Worx WG385.9 Handleiding
Worx
Kettingzagen
WG385.9
Lees hieronder de 📖 handleiding in het Nederlandse voor Worx WG385.9 (48 pagina's) in de categorie Kettingzagen. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/48
Cordless Chainsaw
Tronçonneuse sans fil
Sierra de cadena inalámbrica
EN
F
ES
P02
P18
P32
2
PRODUCT SAFETY
WARNING: Some dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals known to
the state of California to cause cancer, birth defects
or other reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement and
other masonry products and
• Arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals:
Work in a well ventilated area, and
Work with approved safety equipment, such as those
dust masks that are specially designed to filter out
microscopic particles.
WARNING: This product can expose you to
chemicals including lead and Di(2-ethylhexyl)
phthalate (DEHP) which are known to the State of
California to cause cancer and birth defects or other
reproductive harm. For more information go to www.
P65Warnings.ca.gov.
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING: Read all safety warnings and
instructions.
Failure to follow the warnings
and instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
The term power tool in the warnings refer to your electric
(corded) power tool or battery-operated (cordless) power
tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you
to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with grounded power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with grounded surfaces such
as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.
Use of an RCD reduces the risk of
electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
A
moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always wear
eye protection.
Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking up
or carrying the tool.
Carrying power tools with your
finger on the switch or energizing power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control of
the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves away
from moving parts.
Loose clothes, jewelry or long
hair can be caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used.
Use of dust collection
can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application.
The correct power
tool will do the job better and safer at the rate for
which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools.
Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool.
Power tools are dangerous in the hands
of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tools operation.
If damaged, have the power tool
repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges are
3
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed.
Use of the power
tool for operations different from those intended could
result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
b) Use power tools only with specifically designated
battery packs.
Use of any other battery packs may
create a risk of injury and fire.
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal to
another.
Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be ejected
from the battery; avoid contact.
If contact
accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
6) Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
CHAIN SAW SAFETY
WARNINGS
1. Keep all parts of the body away from the saw
chain when the Chain saw is operating. Before
you start the Chain saw, make sure the saw chain
is not contacting anything.
A moment of inattention
while operating Chain saws may cause entanglement
of your clothing or body with the saw chain.
2. Always hold the Chain saw with your right hand
on the rear handle and your left hand on the front
handle.
Holding the Chain saw with a reversed hand
configuration increases the risk of personal injury and
should never be done.
3. Hold the power tool by insulated gripping
surfaces only, because the saw chain may
contact hidden wiring or its own cord.
Saw chains
contacting a live wire may make exposed metal parts
of the power tool live and could give the operator an
electric shock.
4. Wear safety glasses and hearing protection.
Further protective equipment for head, hands,
legs and feet is recommended.
Adequate protective
clothing will reduce personal injury by flying debris or
accidental contact with the saw chain.
5. Do not operate a Chain saw in a tree.
Operation of
a Chain saw while up in a tree may result in personal
injury.
6. Always keep proper footing and operate the
Chain saw only when standing on fixed, secure
and level surface.
Slippery or unstable surfaces such
as ladders may cause a loss of balance or control of
the Chain saw.
7. When cutting a limb that is under tension be
alert for spring back.
When the tension in the wood
fibers is released the spring loaded limb may strike the
operator and/or throw the Chain saw out of control.
8. Use extreme caution when cutting brush and
saplings.
The slender material may catch the saw
chain and be whipped toward you or pull you off
balance.
9. Carry the Chain saw by the front handle with the
Chain saw switched off and away from your body.
W
hen transporting or storing the Chain saw always
apply the guide bar cover. Proper handling of the Chain
saw will reduce the likelihood of accidental contact
with the moving saw chain.
10. Follow instructions for lubricating, chain
tensioning and changing accessories.
Improperly
tensioned or lubricated chain may either break or
increase the chance for kickback.
11. Keep handles dry, clean, and free from oil and
grease.
Greasy, oily handles are slippery causing loss
of control.
12. Cut wood only. Do not use Chain saw for purposes
not intended. For example: do not use Chain saw
for cutting plastic, masonry or non-wood building
materials.
Use of the Chain saw for operations
different than intended could result in a hazardous
situation.
CAUSES AND OPERATOR PREVENTION OF KICKBACK
Kickback may occur when the nose or tip of the guide bar
touches an object, or when the wood closes in and pinches
the saw chain in the cut.
Tip contact in some cases may cause a sudden reverse
reaction, kicking the guide bar up and back towards the
operator.
Pinching the saw chain along the top of the guide bar may
push the guide bar rapidly back towards the operator.
Either of these reactions may cause you to lose control of
the saw which could result in serious personal injury. Do
not rely exclusively upon the safety devices built into your
saw. As a Chain saw user, you should take several steps to
keep your cutting jobs free from accident or injury.
Kickback is the result of tool misuse and/or incorrect
operating procedures or conditions and can be avoided by
taking proper precautions as given below:
- Maintain a firm grip, with thumbs and fingers
encircling the Chain saw handles, with both
hands on the saw and position your body and arm
to allow you to resist kickback forces.
Kickback
forces can be controlled by the operator, if proper
precautions are taken. Do not let go of the Chain saw.
- Do not overreach and do not cut above shoulder
height.
This helps prevent unintended tip contact and
enables better control of the Chain saw in unexpected
situations.
- Only use
replacement bars and chains specified
by the manufacturer.
Incorrect replacement
bars and chains may cause chain breakage and/or
kickback.
- Follow the manufacturer’s sharpening and
maintenance instructions for the saw chain.
Decreasing the depth gauge height can lead to
increased kickback.
SAFETY WARNINGS FOR
BATTERY PACK
a) Do not dismantle, open or shred cells or battery
pack.
Product specificaties
| Merk: | Worx |
| Categorie: | Kettingzagen |
| Model: | WG385.9 |
Heb je hulp nodig?
Als je hulp nodig hebt met Worx WG385.9 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Kettingzagen Worx
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
Handleiding Kettingzagen
- Kettingzagen Alpina
- Kettingzagen Dolmar
- Kettingzagen Einhell
- Kettingzagen Hitachi
- Kettingzagen Husqvarna
- Kettingzagen Makita
- Kettingzagen McCulloch
- Kettingzagen Metabo
- Kettingzagen Remington
- Kettingzagen Ryobi
- Kettingzagen Sachs Dolmar
- Kettingzagen Solo
- Kettingzagen Sterwins
- Kettingzagen Stiga
- Kettingzagen Stihl
- Kettingzagen Tanaka
- Kettingzagen Ozito
- Kettingzagen Black And Decker
- Kettingzagen Ronix
- Kettingzagen Meec Tools
- Kettingzagen Cobra
- Kettingzagen Black Max
- Kettingzagen MacAllister
- Kettingzagen Nakayama
- Kettingzagen Poulan
- Kettingzagen Craftsman
- Kettingzagen Qualcast
Nieuwste handleidingen voor Kettingzagen
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022