ZKTeco FBL5022 Handleiding

ZKTeco Niet gecategoriseerd FBL5022

Lees hieronder de 📖 handleiding in het Nederlandse voor ZKTeco FBL5022 (7 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/7

User Manual

Flap Barrier Turnstile- L6 SFB 000 Pro eries

Applicable Model(s): FBL1000 Pro series, FBL1200 Pro series, FBL2000 Pro series,

FBL2200 Pro series, FBL4000 Pro series, FBL4200 Pro series, FBL5000 Pro series,

FBL5200 Pro series, FBL6000 Pro series, FBL6200 Pro series

Version: 1.1

Date: 2019October

FBL6 1 000 Pro series User Manual

1. Product Introduction

The wing gate is composed of the chassis, core component, wing arms, a , PCB (p )rinted circuit board

infrared sensors, a reader, and the access control system.

The system uses standard electric interfaces. It meets fire fighting passage requirements and is

equipped with dedicated fire control linkage interfaces. The entire system complies with the same

quality standard to ensure reliability, stability, and smoothness of the system during running.

The wing gate is applicable to work attendance, access control, consumption management, and

special passage control of enterprises and institutional organizations. It is conducive to the

management of ticket check passages in stations, , convention and exhibition wharves centres, and

swimming pools.

1.1 Product D Appearance and imensions

Below is the design and dimensions of : FBL6000 Pro

4 L6 FB 000 Pro series User Manual

3. Electric and Civil Installation

1. Device i c nstallation onditions

The location where the device is flat surface so that theinstalled must be a concrete expansion screws

can be fastened . If the firmly planned foundation does not meet this criterion, consult professional

building or decoration personnel and create stable conditions for firmly of fastening the wing gate.

2. Determination of the l ocation of device installation

Decide the installation location based on the space needed as illustrated in Figure 3- -1A and Figure 3

1B.

Figure 3 Figure 3- -1A Single Passage Wing Gate - - 1B Dual Passage Wing Gate

3. Cable connection

For the location of the hole come out where the cables , please refer to Figure 3- . 2 below

4. Device installation

a) Turn on the master machine and slave machine, adjust the wing arms to ensure that the wing

arms are in the same line and the distance between wings is 0 mm. 5 Turn the wings to the OFF

state.

b) Test whether the infrared rays transmitted by infrared sensors on both sides align with each other.

c) Make marks: Mark the screw hole of the base and chassis base edges on the ground.

Product specificaties

Merk:	ZKTeco
Categorie:	Niet gecategoriseerd
Model:	FBL5022
Kleur van het product:	Roestvrijstaal
Ingebouwd display:	Ja
Gewicht:	126000 g
Breedte:	300 mm
Diepte:	1200 mm
Hoogte:	1010 mm
Gewicht verpakking:	183000 g
Breedte verpakking:	840 mm
Diepte verpakking:	1400 mm
Hoogte verpakking:	1100 mm
Soort:	Neergaande arm optische tourniquet
Materiaal behuizing:	Roestvrijstaal
Frame materiaal:	Metaal
Geschikt voor buitengebruik:	Ja
Geschikt voor gebruik binnen:	Ja
AC-ingangsspanning:	100 - 120, 200 - 240 V
Bedrijfstemperatuur (T-T):	-28 - 60 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 80 procent
Type beeldscherm:	LED
Gemiddeld aantal cycli tussen storingen (MCBF):	2000000
Barrièremateriaal:	Acryl
Passeersnelheid (personen per minuut):	30 persoon/personen
Nooddeur ontgrendeling:	Ja