Yale SR-PC Handleiding

Yale Bewegingsdetector SR-PC

Lees hieronder de 📖 handleiding in het Nederlandse voor Yale SR-PC (2 pagina's) in de categorie Bewegingsdetector. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Description:

1) Learn/Test Button with LED

hold and release within 3 secs. Send test signal:

This is used when checking accessory range

(See Smart Home Alarm user manual).

hold for 10 secs+. Learn Send learn signal:

button LED will ﬂash when learn signal is sent.

2) Camera Flash

3) Camera

4) 2 x 1.5V AA Alkaline batteries

5) Cover tamper switch

Pack contents

• 1 x PIR Image Camera with batteries

• 4 x wall plugs & screws

Program your PIR before installation and test

afterwards. Please see your current Smart Home

Alarm user manual.

SPECIAL NOTE:

When inserting new batteries, the following are

disabled for 5 minutes.

• Tamper Switch

• Image will not be sent in the ﬁrst 5 minutes

Please make sure you do not trigger the PIR

Video Camera for 5 minutes before testing the

system.

Compatible with Yale Smart Home Alarms

(SR-range) ONLY.

PIR Image Camera

(SR-PC)

smart

Living

Programming & Installation

For more information on this product

and Yale Smart Living Range visit

www.yale.co.uk/smart-living

Consumer Support: info@yale.co.uk

The 2 year guarantee for this

Yale Smart Home Alarm Kit is

active from the date of purchase

(A copy of this guarantee is

available on our website).

Sleep Timer

The PIR features an automatic “sleep time” of

approximately 1 minute for power conservation.

After transmitting a detected motion, the PIR will

not retransmit for 1 minute. Any further motion

detected within this one-minute sleep period will

extend the sleep time by another minute.

LED indicator

Off Normal operation

LED ﬂash

(2 sec)

When motion is detected and the

LED ﬂashes for 2 seconds, this

indicates one of the following:

• Low battery

• Tamper switch activated

• PIR in test mode

WARNING:

When you delete the PIR Video Camera from

the system, please ensure the PIR batteries are

removed to avoid unnecessary drain.

Environmental conditions:

-10oc to 40oc , relative humidity 85%

non-condensing. Indoor use only

Radio:

2.4GHz

Motion Detection Range:

110o

Speciﬁcation

Operation

Note: Waste electrical products and batteries should not be disposed

of with household waste. Please recycle where facilities exist. Check

with your local authority or retailer for recycling advice.

Issue No. 1A

Information and illustrations are subject to change.

Yale reserves the right to alter the speciﬁcation and

product design at any time without notice.

Product specificaties

Merk:	Yale
Categorie:	Bewegingsdetector
Model:	SR-PC
Kleur van het product:	Wit
LED-indicatoren:	Ja
Connectiviteitstechnologie:	Draadloos
Montagewijze:	Muur
Accu/Batterij voltage:	1.5 V
Ondersteund aantal accu's/batterijen:	2
Type beeldsensor:	Passieve infraroodsensor (PIR)
Frequentie:	868 MHz
Batterijen inbegrepen:	Ja
Batterijtechnologie:	Alkaline
Type batterij:	AA