Yamaha A-U671 Handleiding

Yamaha Receiver A-U671

Lees hieronder de 📖 handleiding in het Nederlandse voor Yamaha A-U671 (20 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

Integrated Am p lifi e r

OWNER’S MANUAL

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

i En

1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future

reference.

2 Install this sound system in a well ventilated, cool, dry, clean place - away from direct sunlight, heat

sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum

clearances.

Top: 10 cm (4 in), Rear: 10 cm (4 in), Sides: 10 cm (4 in)

3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming

sounds.

4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an

environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit,

which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to

liquid dripping or splashing. On the top of this unit, do not place:

– Other components, as they may cause damage and/or discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user

and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation.

If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all connections are complete.

8 Do not operate this unit upside-down. It may overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is

dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held

responsible for any damage resulting from use of this unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power cable and outdoor antennas disconnected from a wall

outlet or this unit during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any service

is needed. The cabinet should never be opened for any reasons.

15 When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power

plug from the wall outlet.

16 Be sure to refer to the “Troubleshooting” section for common operating errors before concluding that

this unit is faulty.

17 Before moving this unit, press A to set it to standby mode and disconnect the AC power plug from the

wall outlet.

18 Condensation will form when the surrounding temperature changes suddenly. Disconnect the power

cable from the outlet, then leave this unit alone.

19 When using this unit for a long time, this unit may become warm. Turn the power off, then leave this

unit alone for cooling.

20 Install this unit near the AC outlet and where the AC power plug can be reached easily.

21 The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. When you dispose

of batteries, follow your regional regulations.

22 Excessive sound pressure from earphones and headphones can cause hearing loss.

■Notes on remote controls and batteries

• Do not spill water or other liquids on the remote control.

• Do not drop the remote control.

• Do not leave or store the remote control in the following conditions:

– places of high humidity, such as near a bath

– places of high temperatures, such as near a heater or stove

– places of extremely low temperatures

– dusty places

• Insert the battery according to the polarity markings (+ and –).

• Change all batteries if you notice the following conditions:

– the operation range of the remote control narrows

– the transmit indicator does not flash or is dim

• If the batteries run out, immediately remove them from the remote control to prevent an explosion or acid

leak.

• If you find leaking batteries, discard the batteries immediately, taking care not to touch the leaked

material. If the leaked material comes into contact with your skin or gets into your eyes or mouth, rinse it

away immediately and consult a doctor. Clean the battery compartment thoroughly before installing new

batteries.

• Do not use old batteries together with new ones. This may shorten the life of the new batteries or cause

old batteries to leak.

• Do not use different types of batteries (such as alkaline and manganese batteries) together. Specification

of batteries may be different even though they look the same. Danger of explosion may happen if

batteries are incorrectly replaced.

• Before inserting new batteries, wipe the compartment clean.

• Dispose of batteries according to your regional regulations.

• Keep batteries away from children. If a battery is accidentally swallowed, contact your doctor

immediately.

• When not planning to use the remote control for long periods of time, remove the batteries from the

remote control.

• Do not charge or disassemble the supplied batteries.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT

TO RAIN OR MOISTURE.

This unit is not disconnected from the AC power source as long as it is connected to the wall

outlet, even if this unit itself is turned off by A. This state is called the standby mode. In this

state, this unit is designed to consume a very small quantity of power.

The user shall not reverse engineer, decompile, alter, translate or disassemble the software used in

this unit, whether in part or in whole. For corporate users, employees of the corporation itself as

well as its business partners shall observe the contractual bans stipulated within this clause. If the

stipulations of this clause and this contract cannot be observed, the user shall immediately

discontinue using the software.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

ii En

■For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be

cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below.

The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is

hazardous if engaged in a live socket outlet.

■Special Instructions for U.K. Model

Note

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE

FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the

coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with the

letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the

terminal which is marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth terminal of the three pin plug.

Information for Users on Collection and Disposal of Old

Equipment and Used Batteries

These symbols on the products, packaging, and/or accompanying documents mean

that used electrical and electronic products and batteries should not be mixed with

general household waste.

For proper treatment, recovery and recycling of old products and used batteries,

please take them to applicable collection points, in accordance with your national

legislation and the Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save

valuable resources and prevent any potential negative effects on human health and

the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products and batteries,

please contact your local municipality, your waste disposal service or the point of

sale where you purchased the items.

[Information on Disposal in other Countries outside the European

Union]

These symbols are only valid in the European Union. If you wish to discard these

items, please contact your local authorities or dealer and ask for the correct method

of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it

complies with the requirement set by the Directive for the chemical involved.

We, Yamaha Music Europe GmbH hereby declare that this unit is in compliance with the essential

requirements and other relevant provisions of Directive 1999/5/EC.

Yamaha Music Europe GmbH

Siemensstr. 22-34 25462 Rellingen, Germany

Tel: +49-4101-303-0

Product specificaties

Merk:	Yamaha
Categorie:	Receiver
Model:	A-U671
Kleur van het product:	Zwart
Gewicht:	3300 g
Breedte:	314 mm
Diepte:	342 mm
Hoogte:	70 mm
Connectiviteitstechnologie:	Bedraad
Aantal USB 2.0-poorten:	1
Stroomverbruik (in standby):	0.4 W
Volumeregeling:	Draaiknop
Hoofdtelefoonuitgangen:	1
Bedoeld voor:	Thuis
Audio-uitgangskanalen:	- kanalen
Frequentiebereik:	10 - 40000 Hz
Signaal/ruis-verhouding:	95 dB
Totale harmonische vervorming (THD):	0.05 procent
Afstandsbediening inbegrepen:	Ja
AC-ingangsspanning:	100-240 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	30 W
Input sensitiviteit:	230 mV
Piekvermogen per kanaal:	70 W
Line inputs (RCA):	2