provided by the

TV manufacturer. Household accidents and other

unforeseen disturbances are likely to occur. ZVOX Audio

Special Safety Warnings Regarding Placement of

ZVOX System and Other Equipment

provides no guarantee that any object placed on top

of a ZVOX Audio product is safe and stable. It is the

sole responsibility of the ZVOX owner to check that

any object placed on the ZVOX system is stable at the

time of installation and at frequent intervals afterward.

• The TV must weigh 70 pounds SoundBase 450:

(32 kg) or less.

The base of the TV must measure less than:

Width Depth

26 in (660 mm) 14 in (355 mm)

• The TV must weigh 50 pounds SoundBase 350:

(23 kg) or less.

The base of the TV must measure less than:

Width Depth

16 in (406 mm) 12 in (305 mm)

• Install the ZVOX system on a solid and at surface.

Be sure to prevent the ZVOX system from changing

position after installation.

Simple Setup – Just Four Steps

Connect the

SoundBase

to your TV

and/or audio

devices.

Learn the

features and

controls of the

ZVOX system.

“Teach” the SoundBase

to respond to your

preferred remote

controls commands

(Volume/Mute/Power).

Place the

SoundBase.

Input 2

Product specificaties

Merk:	Zvox
Categorie:	Hifi systeem
Model:	SoundBase 350

Heb je hulp nodig?

Als je hulp nodig hebt met Zvox SoundBase 350 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Hifi systeem Zvox

Zvox SoundBase 770 Handleiding

4 Juli 2023

Zvox SoundBase 450 Handleiding

1 Juni 2023

Zvox SoundBase 670 Handleiding

27 Mei 2023

Zvox Z-Base 580 Handleiding

25 Mei 2023

Zvox SoundBase 350 Handleiding

25 Mei 2023

Zvox Z-Base 525 Handleiding

24 Mei 2023

Zvox SoundBase 570 Handleiding

18 Mei 2023

Zvox Z-Base 220 Handleiding

12 Mei 2023

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem

Lenoxx CD813 Handleiding

16 November 2024

Denon CEOL N-8 Handleiding

16 November 2024

Fiio M7K Handleiding

16 November 2024

Fiio X1II Handleiding

16 November 2024

Fiio M3 Handleiding

16 November 2024

Fiio X3 Mark III Handleiding

16 November 2024

Pro-Ject BT Box E HD Handleiding

15 November 2024

Blaupunkt RCD 204 Handleiding

15 November 2024

Samsung MM-X7 Handleiding

15 November 2024

Auna VCP-191 Handleiding

14 November 2024