Zebra LP 2824 Handleiding

Zebra Labelprinter LP 2824

Lees hieronder de 📖 handleiding in het Nederlandse voor Zebra LP 2824 (56 pagina's) in de categorie Labelprinter. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/56

Zebra®TM

LP 2824

Part #980481-001 | Rev. A

User Guide

Desktop Printer

ii 980481-001A

Proprietary Statement

This manual contains proprietary information of Zebra Technologies Corporation. It is intended solely for the information and use of parties operating and

maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose

without the expressed written permission of Zebra Technologies Corporation.

Product Improvements

Continuous improvement of products is a policy of Zebra Technologies Corporation. All specifications and signs are subject to change without notice.

FCC Compliance Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

■Reorient or relocate the receiving antenna.

■Increase the separation between the equipment and the receiver.

■Connect the equipment into an outlet on a circuit different than that to which the receiver is connected.

■Consult the dealer or an experienced Radio/TV technician for help.

NOTE: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to insure compliance.

“The user is cautioned that any changes or modifications not expressly approved by Zebra Technologies Corporation could void the user’s authority to operate

the equipment.”

Liability Disclaimer

Zebra Technologies Corporation takes steps to assure that its published Engineering specifications and Manuals are correct; however, errors do occur. Zebra

Technologies Corporation reserves the right to correct any such errors and disclaims liability resulting therefrom.

No Liability for Consequential Damage

In no event shall Zebra Technologies Corporation or anyone else involved in the creation, production, or delivery of the accompanying product (including

hardware and software) be liable for any damages whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss of

business information, or other pecuniary loss) arising out of the use of or the results of use of or inability to use such product, even ifZebra Technologies

Corporation has been advised of the possibility of such damages. Because some states do not allow the exclusion or limitation of liability for consequential or

incidental damages, the above limitation may not apply to you.

Trademarks

The Zebra logo and the zebra head design are both registered trademarks and LP 2824 is a service mark of ZIH Corp. Windows and MS-DOS are registered

trademarks of Microsoft Corp. All other marks are trademarks or registered trademarks of their respective holders.

Copyrights

This copyrighted manual and the label printer described herein are owned by Zebra Technologies Corporation. All rights are reserved. Unauthorized

reproduction of this manual or the software in the label printer may result in imprisonment of up to one year and fines of up to $10,000 (17 U.S.C.506).

980481-001A iii

Product specificaties

Merk:	Zebra
Categorie:	Labelprinter
Model:	LP 2824
Kleur van het product:	Grijs
Gewicht:	1200 g
Breedte:	91 mm
Diepte:	190 mm
Hoogte:	173 mm
Stroomvoorziening:	100-240 VAC, 50-60 Hz
Intern geheugen:	0.128 MB
Printsnelheid:	4 lpm
Printtechnologie:	Direct thermisch
Standaard interfaces:	RS-232,USB 1.1
Maximaal intern geheugen:	1 MB
Afmetingen (B x D x H):	91 x 190 x 173 mm
PC connected:	Ja
Printsnelheid (metrisch):	102 mm/sec
Maximale label breedte:	558 mm