Zenit TTL Handleiding

Zenit Fotocamera TTL

Lees hieronder de 📖 handleiding in het Nederlandse voor Zenit TTL (7 pagina's) in de categorie Fotocamera. Deze handleiding was nuttig voor 66 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/7

ZENIT-TTL User manual, 1965 year

– 1 –

Zenit TTL

This text is identical to the one in the User manual, English version, 1965 year.

1. Purpose and Advantages

ZENIT-TTL camera is intended for taking amateur pictures on black-and-white color films.

The camera is provided with a semi-automatic exposure meter operating through the lens (TTL) a

self-timer and is synchronized for flash lamp operation. It accepts interchangeable lenses provided,

with mounting thread of M42x1 and back focal distance of 45.5 mm.

ZENIT-TTL can be used for special kinds of photography such as reproduction works with the help

of extension tubes, taking close-up pictures of small subjects at close distance (macrophotography),

taking pictures with the help of a microscope (microphotography) and so on.

ZENIT-TTL camera has the following advantages:

•

semi-automatic TTL exposure meter provides for correct exposure setting when taking pictures

with the standard lens as well as with interchangeable lenses and extension tubes;

•

instant return mirror ensures continuous viewing of a subject before and after exposure;

•

high speed lens is provided with a pre-set diaphragm mechanism which automatically closes

the diaphragm at the moment of the shutter operation (“A” mode); manual operation of the diaphragm

is provided as well (“M” mode);

•

fully open diaphragm ensures maximum brightness of the image seen in the viewfinder; this

fact is very important at the moment of viewing and focusing;

•

focusing can be done both by a microraster or a ground glass;

•

speedy exposure setting, the system of simplified film loading, rewinding of exposed film with

the shutter disengaging bush in locked position — all these features cut down the time necessary for

preparing the camera for operation.

2. Specifications

Frame size — 24x36 mm

Film used — 35 mm, perforated

Length of film in cassette — 1,65 m

Number of frames — 36

Shutter speeds — from 1/30 to 1/500 s, “B” (by hand) and long exposure time

Standard lens — HELIOS-44M:

focal length — 58 mm

maximum relative aperture — f/2

diaphragm scale — from 2 to 16

distance scale — from 0,55 to “ ” ∞

Exposure meter supply — from one battery of Mallory “PX-13” type

Film speed range — from 16 to 500 GOST units

Lens mounting thread — M42x1

Light filter thread — M52x0,75

Tripod socket thread — 1/4ʺ

Viewfinder linear field of view — 20x28 mm

Overall dimentions without case — 138x100x93 mm

Mass — 1,01 kg

ZENIT-TTL User manual, 1965 year

– 2 –

Certificates of Authorship:

No 366447 of 14 June 1972; No 150360 of 18 December 1961; No 153652 of 26 February 1952; No

102683 of 7 February 1951.

Attention!

The present Description contains the basic characteristics and essential operating principles of the

camera and should not be regarded as a hand-book on photography in general.

Before using the camera, make thorough study of the operating procedure given in the present

Description.

Due to ever-advancing development in camera construction minor differences may occur between

the text and your camera. Load and unload the camera in faint diffused light avoiding direct sun rays.

Do not rotate the shutter speed dial within the interval between “500” and “B” and the film speed

setting dial within the figureless interval.

Do not turn the shutter release button if not necessary to avoid disengagement of the shutter cocking

mechanism.

Always wind the shutter (by two or three strokes of the lever) as far as it will go to avoid blank

exposures.

Do not keep the camera with the shutter cocked for a long period of time, since it is likely to affect

the shutter operation When taking pictures in frosty weather (below -10°C), keep the camera under

your street-clothes but not in the open air and take it out only for the moment of photographing.

3. Main Assemblies and Details

1 — self-timer lever

2 — self-timer release button

3 — release button threaded for cable release

4 — flash unit connector socket

5 — eyelets for strap securing

6 — film rewind crank

7 — film speed dial

8 — shutter speed dial

9 — shutter disengaging bush

10 — exposure counter dial

11 — shutter cocking and film advance lever

12 — protective strip

ZENIT-TTL User manual, 1965 year

– 3 –

13 — cassette chamber 18 — lock latch

14 — cassette spool guide 19 — folding back door

15 — cap of compartment for battery of Mallory PX-13 type 20 — take-up spool

16 — viewfinder eyepiece 21 — sprocket

17 — accessory shoe for mounting flash lamp and other accessories

HELIOS-44M

22 — lens mounting ring

23 — diaphragm scale

24 — depth-of-field scale

25 — distance scale

26 — focusing ring

27 — diaphragm setting ring

28 — diaphragm mode selector switch

29 — diaphragm mechanism pusher

4. Preparing for picture taking

4.1. Loading the camera

Put a battery of Mallory PX-13 type into the compartment in the way

indicated in Section “Changing the Power Source of Exposure Meter

Electric Circuit“.

Load the camera in faint diffused light in the following way:

a) pull lock latch 18 upwards and open back door 19;

b) lift crank 6 and pull out the rewind knob;

c) put a loaded cassette into chamber 13;

d) return the rewind knob to its initial position and fold crank 6;

e) pull out the film leader as long as to reach the camera edge and insert

it into the take-up spool 20 slot; in so doing be sure to engage a perforation

hole with a tooth of sprocket 21;

f) close the back door;

g) cock the shutter by turning lever 11 as far as it will go. Press release

button 3. As the shutter is cocked, the film is advanced by one frame. To

transport a nonexposed portion of film to the film gate, cock the shutter

two times pressing the release button after each cocking.

Should the film be wound tightly in the cassette, the film rewind knob

will rotate when the shutter is being cocked. If the film is loose in the

cassette, the rewind knob will fail to rotate at the first frames;

h) bring figure “0” of exposure counter dial 10 to the index mark. Set

the exposure counter only with the shutter cocked;

i) set the film speed value by turning dial 7 till it aligns with the index

mark on the camera shield; in so doing you will feel the dial is locked.

Note: Dashes engraved between figures on the film speed dial enable to set intermediate values of

film speed in accordance with the Reference Table.

Product specificaties

Merk:	Zenit
Categorie:	Fotocamera
Model:	TTL

Heb je hulp nodig?

Als je hulp nodig hebt met Zenit TTL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Fotocamera Zenit

Zenit C Handleiding

6 Juli 2023

Zenit 122 Handleiding

3 Juni 2023

Zenit E Handleiding

1 Juni 2023

Zenit KM Handleiding

1 Juni 2023

Zenit TTL Handleiding

20 Mei 2023

Zenit 12 XP Handleiding

15 Mei 2023

Zenit S Handleiding

27 Oktober 2022

Handleiding Fotocamera

Nieuwste handleidingen voor Fotocamera

Kodak Ektar H35N Handleiding

14 December 2024

Kodak Step Touch Handleiding

14 December 2024

Kodak Advantix 3600ix Handleiding

14 December 2024

Kodak EasyShare C360 Zoom Handleiding

14 December 2024

Kodak EasyShare Z8612 IS Handleiding

14 December 2024

Imou Ranger Dual 10MP Handleiding

14 December 2024

Imou Ranger Dual 8MP Handleiding

14 December 2024

Imou Ranger Dual 6MP Handleiding

14 December 2024

Fujifilm Intax Wide 300 Handleiding

14 December 2024

Fujifilm Intax Mini Hello Kitty Handleiding

14 December 2024