Wooden Camera 175500 Handleiding

Wooden Camera Niet gecategoriseerd 175500

Lees hieronder de 📖 handleiding in het Nederlandse voor Wooden Camera 175500 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

UNIVERSAL LENS SUPPORT (19mm/15mm Studio)

ROLLING Y BRACKET 1/4-20

TIGHTENING

KNOB EXTENSIONS

SMALL & LARGE

19mm/15mm STUDIO

Included:

3/8-16

NOTE: LENS SUPPORT comes with factory installed

3/8-16 SCREW. To remove and install additional

adapters follow the steps below.

1. Select LENS SUPPORT, loosen thumscrew, locate and

loosen TIGHTENING KNOB 3/8-16. to remove

2. To switch from to , loosen and 19mm 15mm STUDIO

slide THUMBSCREW to desired position and re-tighten,

adjust the size by turning theROD CLAMP

.THUMBWHEELS

3. Choose desired adapter type. For example: select and

tighten Y BRACKET LARGE EXTENSIONto and install as

shown below.

4. Select LENS SUPPORT Y BRACKET, insert , insert

, adjust left or right position and up TIGHTENING KNOB

or down to proper lens height, tighten THUMBSCREW

until vertical & horizontal position is secure.

THUMBSCREW THUMBWHEEL

4. Place LENS SUPPORT RODS on and tighten using

.THUMBWHEELS

5. Unlock THUMBSCREW LENS , center position under

FOOT and re-tighten .THUMBSCREW

RODS

THUMBWHEEL

LENS LENS FOOT

LARGE EXTENSION

Product specificaties

Merk:	Wooden Camera
Categorie:	Niet gecategoriseerd
Model:	175500
Kleur van het product:	Black,Stainless steel
Gewicht:	208 g
Breedte:	142.8 mm
Diepte:	40.9 mm
Hoogte:	34.6 mm