Yamaha MCX-SP10 Handleiding
Yamaha
Luidsprekersysteem
MCX-SP10
Lees hieronder de đź“– handleiding in het Nederlandse voor Yamaha MCX-SP10 (15 pagina's) in de categorie Luidsprekersysteem. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/15
Speaker System
Systeme D’enceintes
MCX-SP10
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
English
PRECAUTIONS
•
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
• Install the speaker in a cool, dry, clean place – away
from windows, heat sources, sources of excessive
vibration, dust, moisture and cold. Avoid sources of
humming (transformers, motors). To prevent fire or
electrical shock, do not expose the speaker to rain or
water.
• To prevent the enclosure from warping or discoloring,
do not place the speaker where it will be exposed to
direct sunlight or excessive humidity.
• Do not place the following objects on the speaker:
Glass, china, etc.
If glass etc. falls by vibrations and breaks, it may
cause personal injury.
A burning candle etc.
If the candle falls by vibrations, it may cause fire
and personal injury.
A vessel with water in it
If the vessel falls by vibrations and water spills, it
may cause damage to the speaker, and/or you may
get an electric shock.
• Do not place the speaker where foreign objects such as
water drips might fall. It might cause a fire, damage to
the speaker, and/or personal injury.
• Do not place the speaker where it is liable to be
knocked over or struck by falling objects. Stable
placement will also ensure better sound performance.
Read this before using the speaker.
Speaker cable (5 m) x 2
• Placing the speaker on the same shelf or rack as a
turntable can result in feedback.
• Never put a hand or a foreign object into the port
located on the rear of the speaker as this might cause
personal injury and/or damage to the speaker.
• When moving the speaker, do not hold the port as it
might cause personal injury and/or damage to the
speaker.
• Any time you note distortion, reduce the volume
control on your MCX-A10 to a lower setting. Never
allow your MCX-A10 to be driven into “clipping”.
Otherwise the speaker may be damaged.
• When using a component with a rated output power
higher than the nominal input power of the speaker,
care should be taken never to exceed the speaker’s
maximum input.
• Do not attempt to clean the speaker with chemical
solvents as this might damage the finish. Use a clean,
dry cloth.
• Do not attempt to modify or fix the speaker. Contact
qualified YAMAHA service personnel when any service
is needed. The cabinet should never be opened for any
reasons.
• Secure placement or installation is the owner’s
responsibility.
YAMAHA shall not be liable for any accident caused
by improper placement or installation of the speaker.
Pad x 4
SUPPLIED ACCESSORIES
After unpacking, check that the following parts are supplied.
1
4. Insert 2 self-tapping screws (diameter:
3.5 to 4 mm) into the wall, 40 mm apart.
5. Mount the speaker on the screws by
positioning it so that the screws on the
wall fit snugly into the holes on the
mounting bracket.
Cautions
• This speaker weighs 1.2 kg (2 lbs 10 oz). Do not mount it
on thin plywood or a wall with soft surface material. If
mounted, the screws may come loose from the flimsy
surface and the speaker may fall. This damages the speaker
and may cause personal injury.
• Do not use nails, adhesives, or other unstable materials to
mount the speakers. Long-term use and vibrations may
cause it to fall.
• To avoid accidents resulting from tripping over loose
speaker cable, fix it to the wall.
• This speaker features a magnetically shielded design, but
there is still a chance that placing it too close to a TV set
might impair picture color. Should this happen, move the
speaker away from the TV set.
Follow the procedure below to remove the speaker
stand before attempting to mount it on a wall.
1. Use a screwdriver to loosen the screws
attaching the stand to the speaker.
2. Remove the stand from the speaker,
taking care to slide out the mounting
pins that hold the stand to the bottom of
the speaker.
3. Attach the pads to the rear of the
speaker, as illustrated.
MOUNTING THE SPEAKERS ON A WALL
Mounting bracket
Pad
40mm
4mm 20mm or more
2
Product specificaties
| Merk: | Yamaha |
| Categorie: | Luidsprekersysteem |
| Model: | MCX-SP10 |
Heb je hulp nodig?
Als je hulp nodig hebt met Yamaha MCX-SP10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Luidsprekersysteem Yamaha
17 Augustus 2022
15 Augustus 2022
17 Februari 2022
17 Augustus 2022
25 Februari 2022
15 Augustus 2022
17 Augustus 2022
17 Augustus 2022
16 Augustus 2022
15 Augustus 2022
Handleiding Luidsprekersysteem
- Luidsprekersysteem Sony
- Luidsprekersysteem Samsung
- Luidsprekersysteem Panasonic
- Luidsprekersysteem AEG
- Luidsprekersysteem Grundig
- Luidsprekersysteem JBL
- Luidsprekersysteem Onkyo
- Luidsprekersysteem Pioneer
- Luidsprekersysteem Toshiba
- Luidsprekersysteem American Audio
- Luidsprekersysteem Auna
- Luidsprekersysteem BW
- Luidsprekersysteem Harman Kardon
- Luidsprekersysteem Humax
- Luidsprekersysteem Ion
- Luidsprekersysteem Paradigm
- Luidsprekersysteem Sonos
- Luidsprekersysteem Tevion
- Luidsprekersysteem Jamo
Nieuwste handleidingen voor Luidsprekersysteem
1 Juli 2023
14 Augustus 2023
14 Augustus 2023
1 Juli 2023
1 Juli 2023
1 Juli 2023
1 Juli 2023
1 Juli 2023
1 Juli 2023
1 Juli 2023