Zvox SB380 SoundBar Handleiding

Zvox Luidspreker SB380 SoundBar

Lees hieronder de 📖 handleiding in het Nederlandse voor Zvox SB380 SoundBar (2 pagina's) in de categorie Luidspreker. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Mute

The MUTE button on the soundbar remote control operates

in the normal manner. When MUTE is active, the display will

show a blinking -00- for 20 seconds.

Bass and Treble

The Bass control has a range of -6 to 4.

The Treble control has a range of -4 to 4.

Note: The bass output of a soundbar system is affected by

its position within a room. You may nd it sounds best with

slightly more or less bass than the neutral setting.

Surround Settings

There are three SURROUND levels:

• Surround One (“Sd 1”) has low virtual surround effect and strong

vocals. Use this setting if vocal clarity is important to you.

• Surround Two (“Sd 2”) has moderate virtual surround effect

and moderate vocals. Most people prefer this setting for most

program material.

• Surround Three (“Sd 3”) has strong virtual surround effect

and moderate vocals. Many people prefer this setting when

watching movies.

Output Leveling

Press this button to prevent large changes in volume. When

engaged, it boosts quiet dialog and lowers the output of loud

commercial breaks. It also reduces volume swings between

cable or satellite channels. This feature can be used along

with any of the three Surround settings.

Accuvoice

Press this button to increase the clarity of most voices.

Pressing Accuvoice overrides the current Surround setting.

A second press returns the soundbar to the last-used

Surround setting.

STILL NEED ASSISTANCE? If your home TV system does

not conform to the descriptions in this guide, don’t hesitate

to send an inquiry to info@zvoxaudio.com or call ZVOX Audio

at (866) 367-9869. Please provide your TV brand and model

number. A ZVOX Audio representative should be available

(Eastern Time Zone) 9:30 AM to 7:30 PM Monday through Friday.

4a. Controlling the ZVOX Soundbar

Using Your Preferred Remote Control:

Your preferred TV remote control can control Volume,

Mute and Power on the ZVOX soundbar. See the

separate instruction sheet that describes the process

of teaching the ZVOX to respond to these commands.

The ZVOX soundbar remote will always provide a full

range of adjustments, along with your preferred remote.

Button functions on the soundbar

remote control

Volume

The VOLUME buttons operate in the normal manner

Power (STANDBY)

The Power button toggles the soundbar between

STANDBY and On. Note: A soundbar automatically enters

STANDBY if it is silent for longer than approximately 30

minutes. A soundbar will turn back on when it senses a

restored digital signal

(Input 1 only) or an infrared power or volume adjustment.

Input Selection:

A brief press and release of the INPUT button on the sound-

bar remote control allows you to select between the four

separate inputs on the soundbar.

Input 1—digital

Input 2—digital

Input 2—analog (RCA jacks)

Bass set at -2

Treble set at 1

Mute

MUTE VOLUME INPUT

Setup & Operation

ZVOX Audio SB380 Soundbar

Don’t Worry It’s Pretty Easy.

What’s In The Box

Soundbar • Remote control • Instruction sheets

AC power cord with integral power supply • Optical Digital and Analog signal cables

(866) 367-9869 | info@zvoxaudio.com

Position The System.

STEP 1

STEP 2

STEP 3

STEP 4

Connect One Signal Cable.

Connect the Power cable.

Use the Soundbar remote to

turn on power and adjust volume.

Home Theater

Made Simple!

6. Soundbar Wall Mounting Information

Dimensioned diagrams of each ZVOX Audio soundbar model can be found on

ZVOX Audio's website.

The soundbar has two keyhole mounting sites on its back panel. You can mount the

soundbar onto two screwheads using these mounting sites. A ZVOX Audio soundbar

weighs between 15 and 20 pounds. NOTE: It is the installer’s responsibility to ensure

the screws are installed into the wall or other surface securely and that the screwheads

are the correct size for the hanger mounts on the rear of the soundbar. ZVOX Audio

recommends your mounting sites be able to support at least twice the weight of

the soundbar.

4b. End Panel Controls

on the Soundbar

On the viewer’s right end of the soundbar

are four buttons.

A) POWER button:

This button turns the soundbar “ON” if it is in

Standby. If this button pressed briey while

the soundbar is “ON”, it will mute and un-

mute the soundbar. To turn off the soundbar,

press and hold down this button for about

ve seconds.

B) Volume Up/Down rocker button

Adjusts volume up and down. Pressing

either side of this button will “unmute” the

speaker if it is muted.

C) Input button:

A brief press and release of the INPUT

button selects the next input in sequence.

5. Tonal Prole Setting

The soundbar has three settings to better match

the acoustics of its room position.

Face Front ........ PS16 - on a at surface, facing front.

Face Up ............ PS17 - on a at surface, facing up.

Wall mount ....... PS18 - on a vertical surface,

facing into the room.

The default setting for the soundbar is Face Front.

If your soundbar’s position is Face Up or

Wall mount, you should select PS17 or PS18

from the PS menu.

PS Menu: you bring up the PS menu by pressing down

on two buttons on the end panel of the soundbar:

Power ( ) and Volume Up (+). After about ve to seven

seconds you should see PS start ashing. The rst time

you bring up the PS menu, it should show “PS 0”.

Once you see the PS display, release the buttons. Then press and release the Volume Up button

to increase the PS number. Continue pressing and releasing the Volume Up button until you

reach the setting you want: PS16, PS17 or PS18.

For further information about the options provided by the PS menu, see the separate information

sheet Soundbar Adjustment Options, available online at ZVOX Audio's website.

Face Front Face Up Wall Mount

Analog Audio Output

You can connect a TV set’s analog audio output to the analog audio input on the the

soundbar (left and right RCA jacks). The analog audio output on your TV will be a 1/8 inch

stereo minijack or a pair of RCA jacks. The two illustrations below show the appearance of

these two audio output connections.

1. Speaker placement

You can place the soundbar on any at, stable surface near your TV.

There are three general placement options, illustrated above:

Face Front You can place the soundbar on a at surface so it faces forward.

This placement is ideal for a shelf below, above or near the

television.

Face Up You can place the soundbar facing up—often in front of the

television. The bottom of the soundbar should face the listening

area. Check to ensure the soundbar does not block the television

infrared remote sensor. There should be no shelf or at surface

immediately above the soundbar in this conguration.

Wall Mount The soundbar has two sturdy keyhole-shaped hanger mounts on

the back panel. You can hang the soundbar on two screwheads

that are securely installed in a wall or other vertical surface.

• Consider the nish of the surface that will support the soundbar. It is the

soundbar owner's responsibility to insure that a surface nish that contacts

the soundbar is protected, should this be a concern of the soundbar owner.

The contact area on the soundbar is made of inert synthetic materials that

typically do not react with furniture or wall nishes. But any wall or surface nish

can be altered by having any heavy object resting on it for a long period of time.

Place an appropriate barrier between any surface and the soundbar if you

are concerned about the nish of the supporting surface.

• A safe, secure installation is the soundbar owner’s responsibility.

• Use an unswitched AC outlet to provide power to a soundbar. With the

soundbar’s Auto Standby feature turned on, an soundbar will enter its Standby

state on or before 30 minutes of inactivity. A soundbar uses less than 0.5 watt in

Standby. Using a switched AC outlet to cut off AC power to a soundbar system

is not recommended. It delays subsequent turn-on.

• Do not place any objects on top of a soundbar.

15. Grounding or Polarization–This product may be

equipped with a polarized alternating-current line

plug (a plug having one blade wider than the other).

This plug will t into the power outlet only one way.

This is a safety feature. If you are unable to insert the

plug fully into the outlet, try reversing the plug. If the

plug should still fail to t, contact your electrician to

replace your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

Alternate Warnings–This product is equipped with

a three-wire grounding-type plug, a plug having a

third (grounding) pin. This plug will only t into a

grounding-type power outlet. This is a safety feature.

If you are unable to insert the plug into the outlet,

contact your electrician to replace your obsolete

outlet. Do not defeat the safety purpose of the

grounding-type plug.

16. Ventilation–Slots and openings in the cabinet

are provided for ventilation and to ensure reliable

operation of the product and to protect it from

overheating, and these openings must not be

blocked or covered. The openings should never be

blocked by placing the product on a bed, sofa, rug,

or other similar surface. This product should not be

placed in a built-in installation such as a bookcase

or rack unless proper ventilation is provided or the

manufacturer’s instructions have been adhered to.

17. The MAINS plug or an appliance coupler is used as the

disconnect device, the disconnect device shall remain

readily operable.

18. CLASS II apparatus with double insulation, and no

protective earth provided.

19. CAUTION: Danger of explosion if the remote control

battery is incorrectly replaced. Replace only with the

same or equivalent type.

20. WARNING: The remote control battery (battery or

batteries or battery pack) shall not be exposed to

excessive heat such as sunshine, re or the like.

21. No naked ame sources, such as lighted candles,

should be placed on the apparatus.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not t into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11. Only use attachments/accessories specied by

the manufacturer.

12. Use only with the cart, stand, tripod,

bracket, or table specied by the

manufacturer, or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualied service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

Important Safety Instructions

READ THIS FIRST

Important Safety Instructions For ZVOX Audio System

CAUTION

RISK OF ELECTRICAL

SHOCK, DO NOT OPEN

Warning: To reduce

the risk of electrical

shock, do not remove

cover (or back) – no

serviceable parts

inside. Refer servicing

to qualied service

personnel.

This lightning ash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the presence

of uninsulated “dangerous voltage” within

the product’s enclosure that may be of

sufcient magnitude to constitute a risk

of electrical shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

TO PREVENT FIRE OR

SHOCK HAZARD, DO

NOT EXPOSE THIS

APPLIANCE TO RAIN

OR MOISTURE.

THIS APPLIANCE SHALL

NOT BE EXPOSED

TO DRIPPING OR

SPLASHING WATER

AND NO OBJECT

FILLED WITH LIQUIDS

SUCH AS VASES

SHALL BE PLACED

ON APPARATUS.

WARNING

If your home TV system does not match the descriptions in this guide, don’t hesitate

to send an inquiry to info@zvoxaudio.com or call ZVOX Audio at (866) 367-9869.

Please provide your TV brand and model number. A ZVOX Audio representative

should be available (Eastern Time Zone) 9:30 AM to 7:30 PM Monday through Friday.

2. Connecting your TV to the SB380 Soundbar

All current TVs have an audio output. It is likely that one of the cables provided with the

soundbar can be used to connect the TV audio output to an input on the soundbar. DO NOT

disconnect any video program source connected to your TV (like a cable or satellite set top

box, DVD/Bluray or similar).

Stable Placement. Do not place the

ZVOX system on an unstable cart,

stand, bracket or table. The ZVOX

system may fall, causing serious

injury to a child or adult and serious

damage to the product. Do not use

the ZVOX system on any unstable surface.

The soundbar has two keyhole-shaped mounting

locations on the back panel. These mounting sites

will securely hold a screwhead that is no larger

Special Safety Warnings Regarding Placement

of the ZVOX System and Other Equipment

Connect the

Soundbar

to your TV.

Learn the

features of the

Soundbar.

“Teach” the

Soundbar your

preferred remote.

Place or

hang the

Soundbar.

Second Digital Input

The optical audio output of a second audio source (Bluray/DVD player, for example) can

be connected to optical input 2 on the soundbar. It is selected when you see In2d on the

soundbar display.

Face UpFace Front Wall Mount

If You Have A Coaxial Digital Audio Signal Source:

This ZVOX Audio soundbar does not have a coaxial-format digital audio input. A coaxial

digital to optical digital audio converter OR a coaxial digital to stereo analog audio converter

should be used. Contact ZVOX Audio at info@zvoxaudio.com to learn what suitable audio

converters are available.

3. Connect the power supply adapter

FIRST, connect the DC plug of the power supply adapter to the DC IN jack on the back of

the soundbar. THEN connect the AC plug of the power supply adapter to an unswitched AC

power outlet.

Optical Digital Audio Output Jack (see above image)

Most HDTVs have an optical digital audio output jack. Use the provided optical cable

to connect the TV’s output jack to optical input 1 on the soundbar.

than 3/8" (10mm) in diameter. It is the installer’s

responsibility to conrm each mounting site used to

support the the soundbar has an adequate weight-

handling margin to support both the weight of the

soundbar and extra weight that may inadvertently be

applied as a result of a house-hold accident. Damage

that may occur to the soundbar during or after the

mounting process or any other installation activity

is NOT covered under the terms of the ZVOX Audio

limited warranty.

Simple Setup – Just Four Steps

AUDIO

OUT

VIDEO IN

S VIDEO

TV RCA Jack

Audio Output

Right Channel

Left Channel

Soundbar

Input

Panel

DIGITAL

AUDIO

OUT

HDMI 1 HDMI 2

VIDEO

Optical Digital

Audio Input

Optical

Output

Optical Cable

Soundbar

Input

Panel

TV Minijack

Audio Output

Right Channel

Left Channel

Soundbar

Input

Panel

Y/VIDEO

L/MONO

AUDIO

OUT

ANT/

CABLE

Right Channel

Left Channel

Soundbar

Input

Panel

DIGITAL

AUDIO

OUT Optical output

of disc player

or other source

DC Power Input

To AC Power

Power Supply Adapter

Connect

first

Connect

second

Soundbar

Input

Panel

Product specificaties

Merk:	Zvox
Categorie:	Luidspreker
Model:	SB380 SoundBar

Heb je hulp nodig?

Als je hulp nodig hebt met Zvox SB380 SoundBar stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Luidspreker Zvox

Zvox SB400 Soundbar Handleiding

14 Augustus 2023

Zvox AccuVoice AV200 Handleiding

14 Augustus 2023

Zvox SoundBase 440 Handleiding

14 Augustus 2023

Zvox ACCUVOICE AV203 Handleiding

14 Augustus 2023

Zvox SB380 SoundBar Handleiding

14 Augustus 2023

Zvox Z-Base 555 Handleiding

14 Augustus 2023

Zvox AccuVoice AV155 Handleiding

14 Augustus 2023

Zvox SB500 Soundbar Handleiding

14 Augustus 2023

Handleiding Luidspreker

Nieuwste handleidingen voor Luidspreker

Nikkei NWS04 Handleiding

26 Oktober 2024

JBL AS5 Handleiding

2 November 2024

Envivo ENV-1690 Handleiding

21 December 2023

JBL 4367 Handleiding

25 Oktober 2023

JBL 4349 Handleiding

25 Oktober 2023

JBL B-8IC Handleiding

25 Oktober 2023

JBL B-6ICDT Handleiding

25 Oktober 2023

Tannoy turnberry he Handleiding

15 Oktober 2023

Omnitronic PAS-212 Handleiding

9 Oktober 2023

KEF c5 Handleiding

8 Oktober 2023