Yamaha R-V502 Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Yamaha R-V502 (40 pagina's) in de categorie AV-Receiver. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/40
OWNERā€™S MANUAL
MODE Dā€™EMPLOI
MANUAL DE INSTRUCCIONES
Natural Sound AV Receiver
RĆ©cepteur audiovisuel ā€œSon Naturelā€
Receptor AV de Sonido Natural
R-V702
R-V502
Thank you for selecting this YAMAHA AV receiver.
Nous vous remercions dā€™avoir portĆ© votre choix sur ce rĆ©cepteur audiovisuel YAMAHA.
Muchas gracias por haber adquirido este receptor AV YAMAHA.
1 Read Instructions ā€“ All the safety and operating
instructions should be read before the unit is operated.
2Retain Instructions ā€“ The safety and operating instructions
should be retained for future reference.
3Heed Warnings ā€“ All warnings on the unit and in the
operating instructions should be adhered to.
4Follow Instructions ā€“ All operating and other instructions
should be followed.
5Water and Moisture ā€“ The unit should not be used near
water ā€“ for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming
pool, etc.
6Carts and Stands ā€“ The unit should be used only with a
cart or stand that is recommended by the
manufacturer.
6A A unit and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause
the unit and
cart combination to overturn.
7Wall or Ceiling Mounting ā€“ The unit should be mounted to
a wall or ceiling only as recommended by the
manufacturer.
8Ventilation ā€“ The unit should be situated so that its
location or position does not interfere with its proper
ventilation. For example, the unit should not be situated
on a bed, sofa, rug, or similar surface, that may block the
ventilation openings; or placed in a built-in installation,
such as a bookcase or cabinet that may impede the ļ¬‚ow
of air through the ventilation openings.
9Heat ā€“ The unit should be situated away from heat
sources such as radiators, stoves, or other appliances
that produce heat.
10 Power Sources ā€“ The unit should be connected to a
power supply only of the type described in the operating
instructions or as marked on the unit.
11 Power-Cord Protection ā€“ Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the unit.
12 Cleaning ā€“ The unit should be cleaned only as
recommended by the manufacturer.
13 Nonuse Periods ā€“ The power cord of the unit should be
unplugged from the outlet when left unused for a long
period of time.
14 Object and Liquid Entry ā€“ Care should be taken so that
objects do not fall into and liquids are not spilled into the
inside of the unit.
15 Damage Requiring Service ā€“ The unit should be serviced
by qualiļ¬ed service personnel when:
A. The power-supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has been spilled into the
unit; or
C. The unit has been exposed to rain; or
D. The unit does not appear to operate normally or
exhibits a marked change in performance; or
E. The unit has been dropped, or the cabinet damaged.
16 Servicing ā€“ The user should not attempt to service the unit
beyond those means described in the operating
instructions. All other servicing should be referred to
qualiļ¬ed service personnel.
17 Power Lines ā€“ An outdoor antenna should be located
away from power lines.
18 Grounding or Polarization ā€“ Precautions should be taken
so that the grounding or polarization is not defeated.
SAFETY INSTRUCTIONS
R ISK O F E LE C T R IC SH O C K
D O N O T O P E N
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning ļ¬‚ash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated ā€œdangerous
voltageā€ within the productā€™s
enclosure that may be of suļ¬ƒcient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
ā€¢Explanation of Graphical Symbols
CAUTION
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.
1
English
Note to CATV system installer:
This reminder is provided to call the CATV system
installerā€™s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, speciļ¬es that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical.
SPECIAL NOTES FOR FCC COMPOSITE
DEVICE (for US customers only)
This device is a composite system. The digital device
component may not cause harmful interference.
19 For US customers only:
Outdoor Antenna Grounding ā€“ If an outside antenna is
connected to this unit, be sure the antenna system is
grounded so as to provide some protection against
voltage surges and built-up static charges. Article 810 of
the National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode.
EXAMPLE OF ANTENNA GROUNDING
MAST
GROUND
CLAMP
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810ā€“20)
GROUNDING CONDUCTORS
(NEC SECTION 810ā€“21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
ELECTRIC
SERVICE
EQUIPMENT
NEC ā€“ NATIONAL ELECTRICAL CODE
1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modiļ¬cations not expressly approved by
Yamaha may void your authority, granted by the FCC, to
use the product.
2. IMPORTANT : When connecting this product to
accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product
MUST be used. Follow all installation instructions.
Failure to follow instructions could void your FCC
authorization to use this product in the USA.
3. NOTE : This product has been tested and found to
comply with the requirements listed in FCC Regulations,
Part 15 for Class ā€œBā€ digital devices. Compliance with
these requirements provides a reasonable level of
assurance that your use of this product in a residential
environment will not result in harmful interference with
other electronic devices.
This equipment generates/uses radio frequencies and, if
not installed and used according to the instructions
found in the users manual, may cause interference
harmful to the operation of other electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product
is found to be the source of interference, which can be
determined by turning the unit ā€œOFFā€ and ā€œONā€, please try
to eliminate the problem by using one of the following
measures:
Relocate either this product or the device that is being
aļ¬€ected by the interference.
Utilize power outlets that are on diļ¬€erent branch (circuit
breaker or fuse) circuits or install AC line ļ¬lter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
FCC INFORMATION (for US customers only)
YAMAHA and the Electronic Industries Associationā€™s
Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring
or distortion ā€“ and, most importantly, without aļ¬€ecting your
sensitive hearing.
Since hearing damage from loud sounds is often
undetectable until it is too late, YAMAHA and the
Electronic Industries Associationā€™s Consumer
Electronics Group recommend you to avoid
prolonged exposure from excessive volume levels.
We Want You Listening For A Lifetime (for US customers only)


Product specificaties

Merk: Yamaha
Categorie: AV-Receiver
Model: R-V502

Heb je hulp nodig?

Als je hulp nodig hebt met Yamaha R-V502 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden