Zagg Coda Pop Handleiding

Zagg Cradle/docking station Coda Pop

Lees hieronder de 📖 handleiding in het Nederlandse voor Zagg Coda Pop (2 pagina's) in de categorie Cradle/docking station. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Charging Your Coda Pop

Your CODA POP comes with a battery that

packs a punch and can keep your music flowing until

the party’s over. When you do need to charge it,

simply follow these steps:

1. Plug the included power cord into the CODA

POP’s DC jack.

2. Plug the USB end of the included charging

cable into the charging device you prefer (ZAGG

Sparq, your computer, a wall outlet converter, etc.).

3. While your CODA POP is charging, the

LED light will be red.

1. Restart your music device.

2. Turn your CODA POP off and back on.

You should see the , if not, LED light illuminate

charge your CODA POP. Note: If you are powering

off from Bluetooth

mode, make sure you hear the

power down tone. If you don’t hear it, charge your CODA

POP.

3. After charging, turn your CODA POP on. If the LED

light still does not illuminate, and your speaker doesn’t

operate correctly, please contact ZAGG’s customer support.

4. Forget and re-pair your CODA POP. On your

device select: SETTINGS GENERAL

BLUETOOT ONH .

If you see listed as an “CODA POP”

available device, select it and

choose to have

SPEAKER

Warranty Registration

Your CODA POP speaker comes with a

one-year manufacturer’s warranty. In order to

activate the warranty, you must register your CODA

POP as well as keep your purchase receipt. If you

purchased your CODA POP from ZAGG.com,

ZAGG® has already registered it and has a copy of

your proof of purchase. iFrogz

is a ZAGG

Inc brand.

NEED MORE HELP? PLEAS E S EE OUR

FAQ SECTION AT: www.ZAGG.com/faq

Powering On and Off Listening Via AUX

To turn your CODA POP on, slide the simply

selector switch on the bottom to Bluetooth® or

AUX.

If you choose Bluetooth, the LED light will show red, then, as the

CODA POP powers up, you will hear the pop tab sound

indicating it is ready to pair. The LED light will also begin

alternating between red and blue.

To turn your CODA POP off from Bluetooth

mode, simply slide the selector switch to

OFF. The CODA POP will down power

with a refreshing fizz tone.

If you are enjoying your CODA POP in Bluetooth

mode and want to switch to AUX, you must first

power the CODA POP down completely and wait for

the power down tone to sound. Only after the power

down tone has sounded can you then switch to AUX

mode and begin enjoying your music via a 3.5mm cable.

If you wish to switch from AUX to Bluetooth

, you can

simply slide the selector switch to Bluetooth

and pair the CODA POP to your music

device. You do not need to wait for it to

power down.

If you choose to turn on

your CODA POP using the AUX

option, no tone will sound. Simply

plug your 3.5mm cable into the speaker

and your music device, slide the selector switch

to AUX, and then begin enjoying your music.

To turn your CODA POP off from AUX mode, simply

slide the selector switch to OFF. No tone will sound.

Pairing your CODA POP with your music device is

quick and easy. It should only need to be paired once

using the following directions. If the connection

between the CODA POP and your device

is ever lost, simply repeat

these steps.

Pairing Your CODA POP

To enjoy the powerful sounds of your CODA POP

using the AUX mode, simply follow these steps:

Plug a 3.5mm cable into the AUX port.

Connect your music device by using the other end

of the 3.5mm cable (or AUX cable).

Slide the selector switch to AUX.

Make sure both ends of the 3.5mm

cable are seated properly and begin

playing your music from your device.

Enjoy.

Make sure your device’s

Bluetooth

connection is enabled.

You can do this on many devices by

accessing the menu then SETTINGS

choosing GENERAL BLUETOOTH

ON.

Turn your CODA POP on by sliding the

selector switch to the Bluetooth

option. Wait for

the pop tab sound that indicates it is ready to pair.

Your music device will show “CODA POP” as an

available device. Select this option to begin pairing.

When the CODA POP is paired with your

device, the periodically.LED light will flash blue

Enjoy the refreshing sounds

of your music.

To reach a trained customer service

representative, please use one of the following:

• ZAGG.com/support/contact.php

• questions@zagg.com

• 1-800-700-ZAGG [9244]

• 00-1-801-839-3906 for international customers

NASDAQ: ZAGG | MADE IN CHINA

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference

received, including interference that may

cause undesired operation.

your device forget the

speaker.

5. Re-pair your CODA POP with your device by

sliding the selector switch to Bluetooth

6. Your music device should display “CODA POP” as an

available device. Select it.

7. If your music device gives you an error message, repeat the

pairing process*.

If you continually receive the same error message during pairing,

or the above steps don’t work, please contact ZAGG’s customer

support for assistance.

For more help please see our FAQ at:

www.ZAGG.com/faq

4. When charging is

complete the LED light will

turn blue. It typically takes 2-3 hours for

the CODA POP to charge fully.

5. When your CODA POP speaker fully charged,

provides 2-3 hours of continuous music.

Your CODA POP also allows you to take calls

hands-free. Its built-in microphone transmits your

voice cleanly while the Coda Pop speaker projects

their voice crisply and clearly. To take a call on

your CODA POP, follow these steps:

Switching Between

Bluetooth

and AUX Modes

Conference Calls

FRONT PAGE 5 PAGE 10PAGE 1 PAGE 2 PAGE 3 PAGE 4 PAGE 6 PAGE 7 PAGE 8 PAGE 9 BACK

DIE LINE

FOLD LINE

Product specificaties

Merk:	Zagg
Categorie:	Cradle/docking station
Model:	Coda Pop
Kleur van het product:	Blauw
Hoogte:	50.8 mm
Snoerlengte:	1.2 m
Bluetooth:	Ja
Connectiviteitstechnologie:	Bedraad en draadloos
Diameter:	41.28 mm
Type stroombron:	Batterij/Accu
Gemiddeld vermogen:	- W
Aantal luidsprekers:	1
Ingebouwde microfoon:	Ja
Aanbevolen gebruik:	Overige
Impedantie:	32 Ohm
3,5mm-connector:	Ja
Backlight:	Nee
Geschikt voor buitengebruik:	Ja
Audio-uitgangskanalen:	1.0 kanalen
Speaker plaatsing:	Tafelblad/Boekenplank
Aantal drivers:	1
Diameter driver:	40 mm
Frequentiebereik:	20 - 20000 Hz
Gevoeligheid:	102 dB
Soort magneet:	Neodymium
AUX ingang:	Ja
Bereik van Bluetooth:	10 m
Luidspreker soort:	1-weg
Opladen via USB:	Ja
Hands-free stand:	Ja
Productontwerp:	Cylinder
Wifi:	Nee
Type product:	Mono draadloze luidspreker