Yorkville YXL10P Handleiding

Yorkville Speaker YXL10P

Lees hieronder de 📖 handleiding in het Nederlandse voor Yorkville YXL10P (15 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/15
YXL SERIES
YXL10P
YXL12P
YXL15P
BI-AMP POWERED
LOUDSPEAKER
ENCLOSURES
OWNER'S MANUAL
MANUEL DE L'UTILISTEUR
1
YXL SERIES
The YXL Series o󰀨ers our best ratio of power, performance and value for full-range active
loudspeaker enclosures. Providing 500 watts (1000 watts peak) with e󰀩cient speaker
components, the YXL Series is extremely loud for their sizes. There are several di󰀨erent input
options for connecting audio sources including Bluetooth , microphones, musical instruments ®
and other audio sources. While the onboard audio mixer may has a minimum of controls, it's
tremendously useful and provides great versatility. The YXL Series can be easily used in any
situation, close to walls, oors, in arrays with multiple enclosures and as a stage monitor. With all
these options, the YXL Series is the solution for all of your audio applications.
Up to 16 YXL Series Powered speakers can be linked together with a maximum of three
‘mixers’ active at any one time. This means up to 6 mic sources and 6 instrument/line sources
are available in an array of three or more enclosures. The Master level controls are used to
adjust the levels of individual powered enclosures. This is invaluable in applications where large
numbers of enclosures are used such as in clusters or in trade show applications (or when YXL
Series powered speakers are used as repeater enclosures or side-ll).
NOTE: Our Link system allows additional powered YXL Series powered speakers to be driven
from a single source (up to a maximum of 16 YXL Series powered enclosures). A maximum of
3 mixers can be used when Linking YXL Series powered enclosures
USER TIP: When a pair of YXL Series powered speakers are Linked you can use both mixers
integrated on each cabinet.
A 100 Hz high pass lter can be activated to make it easier to add subwoofers to the YXL-
Series powered enclosures. This allows the speakers to be used more e󰀩ciently with almost
any active subwoofer.
• 1000 watts (peak) 500 watts (program)
• Superior DSP processing with component protection
• 10, 12 or 15-inch woofers with 2-inch voice coils
• 1-inch HF compression drivers
• 90° x 60° HF dispersion Horns
• Dual purpose full-range and wedge monitor speaker
• Ultra-clear reproduction throughout the whole audio bandwidth
• Lightweight and high e󰀩ciency bi-amped power module
• Low distortion and high power-handling 10, 12 and 15-inch woofers
• Recessed control panel
• Master Level control with Activity indicator (cabinet level adjustment)
• 3 Performance modes, Concert, Club and Monitor
• Defeatable 3 channel mixer with level controls and Clip indicators
• Bluetooth input / streaming, not a󰀨ected by Mixer Defeat®
• 2 Microphone Inputs with level control and phantom power
• 1/4-inch TRS Instrument and Line Inputs
• 1/8-inch Aux Input for connecting mono or stereo audio sources
• An XLR Main In and Link output for easy connection and looping
• Selectable Sub lter (HPF) for connecting a subwoofer
• ABS / Polypropylene cabinet construction
• Tough, full length metal grille
2
YXL SERIES
The AC power switch on the rear panel turns
the power On or O󰀨. The Mode LED turns on to
indicate power is supplied to the unit.
The Mode Selector applies specic EQ and
tone settings for the YXL Series powered
enclosure, e󰀨ectively custom tailoring the
speaker for any environment.
Concert: Allows instruments and vocals to
be equally and naturally reproduced which
is best for live performance.
Club: Boosted bass and enhanced highs
make this mode ideal for music playback.
Monitor: Optimized for use as a stage
monitor and the human voice while
minimizing feedback.
The Master control sets the level of ALL sound
coming out of the YXL Series enclosure. If there
are multiple YXL Series speakers in a system,
the volume of each speaker is individually set by
using each enclosure’s Master control.
This LED illuminates when audio signal is present from all sources being sent to the Master.
NOTE: If the Master is turned to Min, the Activity LED will not illuminate.
The Yorkville YXL Series is capable of receiving streaming audio over Bluetooth® from devices
such as smart phones, tablets and laptops. Pairing your device with the YXL Series is simple and
gives you the freedom to play your music wirelessly.
To pair your Bluetooth® device, depress the Bluetooth® switch for approximately 4-seconds. The
blue LED will ash to indicate the YXL speaker is ready to be paired.
Bluetooth® can be used along with the Link feature only when the rst cabinet in the Link chain is
paired and the mixer is enabled. Pair with the rst cabinet using Bluetooth® and leave the others
unpaired. Then, use the appropriate XLR cables to Link between the multiple cabinets by wire
through the Link/left channel connection. If Stereo Bluetooth is desired, set the “paired” cabinet ®
to Stereo Mode, the right channel will play on the paired cabinet and the Left signal will play on the
cabinet connected to the L/Link jack.
The Mixer Enable switch turns the onboard mixer ‘on’ or ‘o󰀨.’ When the Mic or Line inputs are
used, this switch must be set to the ‘on’ position. If these inputs are not being used, the mixer
should be turned ‘o󰀨,’ this will help prevent the mixer from contributing noise to the system.
The onboard mixer should not be used when a source other than another YXL Series powered
speaker (or similar) is connected to the LINK jack. Remember, a maximum of 3 mixers, in a
chain of enclosures, should be used! A much larger number of enclosures may be used with
the mixers disabled on the additional enclosures.
Clip Activity
M AS TE R
1Clip 2Clip 3
Aux InInstrument Line
Mic
Pairing: Hold
for 4 sec,
then release
Mixer Enable
100 Hz
L I N K
MA I N I n
Sub
I NO U TI NO U T
Mode
Stereo/Mono
Concert
Club
Monitor
M
i
n
M
a
x
M
i
n
M
a
x
M
i
n
M
a
x
M
i
n
M
a
x
Mic 9 0 Hz

Product specificaties

Merk: Yorkville
Categorie: Speaker
Model: YXL10P

Heb je hulp nodig?

Als je hulp nodig hebt met Yorkville YXL10P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker Yorkville

Yorkville

Yorkville NX12P Handleiding

5 September 2024
Yorkville

Yorkville EF10P Handleiding

29 Juli 2024
Yorkville

Yorkville Coliseum C120 Handleiding

9 Juli 2024
Yorkville

Yorkville NX35 Handleiding

25 Juni 2024
Yorkville

Yorkville C2891 Handleiding

25 Juni 2024
Yorkville

Yorkville EXM Mobile 8 Handleiding

25 Juni 2024
Yorkville

Yorkville Coliseum C12W Handleiding

25 Juni 2024
Yorkville

Yorkville Coliseum C15W Handleiding

25 Juni 2024
Yorkville

Yorkville C12CW Handleiding

29 Mei 2024
Yorkville

Yorkville NX10C-2 Handleiding

28 Mei 2024

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Kramer

Kramer Tavor 8-Sub Handleiding

21 November 2024
Kramer

Kramer Galil 6-AW Handleiding

21 November 2024
Extron

Extron SM 28 Handleiding

21 November 2024
JBL

JBL RM10 Handleiding

20 November 2024
JBL

JBL Performance IS6 Handleiding

20 November 2024
JBL

JBL Power P-Kit Handleiding

20 November 2024
JBL

JBL Performance P941 Handleiding

20 November 2024
JBL

JBL Performance P52OWS Handleiding

20 November 2024
JBL

JBL Performance PC600 Handleiding

20 November 2024
JBL

JBL Performance IS6DT Handleiding

20 November 2024