Xantech SMAUD01 Handleiding

Xantech Hifi systeem SMAUD01

Lees hieronder de 📖 handleiding in het Nederlandse voor Xantech SMAUD01 (8 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 74 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

- 1 -

INSTALLATION INSTRUCTIONS

Sensor Modules

SMAUD01, SMVID01, SMMAG01, SMLIT01, SMCC01, SMVLT01

DESCRIPTION

The Xantech Sensor Module product line provides several sensing solutions for a wide variety of

automation needs. Used in conjunction with Xantech’s award winning MRC platform*, source

management and control is easy and reliable. Also, the sensor modules can be used with the

CBCSM1 connecting block to provide a simple interface solution. The CBCSM1 can provide positive

and negative logic through its PULL UP and PULL DOWN connections.

(* MRC44, MRAUDIO4X4, MRC88, MRAUDIO8X8)

The Xantech Sensor Module product line is composed of six complete, easy to install packages.

SMAUD01 Audio Sensor Module

SMVID01 Video Sensor Module

SMMAG01 Magnetic and Current Sensor Module

SMLIT01 LED and Light Sensor Module

SMCC01 Contact Closure Sensor Module

SMVLT01 AC\DC Voltage Sensor Module

Each module comes with double-sided foam tape and mounting screws. Also, built into the sensor is

a convenient LED light that turns ‘on’ to indicate the sensor is in an ‘on’ condition.

SPECIFICATIONS

 Delay: Adjustable between 0 and 15 seconds.

 +12VDC, <50mA.

 1/8” (3.5mm) mini-plug, Tip: +12VDC, Ring: Signal, Sleeve: Ground.

 Sensor Module Dimensions: 3/4” W x 3 3/4” L x 3/4” H.

 Control Cable Length: Approx. 6 feet

 Sensor Cable** Length: 6.5’ SMAUD01, SMVID01

 Sensor Cable** Length: 5.0’ SMMAG01, SMLIT01

(** not applicable on the SMCC01, SMVLT01)

Xantech Corporation

13100 Telfair Avenue, 2/F

Sylmar, CA 91342

Installation Instructions, Sensor Modules

This document is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Xantech

Corporation.

Xantech Corporation shall not be liable for operational, technical, or editorial errors/omissions made in this document.

- 2 -

ADJUSTMENTS

Each sensor module has an adjustment for delay (between 0 and 15 seconds). The delay adjustment

determines the amount of time the sensor module remains “on” after the stimulus condition stops. For

instance, when SMVLT01 no longer sees a voltage that stimulated the sensor to the “on” condition,

the delay will determine when the sensor returns to the “off” condition.

Increase Decrease

Delay Clockwise Counter-Clockwise

Sensitivity Clockwise Counter-Clockwise

The sensitivity adjustment is found on all sensor modules except the SMCC01 and SMVLT01.

Increasing the sensitivity will make the sensor easier to ‘trip’. Decreasing the sensitivity makes the

sensor harder to ‘trip’.

- 3 -

INSTALLATION – SMAUD01: Audio Sensor Module

The SMAUD01 sensor module provides status feedback by monitoring the line-level audio

connection. The sensor head is placed in between and input and output audio signal. For instance,

the sensor head is placed between an amplifier and a CD player on either the right or left channel

audio cable.

SMAUD01 is intended for line-level signals only. Do not use with amplifier outputs or speaker volume

controls.

(1) Plug the 1/8” (3.5mm) mini-plug into the sensing controller (CBCSM1 and MRC platform

provides power to the sensor module). Sensing controller power should be off.

(2) Connect the sensor head on the output of the audio source.

(3) Connect the audio cables as you would normally do.

(4) Turn on the audio source output. (i.e. ‘play’ button on a CD player)

(5) Verify the SMAUD01 LED indicator is ‘on’.

(6) Turn off the audio source output. (i.e. ‘stop’ button on a CD player)

(7) Verify the SMAUD01 LED indicator is ‘off’.

(8) If the indicator is not ‘off’, then adjust the sensitivity until the LED just turns off.

(9) Repeat Steps 4 to 8 until both ‘on’ and ‘off’ conditions are satisfied.

Product specificaties

Merk:	Xantech
Categorie:	Hifi systeem
Model:	SMAUD01

Heb je hulp nodig?

Als je hulp nodig hebt met Xantech SMAUD01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Hifi systeem Xantech

Xantech XT-CAT-ARC-KIT Handleiding

3 Januari 2024

Xantech SMAUD01 Handleiding

3 Januari 2024

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem

Sven HA-950 Handleiding

20 December 2024

Atoll SDA300 Handleiding

18 December 2024

Atoll ST200 Handleiding

18 December 2024

Majority Boxworth DAB-624 Handleiding

16 December 2024

Majority Peterhouse Graduate Handleiding

16 December 2024

Omnitronic ZD-160B Handleiding

14 December 2024

Rotel RSP-1066 Handleiding

14 December 2024

ClearOne Connect Dante Handleiding

10 December 2024

Crystal Video Pro200 Handleiding

10 December 2024

Crystal Video CVW Beamlink-Quad Handleiding

10 December 2024