Zebra TLP 2824 Plus Handleiding

Zebra Labelprinter TLP 2824 Plus

Lees hieronder de đź“– handleiding in het Nederlandse voor Zebra TLP 2824 Plus (104 pagina's) in de categorie Labelprinter. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/104
ii
980643-001 Rev. A TLP 2824 Plus™ User Guide 3/31/09
©2009 ZIH Corp. The copyrights in this manual and the software and/or firmware in the
label printer described therein are owned by ZIH Corp. Unauthorized reproduction of this
manual or the software and/or firmware in the label printer may result in imprisonment of
up to one year and fines of up to $10,000 (17 U.S.C.506). Copyright violators may be
subject to civil liability. All trademarks and registered trademarks are property of their
respective owners. All rights reserved.
This product may contain ZPL®, ZPL II®, and ZebraLink™ programs; Element Energy
Equalizer™ Circuit; E3®; and Monotype Imaging fonts. Software ©ZIH corp. All rights
reserved worldwide.
ZebraLink and all product names and numbers are trademarks, and Zebra, the Zebra logo,
ZPL, ZPL II, Element Energy Equalizer circuit, and E3 Circuit are registered trademarks
of ZIH Corp. All rights reserved worldwide.Monotype®, Intellifont® and UFST® are
trademarks of Monotype Imaging, Inc. registered in the United States Patent and
Trademark Office and may be registered in certain jurisdictions.
CG Triumvirate is a trademark of Monotype Imaging, Inc. and may be registered in some
jurisdictions.
TrueType® is a trademark of Apple Computer, Inc. registered in the United States Patent
and Trademark Office and may be registered in certancertain jurisdictions.
Proprietary Statement
This manual contains proprietary information of Zebra Technologies Corporation and its
subsidiaries (“Zebra Technologies”). It is intended solely for the information and use of
parties operating and maintaining the equipment described herein. Such proprietary
information may not be used, reproduced, or disclosed to any other parties for any other
purpose without the express written permission of Zebra Technologies.
Product Improvements
Continuous improvement of products is a policy of Zebra Technologies. All specifications
and designs are subject to change without notice.
Liability Disclaimer
Zebra Technologies takes steps to ensure that its published Engineering specifications and
manuals are correct; however, errors do occur. Zebra Technologies reserves the right to
correct any such errors and disclaims liability resulting therefrom.
Limitation of Liability
In no event shall Zebra Technologies or anyone else involved in the creation, production,
or delivery of the accompanying product (including hardware and software) be liable for
any damages whatsoever (including, without limitation, consequential damages including
loss of business profits, business interruption, or loss of business information) arising out
of the use of, the results of use of, or inability to use such product, even if Zebra
Technologies has been advised of the possibility of such damages. Some jurisdictions do
not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
Canadian DOC Compliance Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
iii
3/31/09 TLP 2824 Plus™ User Guide 980643-001 Rev. A
FCC Compliance Statement
This device complies with Part 15 rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for Class B Digital
Devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a residential
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the product manuals, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, the user is encouraged to do one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced RF service technician for help.
The user is cautioned that any changes or modifications not expressly approved by Zebra
Technologies could void the user’s authority to operate the equipment. To ensure compliance,
this printer must be used with fully shielded communication cables.
Environmental Management
Do not dispose of this product in unsorted municipal waste. This product is recyclable, and
should be recycled according to your local standards.
For more information, please see our website at:
Web address: www.zebra.com/environment


Product specificaties

Merk: Zebra
Categorie: Labelprinter
Model: TLP 2824 Plus
Gewicht: 1600 g
Gewicht verpakking: 2800 g
Stroomvoorziening: 100 - 240 VAC, 50 - 60 Hz
Connectiviteitstechnologie: Bedraad
Certificering: -FCC, \n-VCCI, \n-C-TICK, \n-UL, \n-NOM, \n-CE, \n-IRAM, \n-AAMI.
Intern geheugen: 8 MB
RS-232 port: 1
Temperatuur bij opslag: -40 - 60 °C
Luchtvochtigheid bij opslag: 5 - 95 procent
Flash memory: 4 MB
Maximale resolutie: 203 x 203 DPI
Mediadikte: 0.08 - 0.18 mm
Maximum roll diameter: 127 mm
Printtechnologie: Thermo transfer
Paginabeschrijving talen: EPL
Afmetingen (B x D x H): 135 x 241 x 178 mm
Losse vellen, maximum uitvoer: 39 "
Ingebouwde streepjescodes: Code 39, Code 49, Code 93, MaxiCode, PDF417, Postnet, QR Code, UPC-A, UPC-E
Printsnelheid (metrisch): 102 mm/sec
Bedrijfstemperatuur (T-T): 5 - 41 °C
Relatieve vochtigheid in bedrijf (V-V): 10 - 90 procent
Core diameter: 25.4 mm
Maximum media lengte: 991 mm
USB 1.1 poort(en): 1
Temperatuurbereik voor opslag (T-T): -40 - 140 °F
Media dikte (imperiale): 0.003 - 0.007 "

Heb je hulp nodig?

Als je hulp nodig hebt met Zebra TLP 2824 Plus stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Labelprinter Zebra

Handleiding Labelprinter

Nieuwste handleidingen voor Labelprinter