White Knight WKCD40 Handleiding

White Knight Ventilator WKCD40

Lees hieronder de 📖 handleiding in het Nederlandse voor White Knight WKCD40 (5 pagina's) in de categorie Ventilator. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
WKCD40 ELECTRIC FAN
IMPORTANT INSTRUCTIONS
1. Read all instructions carefully before you use the appliance.
2. Remove the packaging and ensure that the appliance is undamaged. In case
of doubt do not use the fan and contact your supplier.
3. Do not let children play with parts of the packaging (such as plastic bags).
4. Before plugging the fan into the socket, check that the voltage of your mains
supply matches the voltage marked on the rating label of the appliance.
5. Before assembling or dismantling the fan, ensure that the fan is unplugged.
6. Before unplugging the supply cord, turn off the switch at the socket outlet.
7. Do not insert any object into the guard while the fan is operating.
WARNING: RISK OF INJURY.
8. The fan is meant for use in temperate climates. Do not use the fan in high
humidity or a dusty area.
9. Do not hang any clothes on the fan guards.
10. Do not use the fan outdoors.
INSTRUCTION MANUAL
Description of Parts
Caution
This appliance is for household use only. Any servicing other than cleaning
and user maintenance should be performed by an authorised service
representative. Do not immerse the unit in water. To reduce the risk of fire or
electric shock, do not remove the housing. The fan has no user serviceable parts
inside. Only authorised service personnel should handle repair work.
If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similar qualified person in order to avoid a hazard.
Assembly of the base
1. Remove the base mounting nut from the stand
by turning it anti-clockwise.
2. Feed the supply cord through the opening in
the base.
3. Insert the stand into the base and tighten the
base mounting nut clockwise
4. Lead the supply cord through the recess at
the side of the base.
Assembly of the fan
1. Remove the blade cap from the motor shaft and remove the guard lock nut
from the motor body.
2. Fit the rear guard to the motor body, by positioning on the location pins.
Secure the guard to the motor body with the guard lock nut.
3. Push the fan blade onto the motor shaft by matching the slots on the base of
the fan blade with the shaft pin. Secure the blade with the blade cap, turning
it in an anti-clockwise direction. Check that the fan blade rotates freely by
turning it with your hand.
4. Open the securing clip at the bottom of the front guard and loosen the clip
screw. Position the top clip on the uppermost part of the rear guard. Push
the top clip down and press rim of the front guard onto the rear guard.
Close the bottom clip and tighten the screw.
Operations
1. 3-Step Speed Control
OFF 0
LOW 1
MEDIUM 2
HIGH 3

Product specificaties

Merk: White Knight
Categorie: Ventilator
Model: WKCD40

Heb je hulp nodig?

Als je hulp nodig hebt met White Knight WKCD40 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Ventilator White Knight

White Knight

White Knight WKCD40 Handleiding

10 Maart 2023

Handleiding Ventilator

Nieuwste handleidingen voor Ventilator

Delonghi

Delonghi DETF122 Handleiding

1 Mei 2024
LC-Power

LC-Power LC-CFC-2 Handleiding

25 April 2024
Bimar

Bimar VB50 Handleiding

25 April 2024
Bimar

Bimar VPC100 Handleiding

25 April 2024
Bimar

Bimar VI94 Handleiding

22 April 2024
Livoo

Livoo DOM488 Handleiding

20 April 2024
GoldAir

GoldAir GAS10 Handleiding

17 April 2024
Heller

Heller HHDF23S Handleiding

17 April 2024
GoldAir

GoldAir GCTF530 Handleiding

16 April 2024
Gamdias

Gamdias Aeolus M2-1201 Handleiding

16 April 2024