Xiaomi Yeelight Sunflower Handleiding

Xiaomi Verlichting Yeelight Sunflower

Lees hieronder de 📖 handleiding in het Nederlandse voor Xiaomi Yeelight Sunflower (3 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

Yeelight Sunower

User manual (English)

1/ 3

Ver: -1 SF

Yeelight sunower is a wireless, smart, scene lighng system. It can be installed into your home -Fi network, Wi

and all the bulbs form system with control box automaticallya . You may control the bulb to change their color

and brightness with smart device such smart phone or pad, also you may save the seng to a scene and recall as

it at next me Now the app supports iOS version 5.0+ and Android 2.3.3+. .

1. Starter pack

For the starter pack, there are 3 yeelight bulbs and 1 control box; it the base lighting system. is

1) T bulb he

The yeelight sunower bulb is a LED lighting bulb, in which there is a wireless sending/receiving component

working via Zigbee signal The bulb receives signals from s. control box changes color and brightness to what and

you want.

2) Control box

The control box is a LAN (local area network) to Zigbee bridge, which transforms the smart phone control

commands (Wi-Fi signals) to Zigbee signals. The Control box has one LAN socket, with which it can be connected

to your home Wi-Fi AP. When it boots up, an IP address will be assigned and your smart phone can search and

connect to it via Wi-Fi. The following gure shows the interfaces on control box.

2. Single pack

For the single , there is only one yeelight bulb in the package The single pack cannot be used independently, pack .

and it should be used to extend bulb number for a starter pack. Please refer to Extra bulb via single pack in

Installaon secon on how to extend.

LED inside

Wireless antennae area

Cap

Light diusing dome

Wireless indicator

LAN indicator

LAN interface

Power interface

Button

Introducon

Yeelight Sunower

User manual (English)

2/ 3

Ver: -1 SF

Aer you install all the components system is running, a wireless binding between the bulb and control box and

is created. In this manual, there are also operaons for you to unbind them.

1. Preparaon

1) There is a home Wi-Fi AP and your smart phone can connect to it;

2) Check the accessories, including LAN cable, an USB power cable and an USB power adapter.

2. Starter pack

1) Plug LAN cable into LAN interface of your Wi-Fi AP, and plug another end into control box;

2) Plug in the power cable.

The LAN indicator on control box will fast ash for several mes during network conguraon, then slow ash for

several mes during boong. When it boots up, the LAN indicator always on. During your control from smart is

phone, it will ash 3 mes when it gets a command.

3) Screw the bulb into mount base, then turn on the power.

When bulb is turned on, and it transmits messages with control box, the wireless indicator on control box will

show on.

3. Extra bulb via single pack

Screw the bulb into mount base, then turn on the power. Refresh the list on smart phone, it will show new

discovered bulbs.

If you have problems when install extra bulbs, especially when you get them from other control, try to restore

bulb to factory setng, or put them closer to control box to get better wireless signal. About restoring to factory

seing, see the operaon in advanced operation secon.

4. Advanced operaon

1) Restore control box to factory setng

Press down the buon on control box and hold it for 10 seconds, then release , both the LAN indicator and it

wireless indicator will fast ash for about 3 seconds. When all the 2 indicator LEDs shows on, the operaon is done.

The restore operaon will clean the bind info on control box, so the bulb list will be swept, you should reinstall

them. If the bulb is online when you do this operaon, it also be restored to factory seng.

2) Restore bulb to factory seng

Keep your bulb on for at least 30s, then turn it off, now you can do the restore operaon as following steps:

i) Turn bulb on, when it’s up and shows maximum white light, turn o immediately (less than 5 seconds);

ii) Repeat above step for 3 mes;

iii) Then turn on the bulb again, you could see bulb shows red/green/blue/white, it means the

Installaon

Yeelight Sunower

User manual (English)

3/ 3

Ver: -1 SF

operaon is successful.

5. Download APP

1) For iOS user, go to App Store and search yeelight. Please be aware that there are other yeelight app, such as

blue, you should use the one for sunower.

2) For Android user, please go to Google play and search yeelight, and the app icon is the same as iOS.

3) Yeelight.com website also provides the link for download.

1) Is the bulb bound with control box aer installaon?

Yes, the will be created aer installaon. If you want to move a bulb to another control box, you should binding

restore it to factory seng at the very beginning.

2) How to unbind bulb and control box?

See the operaon in Installation secon.

3) How to restore to factory seng?

See the operaon in Installation secon.

4) My Wi-Fi AP does not support SSDP scan, what should I do?

You can get the IP address via the conguraon page of the Wi-Fi AP, then ll the address in yeelight APP. The smart

phone app will connect this xed IP and do not try to scan automacally.

5) Bulb is turned on, but it shows oine on smart phone.

If you are install them, please make sure it’s restored to factory setng rst;

If you encounter this issue when you use them aer successful installaon, please check the distance between

bulb and control box, or check if there is wireless interference devices. This may aect the wireless signal and cause

data transmission error.

6) The bulb cannot be discovered when I install them.

Try to restore it to factory setng, see the operaon in Installaon secon, or put them closer to control box to get

beer wireless signal.

Quesons and Answers

Product specificaties

Merk:	Xiaomi
Categorie:	Verlichting
Model:	Yeelight Sunflower

Heb je hulp nodig?

Als je hulp nodig hebt met Xiaomi Yeelight Sunflower stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Verlichting Xiaomi

Xiaomi Yeelight Sunflower Handleiding

4 Februari 2023

Xiaomi Mi Motion-Activated Night Light Handleiding

14 Juni 2021

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

Livarno Lux IAN 107127 Handleiding

17 November 2024

Livarno Lux IAN 104775 Handleiding

17 November 2024

Livarno Lux IAN 282451 Handleiding

17 November 2024

Livarno Lux IAN 97740 Handleiding

17 November 2024

Livarno Lux IAN 88651 Handleiding

17 November 2024

Livarno Lux IAN 279394 Handleiding

17 November 2024

Livarno Lux IAN 279399 Handleiding

17 November 2024

Livarno Lux IAN 273025 Handleiding

17 November 2024

Livarno Lux IAN 106820 Handleiding

17 November 2024

Livarno Lux IAN 278008 Handleiding

17 November 2024