Yamaha Clavinova CLP-625 Handleiding

Yamaha Piano Clavinova CLP-625

Lees hieronder de đź“– handleiding in het Nederlandse voor Yamaha Clavinova CLP-625 (8 pagina's) in de categorie Piano. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
EN
MIDI Reference CLP -625
Table of Contents
MIDI Functions .............................................................. 2
MIDI Transmit/Receive Channel Selection .................................2
Local Control ON/OFF................................................................2
Program Change ON/OFF..........................................................3
Control Change ON/OFF............................................................3
MIDI Data Format.......................................................... 4
MIDI Implementation Chart ........................................... 8
CLP-625 MIDI Reference 2
MIDI Functions
When this instrument and a computer are connected with a USB cable, MIDI communication can be performed. The
explanations here cover the settings necessary for performing MIDI communication between both devices.
For instructions on how to connect this instrument to the computer, refer to the “Computer-related Operations”
downloadable from the Yamaha Manual Library.
MIDI transmission channels
in Dual
Voice 1 data is transmitted on
the channel set up here.
Voice 2 data is transmitted on
the next greater channel
number relative to the specified
channel.
MIDI receive channel = ALL:
This allows simultaneous
reception of different parts on
all 16 MIDI channels. When
SMF Song data is played back
on a computer with the Voice of
this instrument, this setting is
selected. However, when a
Voice not available on the
instrument is specified, the
playback sound may not be
suitable.
MIDI receive channel = 1+2:
This allows simultaneous
reception on channels 1 and 2
only. When SMF Song data is
played back on a computer,
this setting is selected for
playing back only data of
channels 1-2 on this instrument.
Panel settings (Voices, etc.) of
this instrument will not be
affected by MIDI messages
received from a computer.
Data for the demo song and
piano preset songs cannot be
transmitted via MIDI.
In order to perform MIDI communication between this instrument and a computer, it is
necessary to match the corresponding MIDI transmit and receive channels. By setting the
MIDI transmit channels on this instrument, the setting of the keyboard or pedal performance
or the program change can be transmitted over the channel number corresponding to a
specified channel on the computer. By properly setting the MIDI receive channels on this
instrument, only data of the specified channel will be played back in the MIDI data received
from the computer.
Setting the Transmit Channel
While holding down [DEMO/SONG] and [PIANO/VOICE], press the C1 – E2 keys.
Default setting
MIDI transmission channel = 1
Setting the Receive Channel
While holding down [DEMO/SONG] and [PIANO/VOICE], press the C4 – F5 keys.
Default setting
MIDI receive channel = ALL
“Local Control” refers to the fact that, normally, the keyboard of the instrument controls its internal tone generator,
allowing the internal voices to be played directly from the keyboard. This situation is “Local Control On,” since the internal
tone generator is controlled locally by its own keyboard. Local Control can be turned off as desired, so that the keyboard
of the instrument does not play the internal voices.
Default setting
ON
While holding down [DEMO/SONG] and [PIANO/VOICE], press the C6 key. Pressing the
C6 key repeatedly toggles between Local Control On and Off.
MIDI Transmit/Receive Channel Selection
C1 C4
E2 F5
11 14 169
5 6 8 10 12 13 15
OFF
31
742 11 14 169
5 6 8 10 12 13 15
1+2
ALL
31
742
Transmit Channel
(C1 – E2)
Receive Channel
(C4 – F5)
Local Control ON/OFF
C6
CLP-625 MIDI Reference 3
MIDI Functions
The information related to Voice changes is called “program change” in MIDI. Sending and receiving program change
messages can be enabled or disabled as desired on this instrument. For example, if the relevant transmit and receive
parameters are set to ON, Voice change information in this instrument can be transmitted to or received from a computer.
(However, the Voice as played from the keyboard is maintained and does not change.)
For information on program
change numbers for each of
the Voices of the instrument,
refer to page 4.
Default setting
ON
While holding down [DEMO/SONG] and [PIANO/VOICE], press the C#6 key. Pressing
the C#6 key repeatedly toggles between Local Control On and Off.
Information related to non-note expressive changes, such as the use of a sustain pedal, is called “control change” in
MIDI. Sending and receiving control change messages can be enabled or disabled as desired on this instrument. For
example, if the relevant transmit and receive parameters are set to ON, pedal performance information on this instrument
can be transmitted to or received from a computer. (However, the performance of pedals and other controls as played
from the instrument is maintained and does not change.)
For information on control
changes that can be used with
the instrument, refer to page 4.
Default setting
ON
While holding down [DEMO/SONG] and [PIANO/VOICE], press the D6 key. Pressing the
D6 key repeatedly toggles between Local Control On and Off.
Program Change ON/OFF
C#6
Control Change ON/OFF
D6


Product specificaties

Merk: Yamaha
Categorie: Piano
Model: Clavinova CLP-625

Heb je hulp nodig?

Als je hulp nodig hebt met Yamaha Clavinova CLP-625 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden