Yamaha Waves WSG-Y16 V2 Handleiding

Yamaha Niet gecategoriseerd Waves WSG-Y16 V2

Lees hieronder de 📖 handleiding in het Nederlandse voor Yamaha Waves WSG-Y16 V2 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 183 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
1
WSG- Y16 (V1 and V2) Quick Setup Guide
Registration
You must register your WSG card- Y16 to obtain the software, the drivers, and any licenses needed.
To register your device, log into your Waves account at www.waves.com.
Software Download
Go to Waves.com > Downloads > Hardware Drivers, and select Yamaha.
Download the latest version for Mac or PC, as needed.
Run the installer and follow the onscreen instructions.
Connections
Insert the WSG- Y16 to your Yamaha console.
Connect the WSG card - Y16 to your computer.
If you are using just one WSG card- Y16 , connect it directly to your computer’s Gigabit Ethernet port
using the supplied cable.
If you are using several WSG- Y16 cards and/or multiple SoundGrid interfaces, computers, etc., connect
them all to a SoundGrid-compatible switch and connect the switch to your computer’s Ethernet port.
See http://www.waves.com/hardware/soundgrid-switches for a list of approved switches.
2
Recording/Playback
Your Waves SoundGrid application (SoundGrid Studio or MultiRack SoundGrid) must be open at all times
to configure the driver.
After installation, the Waves SoundGrid driver will appear as available in your DAW even before you
launch the Waves SoundGrid application.
1. Recording/Playback with the SoundGrid Studio Application
If you choose to use the SoundGrid Studio Application as your setup application, refer to the following
images for configuration.
The first time you run and configure your WSG- Y16 card, you may be prompted to update the firmware
of your device. Follow the onscreen instructions.
3
There are also built-in templates to assist you with configuration. Select the template that best meets
your setup. For recording and playback, select 4x Y16 -REC PB Standalone.
Finally, check in the PATCH tab that your is patched to the driver. If youWSG card- Y16 ’ve selected one
of the preset templates, this should be all done. If you’ve adjusted the number of driver channels, you
may need to patch additional channels.


Product specificaties

Merk: Yamaha
Categorie: Niet gecategoriseerd
Model: Waves WSG-Y16 V2

Heb je hulp nodig?

Als je hulp nodig hebt met Yamaha Waves WSG-Y16 V2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Yamaha

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd